FM / mibs

/usr/share/snmp/mibs

Name	Size	Mode	Actions
AGENTX-MIB.txt	17455	0644	edit dl rm
BRIDGE-MIB.txt	50948	0644	edit dl rm
DISMAN-EVENT-MIB.txt	68104	0644	edit dl rm
DISMAN-SCHEDULE-MIB.txt	24613	0644	edit dl rm
DISMAN-SCRIPT-MIB.txt	64311	0644	edit dl rm
EtherLike-MIB.txt	84492	0644	edit dl rm
HCNUM-TC.txt	4660	0644	edit dl rm
HOST-RESOURCES-MIB.txt	52544	0644	edit dl rm
HOST-RESOURCES-TYPES.txt	10583	0644	edit dl rm
IANA-ADDRESS-FAMILY-NUMBERS-MIB.txt	6713	0644	edit dl rm
IANA-LANGUAGE-MIB.txt	4387	0644	edit dl rm
IANA-RTPROTO-MIB.txt	4098	0644	edit dl rm
IANAifType-MIB.txt	35384	0644	edit dl rm
IF-INVERTED-STACK-MIB.txt	5066	0644	edit dl rm
IF-MIB.txt	71691	0644	edit dl rm
INET-ADDRESS-MIB.txt	16782	0644	edit dl rm
IP-FORWARD-MIB.txt	46286	0644	edit dl rm
IP-MIB.txt	185667	0644	edit dl rm
IPV6-FLOW-LABEL-MIB.txt	2028	0644	edit dl rm
IPV6-ICMP-MIB.txt	21057	0644	edit dl rm
IPV6-MIB.txt	56463	0644	edit dl rm
IPV6-TC.txt	3154	0644	edit dl rm
IPV6-TCP-MIB.txt	8858	0644	edit dl rm
IPV6-UDP-MIB.txt	5698	0644	edit dl rm
LM-SENSORS-MIB.txt	5931	0644	edit dl rm
MTA-MIB.txt	42375	0644	edit dl rm
NET-SNMP-AGENT-MIB.txt	15901	0644	edit dl rm
NET-SNMP-EXAMPLES-MIB.txt	9160	0644	edit dl rm
NET-SNMP-EXTEND-MIB.txt	9326	0644	edit dl rm
NET-SNMP-MIB.txt	2036	0644	edit dl rm
NET-SNMP-PASS-MIB.txt	3730	0644	edit dl rm
NET-SNMP-TC.txt	4814	0644	edit dl rm
NET-SNMP-VACM-MIB.txt	5039	0644	edit dl rm
NETWORK-SERVICES-MIB.txt	21006	0644	edit dl rm
NOTIFICATION-LOG-MIB.txt	24694	0644	edit dl rm
RFC-1215.txt	1174	0644	edit dl rm
RFC1155-SMI.txt	3067	0644	edit dl rm
RFC1213-MIB.txt	79667	0644	edit dl rm
RMON-MIB.txt	147822	0644	edit dl rm
SCTP-MIB.txt	45323	0644	edit dl rm
SMUX-MIB.txt	4649	0644	edit dl rm
SNMP-COMMUNITY-MIB.txt	15490	0644	edit dl rm
SNMP-FRAMEWORK-MIB.txt	22342	0644	edit dl rm
SNMP-MPD-MIB.txt	5496	0644	edit dl rm
SNMP-NOTIFICATION-MIB.txt	20014	0644	edit dl rm
SNMP-PROXY-MIB.txt	9106	0644	edit dl rm
SNMP-TARGET-MIB.txt	22769	0644	edit dl rm
SNMP-TLS-TM-MIB.txt	43927	0644	edit dl rm
SNMP-TSM-MIB.txt	8912	0644	edit dl rm
SNMP-USER-BASED-SM-MIB.txt	39201	0644	edit dl rm
SNMP-USM-AES-MIB.txt	2205	0644	edit dl rm
SNMP-USM-DH-OBJECTS-MIB.txt	21101	0644	edit dl rm
SNMP-USM-HMAC-SHA2-MIB.txt	4400	0644	edit dl rm
SNMP-VIEW-BASED-ACM-MIB.txt	34162	0644	edit dl rm
SNMPv2-CONF.txt	8263	0644	edit dl rm
SNMPv2-MIB.txt	29305	0644	edit dl rm
SNMPv2-SMI.txt	8924	0644	edit dl rm
SNMPv2-TC.txt	38034	0644	edit dl rm
SNMPv2-TM.txt	5775	0644	edit dl rm
TCP-MIB.txt	28564	0644	edit dl rm
TRANSPORT-ADDRESS-MIB.txt	16418	0644	edit dl rm
TUNNEL-MIB.txt	27826	0644	edit dl rm
UCD-DEMO-MIB.txt	2163	0644	edit dl rm
UCD-DISKIO-MIB.txt	4965	0644	edit dl rm
UCD-DLMOD-MIB.txt	3087	0644	edit dl rm
UCD-IPFWACC-MIB.txt	8118	0644	edit dl rm
UCD-SNMP-MIB.txt	53338	0644	edit dl rm
UDP-MIB.txt	20882	0644	edit dl rm

