FM / pod

/usr/share/perl5/pod

Name	Size	Mode	Actions
perl.pod	16270	0644	edit dl rm
perl56delta.pod	107201	0644	edit dl rm
perl58delta.pod	115165	0644	edit dl rm
perl561delta.pod	124713	0644	edit dl rm
perl581delta.pod	38061	0644	edit dl rm
perl582delta.pod	4470	0644	edit dl rm
perl583delta.pod	6335	0644	edit dl rm
perl584delta.pod	7363	0644	edit dl rm
perl585delta.pod	5889	0644	edit dl rm
perl586delta.pod	4651	0644	edit dl rm
perl587delta.pod	8357	0644	edit dl rm
perl588delta.pod	25272	0644	edit dl rm
perl589delta.pod	53900	0644	edit dl rm
perl5004delta.pod	56240	0644	edit dl rm
perl5005delta.pod	34283	0644	edit dl rm
perl5100delta.pod	55535	0644	edit dl rm
perl5101delta.pod	43888	0644	edit dl rm
perl5120delta.pod	89272	0644	edit dl rm
perl5121delta.pod	10141	0644	edit dl rm
perl5122delta.pod	9603	0644	edit dl rm
perl5123delta.pod	4100	0644	edit dl rm
perl5124delta.pod	3672	0644	edit dl rm
perl5125delta.pod	7683	0644	edit dl rm
perl5140delta.pod	144324	0644	edit dl rm
perl5141delta.pod	7966	0644	edit dl rm
perl5142delta.pod	6892	0644	edit dl rm
perl5143delta.pod	7760	0644	edit dl rm
perl5144delta.pod	6327	0644	edit dl rm
perl5160delta.pod	133651	0644	edit dl rm
perl5161delta.pod	6142	0644	edit dl rm
perl5162delta.pod	3594	0644	edit dl rm
perl5163delta.pod	4085	0644	edit dl rm
perl5180delta.pod	119431	0644	edit dl rm
perl5181delta.pod	6595	0644	edit dl rm
perl5182delta.pod	5335	0644	edit dl rm
perl5184delta.pod	4642	0644	edit dl rm
perl5200delta.pod	115699	0644	edit dl rm
perl5201delta.pod	10899	0644	edit dl rm
perl5202delta.pod	12509	0644	edit dl rm
perl5203delta.pod	9392	0644	edit dl rm
perl5220delta.pod	130963	0644	edit dl rm
perl5221delta.pod	10767	0644	edit dl rm
perl5222delta.pod	12629	0644	edit dl rm
perl5223delta.pod	8456	0644	edit dl rm
perl5224delta.pod	4460	0644	edit dl rm
perl5240delta.pod	64927	0644	edit dl rm
perl5241delta.pod	8215	0644	edit dl rm
perl5242delta.pod	4113	0644	edit dl rm
perl5243delta.pod	11428	0644	edit dl rm
perl5244delta.pod	4510	0644	edit dl rm
perl5260delta.pod	101836	0644	edit dl rm
perl5261delta.pod	7927	0644	edit dl rm
perl5262delta.pod	7880	0644	edit dl rm
perl5263delta.pod	7063	0644	edit dl rm
perl5280delta.pod	72113	0644	edit dl rm
perlaix.pod	20437	0644	edit dl rm
perlamiga.pod	5749	0644	edit dl rm
perlandroid.pod	7871	0644	edit dl rm
perlapi.pod	443535	0644	edit dl rm
perlapio.pod	19285	0644	edit dl rm
perlartistic.pod	7010	0644	edit dl rm
perlbook.pod	8338	0644	edit dl rm
perlboot.pod	294	0644	edit dl rm
perlbot.pod	304	0644	edit dl rm
perlbs2000.pod	8058	0644	edit dl rm
perlcall.pod	56706	0644	edit dl rm
perlce.pod	14602	0644	edit dl rm
perlcheat.pod	4481	0644	edit dl rm
perlclib.pod	9619	0644	edit dl rm
perlcn.pod	4691	0644	edit dl rm
perlcommunity.pod	7217	0644	edit dl rm
perlcygwin.pod	27199	0644	edit dl rm
perldata.pod	46743	0644	edit dl rm
perldbmfilter.pod	4981	0644	edit dl rm
perldebguts.pod	38535	0644	edit dl rm
perldebtut.pod	22152	0644	edit dl rm
perldebug.pod	39258	0644	edit dl rm
perldelta.pod	7063	0644	edit dl rm
perldeprecation.pod	18169	0644	edit dl rm
perldiag.pod	284572	0644	edit dl rm
perldos.pod	10522	0644	edit dl rm
perldsc.pod	25614	0644	edit dl rm
perldtrace.pod	7958	0644	edit dl rm
perlebcdic.pod	84233	0644	edit dl rm
perlembed.pod	37196	0644	edit dl rm
perlexperiment.pod	7195	0644	edit dl rm
perlfork.pod	13355	0644	edit dl rm
perlform.pod	16608	0644	edit dl rm
perlfreebsd.pod	1610	0644	edit dl rm
perlfunc.pod	392957	0644	edit dl rm
perlgit.pod	33509	0644	edit dl rm
perlgpl.pod	13815	0644	edit dl rm
perlguts.pod	139329	0644	edit dl rm
perlhack.pod	40445	0644	edit dl rm
perlhacktips.pod	55509	0644	edit dl rm
perlhacktut.pod	6153	0644	edit dl rm
perlhaiku.pod	1508	0644	edit dl rm
perlhist.pod	53546	0644	edit dl rm
perlhpux.pod	30509	0644	edit dl rm
perlhurd.pod	1993	0644	edit dl rm
perlintern.pod	54572	0644	edit dl rm
perlinterp.pod	33687	0644	edit dl rm
perlintro.pod	22119	0644	edit dl rm
perliol.pod	34185	0644	edit dl rm
perlipc.pod	70829	0644	edit dl rm
perlirix.pod	4395	0644	edit dl rm
perljp.pod	7521	0644	edit dl rm
perlko.pod	12259	0644	edit dl rm
perllexwarn.pod	355	0644	edit dl rm
perllinux.pod	1488	0644	edit dl rm
perllocale.pod	68678	0644	edit dl rm
perllol.pod	9580	0644	edit dl rm
perlmacos.pod	1001	0644	edit dl rm
perlmacosx.pod	12060	0644	edit dl rm
perlmod.pod	26250	0644	edit dl rm
perlmodinstall.pod	12792	0644	edit dl rm
perlmodlib.pod	76482	0644	edit dl rm
perlmodstyle.pod	22575	0644	edit dl rm
perlmroapi.pod	3212	0644	edit dl rm
perlnetware.pod	6648	0644	edit dl rm
perlnewmod.pod	11036	0644	edit dl rm
perlnumber.pod	8353	0644	edit dl rm
perlobj.pod	35537	0644	edit dl rm
perlootut.pod	26783	0644	edit dl rm
perlop.pod	136252	0644	edit dl rm
perlopenbsd.pod	1204	0644	edit dl rm
perlopentut.pod	9455	0644	edit dl rm
perlos2.pod	93351	0644	edit dl rm
perlos390.pod	15674	0644	edit dl rm
perlos400.pod	4768	0644	edit dl rm
perlpacktut.pod	51282	0644	edit dl rm
perlperf.pod	49881	0644	edit dl rm
perlplan9.pod	5125	0644	edit dl rm
perlpod.pod	22196	0644	edit dl rm
perlpodspec.pod	68476	0644	edit dl rm
perlpolicy.pod	25629	0644	edit dl rm
perlport.pod	87602	0644	edit dl rm
perlpragma.pod	5176	0644	edit dl rm
perlqnx.pod	6673	0644	edit dl rm
perlre.pod	120901	0644	edit dl rm
perlreapi.pod	30334	0644	edit dl rm
perlrebackslash.pod	31817	0644	edit dl rm
perlrecharclass.pod	49029	0644	edit dl rm
perlref.pod	35304	0644	edit dl rm
perlreftut.pod	18790	0644	edit dl rm
perlreguts.pod	38328	0644	edit dl rm
perlrepository.pod	509	0644	edit dl rm
perlrequick.pod	18497	0644	edit dl rm
perlreref.pod	14744	0644	edit dl rm
perlretut.pod	121257	0644	edit dl rm
perlriscos.pod	1529	0644	edit dl rm
perlrun.pod	53550	0644	edit dl rm
perlsec.pod	26184	0644	edit dl rm
perlsolaris.pod	29822	0644	edit dl rm
perlsource.pod	6876	0644	edit dl rm
perlstyle.pod	8630	0644	edit dl rm
perlsub.pod	72967	0644	edit dl rm
perlsymbian.pod	15359	0644	edit dl rm
perlsyn.pod	44512	0644	edit dl rm
perlsynology.pod	7778	0644	edit dl rm
perlthrtut.pod	46459	0644	edit dl rm
perltie.pod	38607	0644	edit dl rm
perltoc.pod	694171	0644	edit dl rm
perltodo.pod	376	0644	edit dl rm
perltooc.pod	294	0644	edit dl rm
perltoot.pod	294	0644	edit dl rm
perltrap.pod	10620	0644	edit dl rm
perltru64.pod	8492	0644	edit dl rm
perltw.pod	4477	0644	edit dl rm
perlunicode.pod	82491	0644	edit dl rm
perlunicook.pod	25488	0644	edit dl rm
perlunifaq.pod	13647	0644	edit dl rm
perluniintro.pod	38340	0644	edit dl rm
perluniprops.pod	285306	0644	edit dl rm
perlunitut.pod	7951	0644	edit dl rm
perlutil.pod	7640	0644	edit dl rm
perlvar.pod	78364	0644	edit dl rm
perlvms.pod	50823	0644	edit dl rm
perlvos.pod	3843	0644	edit dl rm
perlwin32.pod	39298	0644	edit dl rm
perlxs.pod	78920	0644	edit dl rm
perlxstut.pod	50095	0644	edit dl rm
perlxstypemap.pod	24001	0644	edit dl rm

Edit: /usr/share/perl5/pod/perl5100delta.pod (55535B)

=encoding utf8

=head1 NAME

perl5100delta - what is new for perl 5.10.0

=head1 DESCRIPTION

This document describes the differences between the 5.8.8 release and
the 5.10.0 release.

Many of the bug fixes in 5.10.0 were already seen in the 5.8.X maintenance
releases; they are not duplicated here and are documented in the set of
man pages named perl58[1-8]?delta.

=head1 Core Enhancements

=head2 The C<feature> pragma

The C<feature> pragma is used to enable new syntax that would break Perl's
backwards-compatibility with older releases of the language. It's a lexical
pragma, like C<strict> or C<warnings>.

Currently the following new features are available: C<switch> (adds a
switch statement), C<say> (adds a C<say> built-in function), and C<state>
(adds a C<state> keyword for declaring "static" variables). Those
features are described in their own sections of this document.

The C<feature> pragma is also implicitly loaded when you require a minimal
perl version (with the C<use VERSION> construct) greater than, or equal
to, 5.9.5. See L<feature> for details.

=head2 New B<-E> command-line switch

B<-E> is equivalent to B<-e>, but it implicitly enables all
optional features (like C<use feature ":5.10">).

=head2 Defined-or operator

A new operator C<//> (defined-or) has been implemented.
The following expression:

$a // $b

is merely equivalent to

defined $a ? $a : $b

and the statement

$c //= $d;

can now be used instead of

$c = $d unless defined $c;

The C<//> operator has the same precedence and associativity as C<||>.
Special care has been taken to ensure that this operator Do What You Mean
while not breaking old code, but some edge cases involving the empty
regular expression may now parse differently. See L<perlop> for
details.

=head2 Switch and Smart Match operator

Perl 5 now has a switch statement. It's available when C<use feature
'switch'> is in effect. This feature introduces three new keywords,
C<given>, C<when>, and C<default>:

given ($foo) {
	when (/^abc/) { $abc = 1; }
	when (/^def/) { $def = 1; }
	when (/^xyz/) { $xyz = 1; }
	default { $nothing = 1; }
    }

A more complete description of how Perl matches the switch variable
against the C<when> conditions is given in L<perlsyn/"Switch statements">.

This kind of match is called I<smart match>, and it's also possible to use
it outside of switch statements, via the new C<~~> operator. See
L<perlsyn/"Smart matching in detail">.

This feature was contributed by Robin Houston.

=head2 Regular expressions

=over 4

=item Recursive Patterns

It is now possible to write recursive patterns without using the C<(??{})>
construct. This new way is more efficient, and in many cases easier to
read.

Each capturing parenthesis can now be treated as an independent pattern
that can be entered by using the C<(?PARNO)> syntax (C<PARNO> standing for
"parenthesis number"). For example, the following pattern will match
nested balanced angle brackets:

/
 ^ # start of line
 ( # start capture buffer 1
	< # match an opening angle bracket
	(?: # match one of:
	 (?> # don't backtrack over the inside of this group
	 [^<>]+ # one or more non angle brackets
	 ) # end non backtracking group
	| # ... or ...
	 (?1) # recurse to bracket 1 and try it again
	)* # 0 or more times.
	> # match a closing angle bracket
 ) # end capture buffer one
 $ # end of line
 /x

PCRE users should note that Perl's recursive regex feature allows
backtracking into a recursed pattern, whereas in PCRE the recursion is
atomic or "possessive" in nature.  As in the example above, you can
add (?>) to control this selectively.  (Yves Orton)

=item Named Capture Buffers

It is now possible to name capturing parenthesis in a pattern and refer to
the captured contents by name. The naming syntax is C<< (?<NAME>....) >>.
It's possible to backreference to a named buffer with the C<< \k<NAME> >>
syntax. In code, the new magical hashes C<%+> and C<%-> can be used to
access the contents of the capture buffers.

Thus, to replace all doubled chars with a single copy, one could write

s/(?<letter>.)\k<letter>/$+{letter}/g

Only buffers with defined contents will be "visible" in the C<%+> hash, so
it's possible to do something like

foreach my $name (keys %+) {
        print "content of buffer '$name' is $+{$name}\n";
    }

The C<%-> hash is a bit more complete, since it will contain array refs
holding values from all capture buffers similarly named, if there should
be many of them.

C<%+> and C<%-> are implemented as tied hashes through the new module
C<Tie::Hash::NamedCapture>.

Users exposed to the .NET regex engine will find that the perl
implementation differs in that the numerical ordering of the buffers
is sequential, and not "unnamed first, then named". Thus in the pattern

/(A)(?B)(C)(?<D>D)/

$1 will be 'A', $2 will be 'B', $3 will be 'C' and $4 will be 'D' and not
$1 is 'A', $2 is 'C' and $3 is 'B' and $4 is 'D' that a .NET programmer
would expect. This is considered a feature. :-) (Yves Orton)

=item Possessive Quantifiers

Perl now supports the "possessive quantifier" syntax of the "atomic match"
pattern. Basically a possessive quantifier matches as much as it can and never
gives any back. Thus it can be used to control backtracking. The syntax is
similar to non-greedy matching, except instead of using a '?' as the modifier
the '+' is used. Thus C<?+>, C<*+>, C<++>, C<{min,max}+> are now legal
quantifiers. (Yves Orton)

=item Backtracking control verbs

The regex engine now supports a number of special-purpose backtrack
control verbs: (*THEN), (*PRUNE), (*MARK), (*SKIP), (*COMMIT), (*FAIL)
and (*ACCEPT). See L<perlre> for their descriptions. (Yves Orton)

=item Relative backreferences

A new syntax C<\g{N}> or C<\gN> where "N" is a decimal integer allows a
safer form of back-reference notation as well as allowing relative
backreferences. This should make it easier to generate and embed patterns
that contain backreferences. See L<perlre/"Capture buffers">. (Yves Orton)

=item C<\K> escape

The functionality of Jeff Pinyan's module Regexp::Keep has been added to
the core. In regular expressions you can now use the special escape C<\K>
as a way to do something like floating length positive lookbehind. It is
also useful in substitutions like:

s/(foo)bar/$1/g

that can now be converted to

s/foo\Kbar//g

which is much more efficient. (Yves Orton)

=item Vertical and horizontal whitespace, and linebreak

Regular expressions now recognize the C<\v> and C<\h> escapes that match
vertical and horizontal whitespace, respectively. C<\V> and C<\H>
logically match their complements.

C<\R> matches a generic linebreak, that is, vertical whitespace, plus
the multi-character sequence C<"\x0D\x0A">.

=item Optional pre-match and post-match captures with the /p flag

There is a new flag C for regular expressions. Using this
makes the engine preserve a copy of the part of the matched string before
the matching substring to the new special variable C<${^PREMATCH}>, the
part after the matching substring to C<${^POSTMATCH}>, and the matched
substring itself to C<${^MATCH}>.

Perl is still able to store these substrings to the special variables
C<$`>, C<$'>, C<$&>, but using these variables anywhere in the program
adds a penalty to all regular expression matches, whereas if you use
the C flag and the new special variables instead, you pay only for
the regular expressions where the flag is used.

For more detail on the new variables, see L<perlvar>; for the use of
the regular expression flag, see L<perlop> and L<perlre>.

=back

=head2 C<say()>

say() is a new built-in, only available when C<use feature 'say'> is in
effect, that is similar to print(), but that implicitly appends a newline
to the printed string. See L<perlfunc/say>. (Robin Houston)

=head2 Lexical C<$_>

The default variable C<$_> can now be lexicalized, by declaring it like
any other lexical variable, with a simple

my $_;

The operations that default on C<$_> will use the lexically-scoped
version of C<$_> when it exists, instead of the global C<$_>.

In a C<map> or a C<grep> block, if C<$_> was previously my'ed, then the
C<$_> inside the block is lexical as well (and scoped to the block).

In a scope where C<$_> has been lexicalized, you can still have access to
the global version of C<$_> by using C<$::_>, or, more simply, by
overriding the lexical declaration with C<our $_>. (Rafael Garcia-Suarez)

=head2 The C<_> prototype

A new prototype character has been added. C<_> is equivalent to C<$> but
defaults to C<$_> if the corresponding argument isn't supplied (both C<$>
and C<_> denote a scalar). Due to the optional nature of the argument, 
you can only use it at the end of a prototype, or before a semicolon.

This has a small incompatible consequence: the prototype() function has
been adjusted to return C<_> for some built-ins in appropriate cases (for
example, C<prototype('CORE::rmdir')>). (Rafael Garcia-Suarez)

=head2 UNITCHECK blocks

C<UNITCHECK>, a new special code block has been introduced, in addition to
C<BEGIN>, C<CHECK>, C<INIT> and C<END>.

C<CHECK> and C<INIT> blocks, while useful for some specialized purposes,
are always executed at the transition between the compilation and the
execution of the main program, and thus are useless whenever code is
loaded at runtime. On the other hand, C<UNITCHECK> blocks are executed
just after the unit which defined them has been compiled. See L<perlmod>
for more information. (Alex Gough)

=head2 New Pragma, C<mro>

A new pragma, C<mro> (for Method Resolution Order) has been added. It
permits to switch, on a per-class basis, the algorithm that perl uses to
find inherited methods in case of a multiple inheritance hierarchy. The
default MRO hasn't changed (DFS, for Depth First Search). Another MRO is
available: the C3 algorithm. See L<mro> for more information.
(Brandon Black)

Note that, due to changes in the implementation of class hierarchy search,
code that used to undef the C<*ISA> glob will most probably break. Anyway,
undef'ing C<*ISA> had the side-effect of removing the magic on the @ISA
array and should not have been done in the first place. Also, the
cache C<*::ISA::CACHE::> no longer exists; to force reset the @ISA cache,
you now need to use the C<mro> API, or more simply to assign to @ISA
(e.g. with C<@ISA = @ISA>).

=head2 readdir() may return a "short filename" on Windows

The readdir() function may return a "short filename" when the long
filename contains characters outside the ANSI codepage.  Similarly
Cwd::cwd() may return a short directory name, and glob() may return short
names as well.  On the NTFS file system these short names can always be
represented in the ANSI codepage.  This will not be true for all other file
system drivers; e.g. the FAT filesystem stores short filenames in the OEM
codepage, so some files on FAT volumes remain unaccessible through the
ANSI APIs.

Similarly, $^X, @INC, and $ENV{PATH} are preprocessed at startup to make
sure all paths are valid in the ANSI codepage (if possible).

The Win32::GetLongPathName() function now returns the UTF-8 encoded
correct long file name instead of using replacement characters to force
the name into the ANSI codepage.  The new Win32::GetANSIPathName()
function can be used to turn a long pathname into a short one only if the
long one cannot be represented in the ANSI codepage.

Many other functions in the C<Win32> module have been improved to accept
UTF-8 encoded arguments. Please see L<Win32> for details.

=head2 readpipe() is now overridable

The built-in function readpipe() is now overridable. Overriding it permits
also to override its operator counterpart, C<qx//> (a.k.a. C<``>).
Moreover, it now defaults to C<$_> if no argument is provided. (Rafael
Garcia-Suarez)

=head2 Default argument for readline()

readline() now defaults to C<*ARGV> if no argument is provided. (Rafael
Garcia-Suarez)

=head2 state() variables

A new class of variables has been introduced. State variables are similar
to C<my> variables, but are declared with the C<state> keyword in place of
C<my>. They're visible only in their lexical scope, but their value is
persistent: unlike C<my> variables, they're not undefined at scope entry,
but retain their previous value. (Rafael Garcia-Suarez, Nicholas Clark)

To use state variables, one needs to enable them by using

use feature 'state';

or by using the C<-E> command-line switch in one-liners.
See L<perlsub/"Persistent Private Variables">.

=head2 Stacked filetest operators

As a new form of syntactic sugar, it's now possible to stack up filetest
operators. You can now write C<-f -w -x $file> in a row to mean
C<-x $file && -w _ && -f _>. See L<perlfunc/-X>.

=head2 UNIVERSAL::DOES()

The C<UNIVERSAL> class has a new method, C<DOES()>. It has been added to
solve semantic problems with the C<isa()> method. C<isa()> checks for
inheritance, while C<DOES()> has been designed to be overridden when
module authors use other types of relations between classes (in addition
to inheritance). (chromatic)

See L<< UNIVERSAL/"$obj->DOES( ROLE )" >>.

=head2 Formats

Formats were improved in several ways. A new field, C<^*>, can be used for
variable-width, one-line-at-a-time text. Null characters are now handled
correctly in picture lines. Using C<@#> and C<~~> together will now
produce a compile-time error, as those format fields are incompatible.
L<perlform> has been improved, and miscellaneous bugs fixed.

=head2 Byte-order modifiers for pack() and unpack()

There are two new byte-order modifiers, C<E<gt>> (big-endian) and C<E<lt>>
(little-endian), that can be appended to most pack() and unpack() template
characters and groups to force a certain byte-order for that type or group.
See L<perlfunc/pack> and L<perlpacktut> for details.

=head2 C<no VERSION>

You can now use C<no> followed by a version number to specify that you
want to use a version of perl older than the specified one.

=head2 C<chdir>, C<chmod> and C<chown> on filehandles

C<chdir>, C<chmod> and C<chown> can now work on filehandles as well as
filenames, if the system supports respectively C<fchdir>, C<fchmod> and
C<fchown>, thanks to a patch provided by Gisle Aas.

=head2 OS groups

C<$(> and C<$)> now return groups in the order where the OS returns them,
thanks to Gisle Aas. This wasn't previously the case.

=head2 Recursive sort subs

You can now use recursive subroutines with sort(), thanks to Robin Houston.

=head2 Exceptions in constant folding

The constant folding routine is now wrapped in an exception handler, and
if folding throws an exception (such as attempting to evaluate 0/0), perl
now retains the current optree, rather than aborting the whole program.
Without this change, programs would not compile if they had expressions that
happened to generate exceptions, even though those expressions were in code
that could never be reached at runtime. (Nicholas Clark, Dave Mitchell)

=head2 Source filters in @INC

It's possible to enhance the mechanism of subroutine hooks in @INC by
adding a source filter on top of the filehandle opened and returned by the
hook. This feature was planned a long time ago, but wasn't quite working
until now. See L<perlfunc/require> for details. (Nicholas Clark)

=head2 New internal variables

=over 4

=item C<${^RE_DEBUG_FLAGS}>

This variable controls what debug flags are in effect for the regular
expression engine when running under C<use re "debug">. See L<re> for
details.

=item C<${^CHILD_ERROR_NATIVE}>

This variable gives the native status returned by the last pipe close,
backtick command, successful call to wait() or waitpid(), or from the
system() operator. See L<perlvar> for details. (Contributed by Gisle Aas.)

=item C<${^RE_TRIE_MAXBUF}>

See L</"Trie optimisation of literal string alternations">.

=item C<${^WIN32_SLOPPY_STAT}>

See L</"Sloppy stat on Windows">.

=back

=head2 Miscellaneous

C<unpack()> now defaults to unpacking the C<$_> variable.

C<mkdir()> without arguments now defaults to C<$_>.

The internal dump output has been improved, so that non-printable characters
such as newline and backspace are output in C<\x> notation, rather than
octal.

The B<-C> option can no longer be used on the C<#!> line. It wasn't
working there anyway, since the standard streams are already set up
at this point in the execution of the perl interpreter. You can use
binmode() instead to get the desired behaviour.

=head2 UCD 5.0.0

The copy of the Unicode Character Database included in Perl 5 has
been updated to version 5.0.0.

=head2 MAD

MAD, which stands for I<Miscellaneous Attribute Decoration>, is a
still-in-development work leading to a Perl 5 to Perl 6 converter. To
enable it, it's necessary to pass the argument C<-Dmad> to Configure. The
obtained perl isn't binary compatible with a regular perl 5.10, and has
space and speed penalties; moreover not all regression tests still pass
with it. (Larry Wall, Nicholas Clark)

=head2 kill() on Windows

On Windows platforms, C<kill(-9, $pid)> now kills a process tree.
(On Unix, this delivers the signal to all processes in the same process
group.)

=head1 Incompatible Changes

=head2 Packing and UTF-8 strings

The semantics of pack() and unpack() regarding UTF-8-encoded data has been
changed. Processing is now by default character per character instead of
byte per byte on the underlying encoding. Notably, code that used things
like C<pack("a*", $string)> to see through the encoding of string will now
simply get back the original $string. Packed strings can also get upgraded
during processing when you store upgraded characters. You can get the old
behaviour by using C<use bytes>.

To be consistent with pack(), the C<C0> in unpack() templates indicates
that the data is to be processed in character mode, i.e. character by
character; on the contrary, C<U0> in unpack() indicates UTF-8 mode, where
the packed string is processed in its UTF-8-encoded Unicode form on a byte
by byte basis. This is reversed with regard to perl 5.8.X, but now consistent
between pack() and unpack().

Moreover, C<C0> and C<U0> can also be used in pack() templates to specify
respectively character and byte modes.

C<C0> and C<U0> in the middle of a pack or unpack format now switch to the
specified encoding mode, honoring parens grouping. Previously, parens were
ignored.

Also, there is a new pack() character format, C<W>, which is intended to
replace the old C<C>. C<C> is kept for unsigned chars coded as bytes in
the strings internal representation. C<W> represents unsigned (logical)
character values, which can be greater than 255. It is therefore more
robust when dealing with potentially UTF-8-encoded data (as C<C> will wrap
values outside the range 0..255, and not respect the string encoding).

In practice, that means that pack formats are now encoding-neutral, except
C<C>.

For consistency, C<A> in unpack() format now trims all Unicode whitespace
from the end of the string. Before perl 5.9.2, it used to strip only the
classical ASCII space characters.

=head2 Byte/character count feature in unpack()

A new unpack() template character, C<".">, returns the number of bytes or
characters (depending on the selected encoding mode, see above) read so far.

=head2 The C<$*> and C<$#> variables have been removed

C<$*>, which was deprecated in favor of the C</s> and C</m> regexp
modifiers, has been removed.

The deprecated C<$#> variable (output format for numbers) has been
removed.

Two new severe warnings, C<$#/$* is no longer supported>, have been added.

=head2 substr() lvalues are no longer fixed-length

The lvalues returned by the three argument form of substr() used to be a
"fixed length window" on the original string. In some cases this could
cause surprising action at distance or other undefined behaviour. Now the
length of the window adjusts itself to the length of the string assigned to
it.

=head2 Parsing of C<-f _>

The identifier C<_> is now forced to be a bareword after a filetest
operator. This solves a number of misparsing issues when a global C<_>
subroutine is defined.

=head2 C<:unique>

The C<:unique> attribute has been made a no-op, since its current
implementation was fundamentally flawed and not threadsafe.

=head2 Effect of pragmas in eval

The compile-time value of the C<%^H> hint variable can now propagate into
eval("")uated code. This makes it more useful to implement lexical
pragmas.

As a side-effect of this, the overloaded-ness of constants now propagates
into eval("").

=head2 chdir FOO

A bareword argument to chdir() is now recognized as a file handle.
Earlier releases interpreted the bareword as a directory name.
(Gisle Aas)

=head2 Handling of .pmc files

An old feature of perl was that before C<require> or C<use> look for a
file with a F<.pm> extension, they will first look for a similar filename
with a F<.pmc> extension. If this file is found, it will be loaded in
place of any potentially existing file ending in a F<.pm> extension.

Previously, F<.pmc> files were loaded only if more recent than the
matching F<.pm> file. Starting with 5.9.4, they'll be always loaded if
they exist.

=head2 $^V is now a C<version> object instead of a v-string

$^V can still be used with the C<%vd> format in printf, but any
character-level operations will now access the string representation
of the C<version> object and not the ordinals of a v-string.
Expressions like C<< substr($^V, 0, 2) >> or C<< split //, $^V >>
no longer work and must be rewritten.

=head2 @- and @+ in patterns

The special arrays C<@-> and C<@+> are no longer interpolated in regular
expressions. (Sadahiro Tomoyuki)

=head2 $AUTOLOAD can now be tainted

If you call a subroutine by a tainted name, and if it defers to an
AUTOLOAD function, then $AUTOLOAD will be (correctly) tainted.
(Rick Delaney)

=head2 Tainting and printf

When perl is run under taint mode, C<printf()> and C<sprintf()> will now
reject any tainted format argument. (Rafael Garcia-Suarez)

=head2 undef and signal handlers

Undefining or deleting a signal handler via C<undef $SIG{FOO}> is now
equivalent to setting it to C<'DEFAULT'>. (Rafael Garcia-Suarez)

=head2 strictures and dereferencing in defined()

C<use strict 'refs'> was ignoring taking a hard reference in an argument
to defined(), as in :

use strict 'refs';
    my $x = 'foo';
    if (defined $$x) {...}

This now correctly produces the run-time error C<Can't use string as a
SCALAR ref while "strict refs" in use>.

C<defined @$foo> and C<defined %$bar> are now also subject to C<strict
'refs'> (that is, C<$foo> and C<$bar> shall be proper references there.)
(C<defined(@foo)> and C<defined(%bar)> are discouraged constructs anyway.)
(Nicholas Clark)

=head2 C<(?p{})> has been removed

The regular expression construct C<(?p{})>, which was deprecated in perl
5.8, has been removed. Use C<(??{})> instead. (Rafael Garcia-Suarez)

=head2 Pseudo-hashes have been removed

Support for pseudo-hashes has been removed from Perl 5.9. (The C<fields>
pragma remains here, but uses an alternate implementation.)

=head2 Removal of the bytecode compiler and of perlcc

C<perlcc>, the byteloader and the supporting modules (B::C, B::CC,
B::Bytecode, etc.) are no longer distributed with the perl sources. Those
experimental tools have never worked reliably, and, due to the lack of
volunteers to keep them in line with the perl interpreter developments, it
was decided to remove them instead of shipping a broken version of those.
The last version of those modules can be found with perl 5.9.4.

However the B compiler framework stays supported in the perl core, as with
the more useful modules it has permitted (among others, B::Deparse and
B::Concise).

=head2 Removal of the JPL

The JPL (Java-Perl Lingo) has been removed from the perl sources tarball.

=head2 Recursive inheritance detected earlier

Perl will now immediately throw an exception if you modify any package's
C<@ISA> in such a way that it would cause recursive inheritance.

Previously, the exception would not occur until Perl attempted to make
use of the recursive inheritance while resolving a method or doing a
C<$foo-E<gt>isa($bar)> lookup.

=head2 warnings::enabled and warnings::warnif changed to favor users of modules

The behaviour in 5.10.x favors the person using the module;
The behaviour in 5.8.x favors the module writer;

Assume the following code:

main calls Foo::Bar::baz()
  Foo::Bar inherits from Foo::Base
  Foo::Bar::baz() calls Foo::Base::_bazbaz()
  Foo::Base::_bazbaz() calls: warnings::warnif('substr', 'some warning 
message');

On 5.8.x, the code warns when Foo::Bar contains C<use warnings;>
It does not matter if Foo::Base or main have warnings enabled
to disable the warning one has to modify Foo::Bar.

On 5.10.0 and newer, the code warns when main contains C<use warnings;>
It does not matter if Foo::Base or Foo::Bar have warnings enabled
to disable the warning one has to modify main.

=head1 Modules and Pragmata

=head2 Upgrading individual core modules

Even more core modules are now also available separately through the
CPAN. If you wish to update one of these modules, you don't need to
wait for a new perl release. From within the cpan shell, running the
'r' command will report on modules with upgrades available. See
C<perldoc CPAN> for more information.

=head2 Pragmata Changes

=over 4

=item C<feature>

The new pragma C<feature> is used to enable new features that might break
old code. See L</"The C<feature> pragma"> above.

=item C<mro>

This new pragma enables to change the algorithm used to resolve inherited
methods. See L</"New Pragma, C<mro>"> above.

=item Scoping of the C<sort> pragma

The C<sort> pragma is now lexically scoped. Its effect used to be global.

=item Scoping of C<bignum>, C<bigint>, C<bigrat>

The three numeric pragmas C<bignum>, C<bigint> and C<bigrat> are now
lexically scoped. (Tels)

=item C<base>

The C<base> pragma now warns if a class tries to inherit from itself.
(Curtis "Ovid" Poe)

=item C<strict> and C<warnings>

C<strict> and C<warnings> will now complain loudly if they are loaded via
incorrect casing (as in C<use Strict;>). (Johan Vromans)

=item C<version>

The C<version> module provides support for version objects.

=item C<warnings>

The C<warnings> pragma doesn't load C<Carp> anymore. That means that code
that used C<Carp> routines without having loaded it at compile time might
need to be adjusted; typically, the following (faulty) code won't work
anymore, and will require parentheses to be added after the function name:

use warnings;
    require Carp;
    Carp::confess 'argh';

=item C<less>

C<less> now does something useful (or at least it tries to). In fact, it
has been turned into a lexical pragma. So, in your modules, you can now
test whether your users have requested to use less CPU, or less memory,
less magic, or maybe even less fat. See L<less> for more. (Joshua ben
Jore)

=back

=head2 New modules

=over 4

=item *

C<encoding::warnings>, by Audrey Tang, is a module to emit warnings
whenever an ASCII character string containing high-bit bytes is implicitly
converted into UTF-8. It's a lexical pragma since Perl 5.9.4; on older
perls, its effect is global.

=item *

C<Module::CoreList>, by Richard Clamp, is a small handy module that tells
you what versions of core modules ship with any versions of Perl 5. It
comes with a command-line frontend, C<corelist>.

=item *

C<Math::BigInt::FastCalc> is an XS-enabled, and thus faster, version of
C<Math::BigInt::Calc>.

=item *

C<Compress::Zlib> is an interface to the zlib compression library. It
comes with a bundled version of zlib, so having a working zlib is not a
prerequisite to install it. It's used by C<Archive::Tar> (see below).

=item *

C<IO::Zlib> is an C<IO::>-style interface to C<Compress::Zlib>.

=item *

C<Archive::Tar> is a module to manipulate C<tar> archives.

=item *

C<Digest::SHA> is a module used to calculate many types of SHA digests,
has been included for SHA support in the CPAN module.

=item *

C<ExtUtils::CBuilder> and C<ExtUtils::ParseXS> have been added.

=item *

C<Hash::Util::FieldHash>, by Anno Siegel, has been added. This module
provides support for I<field hashes>: hashes that maintain an association
of a reference with a value, in a thread-safe garbage-collected way.
Such hashes are useful to implement inside-out objects.

=item *

C<Module::Build>, by Ken Williams, has been added. It's an alternative to
C<ExtUtils::MakeMaker> to build and install perl modules.

=item *

C<Module::Load>, by Jos Boumans, has been added. It provides a single
interface to load Perl modules and F<.pl> files.

=item *

C<Module::Loaded>, by Jos Boumans, has been added. It's used to mark
modules as loaded or unloaded.

=item *

C<Package::Constants>, by Jos Boumans, has been added. It's a simple
helper to list all constants declared in a given package.

=item *

C<Win32API::File>, by Tye McQueen, has been added (for Windows builds).
This module provides low-level access to Win32 system API calls for
files/dirs.

=item *

C<Locale::Maketext::Simple>, needed by CPANPLUS, is a simple wrapper around
C<Locale::Maketext::Lexicon>. Note that C<Locale::Maketext::Lexicon> isn't
included in the perl core; the behaviour of C<Locale::Maketext::Simple>
gracefully degrades when the later isn't present.

=item *

C<Params::Check> implements a generic input parsing/checking mechanism. It
is used by CPANPLUS.

=item *

C<Term::UI> simplifies the task to ask questions at a terminal prompt.

=item *

C<Object::Accessor> provides an interface to create per-object accessors.

=item *

C<Module::Pluggable> is a simple framework to create modules that accept
pluggable sub-modules.

=item *

C<Module::Load::Conditional> provides simple ways to query and possibly
load installed modules.

=item *

C<Time::Piece> provides an object oriented interface to time functions,
overriding the built-ins localtime() and gmtime().

=item *

C<IPC::Cmd> helps to find and run external commands, possibly
interactively.

=item *

C<File::Fetch> provide a simple generic file fetching mechanism.

=item *

C<Log::Message> and C<Log::Message::Simple> are used by the log facility
of C<CPANPLUS>.

=item *

C<Archive::Extract> is a generic archive extraction mechanism
for F<.tar> (plain, gzipped or bzipped) or F<.zip> files.

=item *

C<CPANPLUS> provides an API and a command-line tool to access the CPAN
mirrors.

=item *

C<Pod::Escapes> provides utilities that are useful in decoding Pod
EE<lt>...E<gt> sequences.

=item *

C<Pod::Simple> is now the backend for several of the Pod-related modules
included with Perl.

=back

=head2 Selected Changes to Core Modules

=over 4

=item C<Attribute::Handlers>

C<Attribute::Handlers> can now report the caller's file and line number.
(David Feldman)

All interpreted attributes are now passed as array references. (Damian
Conway)

=item C<B::Lint>

C<B::Lint> is now based on C<Module::Pluggable>, and so can be extended
with plugins. (Joshua ben Jore)

=item C

It's now possible to access the lexical pragma hints (C<%^H>) by using the
method B::COP::hints_hash(). It returns a C<B::RHE> object, which in turn
can be used to get a hash reference via the method B::RHE::HASH(). (Joshua
ben Jore)

=item C<Thread>

As the old 5005thread threading model has been removed, in favor of the
ithreads scheme, the C<Thread> module is now a compatibility wrapper, to
be used in old code only. It has been removed from the default list of
dynamic extensions.

=back

=head1 Utility Changes

=over 4

=item perl -d

The Perl debugger can now save all debugger commands for sourcing later;
notably, it can now emulate stepping backwards, by restarting and
rerunning all bar the last command from a saved command history.

It can also display the parent inheritance tree of a given class, with the
C command.

=item ptar

C<ptar> is a pure perl implementation of C<tar> that comes with
C<Archive::Tar>.

=item ptardiff

C<ptardiff> is a small utility used to generate a diff between the contents
of a tar archive and a directory tree. Like C<ptar>, it comes with
C<Archive::Tar>.

=item shasum

C<shasum> is a command-line utility, used to print or to check SHA
digests. It comes with the new C<Digest::SHA> module.

=item corelist

The C<corelist> utility is now installed with perl (see L</"New modules">
above).

=item h2ph and h2xs

C<h2ph> and C<h2xs> have been made more robust with regard to
"modern" C code.

C<h2xs> implements a new option C<--use-xsloader> to force use of
C<XSLoader> even in backwards compatible modules.

The handling of authors' names that had apostrophes has been fixed.

Any enums with negative values are now skipped.

=item perlivp

C<perlivp> no longer checks for F<*.