Edit: /usr/share/snmp/mibs/UCD-IPFWACC-MIB.txt (8118B)

UCD-IPFWACC-MIB DEFINITIONS ::= BEGIN

IMPORTS
    OBJECT-TYPE, MODULE-IDENTITY, IpAddress, Integer32, Counter32
	FROM SNMPv2-SMI
    DisplayString
	FROM SNMPv2-TC
    ucdExperimental
	FROM UCD-SNMP-MIB;

ucdIpFwAccMIB MODULE-IDENTITY
    LAST-UPDATED "9912160000Z"
    ORGANIZATION "University of California, Davis"
    CONTACT-INFO    
	"This mib is no longer being maintained by the University of
	 California and is now in life-support-mode and being
	 maintained by the net-snmp project.  The best place to write
	 for public questions about the net-snmp-coders mailing list
	 at net-snmp-coders@lists.sourceforge.net.

postal:   Wes Hardaker
                   P.O. Box 382
                   Davis CA  95617

email:    net-snmp-coders@lists.sourceforge.net
        "
    DESCRIPTION
	"This module defines MIB components for reading information
         from the accounting rules IP Firewall. This would typically
         let you read the rules and the counters. I did not include
         some flags and fields that I considered irrelevant for the
         accounting rules. Resetting the counters of the rules by SNMP
         would be simple, but I don't consider it so useful. I gave no
         consideration to implementing write access for allowing
         modification of the accounting rules.

Cristian.Estan@net.utcluj.ro "
    REVISION	 "9912160000Z"
    DESCRIPTION
	"SMIv2 version converted from an older MIB definition."
    ::= { ucdExperimental 1 }

ipFwAccTable OBJECT-TYPE
    SYNTAX	SEQUENCE OF IpFwAccEntry
    MAX-ACCESS	not-accessible
    STATUS	current
    DESCRIPTION
	"A table with the accounting rules of the IP firewall"
    ::= { ucdIpFwAccMIB 1 }

ipFwAccEntry OBJECT-TYPE
    SYNTAX	IpFwAccEntry
    MAX-ACCESS	not-accessible
    STATUS	current
    DESCRIPTION
	"An accounting rule of the IP firewall"
    INDEX	{ ipFwAccIndex }
    ::= { ipFwAccTable 1 }

IpFwAccEntry ::= SEQUENCE {
    ipFwAccIndex	Integer32,
    ipFwAccSrcAddr	IpAddress,
    ipFwAccSrcNetMask	IpAddress,
    ipFwAccDstAddr	IpAddress,
    ipFwAccDstNetMask	IpAddress,
    ipFwAccViaName	DisplayString,
    ipFwAccViaAddr	IpAddress,
    ipFwAccProto	INTEGER,
    ipFwAccBidir	INTEGER,
    ipFwAccDir		INTEGER,
    ipFwAccBytes	Counter32,
    ipFwAccPackets	Counter32,
    ipFwAccNrSrcPorts	Integer32,
    ipFwAccNrDstPorts	Integer32,
    ipFwAccSrcIsRange	INTEGER,
    ipFwAccDstIsRange	INTEGER,
    ipFwAccPort1	Integer32,
    ipFwAccPort2	Integer32,
    ipFwAccPort3	Integer32,
    ipFwAccPort4	Integer32,
    ipFwAccPort5	Integer32,
    ipFwAccPort6	Integer32,
    ipFwAccPort7	Integer32,
    ipFwAccPort8	Integer32,
    ipFwAccPort9	Integer32,
    ipFwAccPort10	Integer32
}

ipFwAccIndex OBJECT-TYPE
    SYNTAX	Integer32 (0..2147483647)
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"Reference index for each firewall rule."
    ::= { ipFwAccEntry 1 }

ipFwAccSrcAddr OBJECT-TYPE
    SYNTAX	IpAddress
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The source address in the firewall rule."
    ::= { ipFwAccEntry 2 }

ipFwAccSrcNetMask OBJECT-TYPE
    SYNTAX	IpAddress
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The netmask of the source address in the firewall rule."
    ::= { ipFwAccEntry 3 }

ipFwAccDstAddr OBJECT-TYPE
    SYNTAX	IpAddress
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The destination address in the firewall rule."
    ::= { ipFwAccEntry 4 }

ipFwAccDstNetMask OBJECT-TYPE
    SYNTAX	IpAddress
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The netmask of the destination address in the firewall rule."
    ::= { ipFwAccEntry 5 }

ipFwAccViaName OBJECT-TYPE
    SYNTAX	DisplayString (SIZE(1..64))
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The name of the interface to which the rule applies. If no
	 interface is associated with the present rule, this should
	 contain a dash (-)."
    ::= { ipFwAccEntry 6 }

ipFwAccViaAddr OBJECT-TYPE
    SYNTAX	IpAddress
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The address of the interface to which the rule applies.
	 Using this parameter makes sense when multiple addresses are
	 associated to the same physical interface. If not defined
	 for the current rule this should be set to 0."
    ::= { ipFwAccEntry 7 }

ipFwAccProto OBJECT-TYPE
    SYNTAX	INTEGER {
		    other(1),
		    all(2),
		    tcp(3),
		    udp(4),
		    icmp(5)
		}
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The protocol(s) to which the rule applies."
    ::= { ipFwAccEntry 8 }

ipFwAccBidir OBJECT-TYPE
    SYNTAX	INTEGER {
		    unidirectional(1),
		    bidirectional(2)
		}
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"Whether the rule works in both directions (i.e. with the
	 source and destination parts swapped) or not."
    ::= { ipFwAccEntry 9 }

ipFwAccDir OBJECT-TYPE
    SYNTAX	INTEGER {
		    both(1),
		    in(2),
		    out(3)
		}
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"Whether the rule applies to packets entering or exiting the
	 kernel."
    ::= { ipFwAccEntry 10 }

ipFwAccBytes OBJECT-TYPE
    SYNTAX	Counter32
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The number of bytes that matched this rule since the last
	 reset of the counters."
    ::= { ipFwAccEntry 11 }

ipFwAccPackets OBJECT-TYPE
    SYNTAX	Counter32
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The number of packets that matched this rule since the last
	 reset of the counters."
    ::= { ipFwAccEntry 12 }

ipFwAccNrSrcPorts OBJECT-TYPE
    SYNTAX	Integer32
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The number of ports that refer to the source address."
    ::= { ipFwAccEntry 13 }

ipFwAccNrDstPorts OBJECT-TYPE
    SYNTAX	Integer32 
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The number of ports that refer to the destination address."
    ::= { ipFwAccEntry 14 }

ipFwAccSrcIsRange OBJECT-TYPE
    SYNTAX	INTEGER {
		    srchasrange(1),
		    srchasnorange(2)
		}
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"Interpret the first two ports of the source part as
	 the upper and lower limit of an interval or not."
    ::= { ipFwAccEntry 15 }

ipFwAccDstIsRange OBJECT-TYPE
    SYNTAX	INTEGER {
		    dsthasrange(1),
		    dsthasnorange(2)
		}
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"Interpret the first two ports of the destination part as
	 the upper and lower limit of an interval or not."
    ::= { ipFwAccEntry 16 }

ipFwAccPort1 OBJECT-TYPE
    SYNTAX	Integer32
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"Port number 1."
    ::= { ipFwAccEntry 17 }

ipFwAccPort2 OBJECT-TYPE
    SYNTAX	Integer32
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"Port number 2."
    ::= { ipFwAccEntry 18 }

ipFwAccPort3 OBJECT-TYPE
    SYNTAX	Integer32
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"Port number 3."
    ::= { ipFwAccEntry 19 }

ipFwAccPort4 OBJECT-TYPE
    SYNTAX	Integer32
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"Port number 4."
    ::= { ipFwAccEntry 20 }

ipFwAccPort5 OBJECT-TYPE
    SYNTAX	Integer32
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"Port number 5."
    ::= { ipFwAccEntry 21 }

ipFwAccPort6 OBJECT-TYPE
    SYNTAX	Integer32 
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"Port number 6."
    ::= { ipFwAccEntry 22 }

ipFwAccPort7 OBJECT-TYPE
    SYNTAX	Integer32
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"Port number 7."
    ::= { ipFwAccEntry 23 }

ipFwAccPort8 OBJECT-TYPE
    SYNTAX	Integer32
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"Port number 8."
    ::= { ipFwAccEntry 24 }

ipFwAccPort9 OBJECT-TYPE
     SYNTAX	Integer32
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"Port number 9."
    ::= { ipFwAccEntry 25 }

ipFwAccPort10 OBJECT-TYPE
    SYNTAX	Integer32
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"Port number 10."
    ::= { ipFwAccEntry 26 }

END

cmd: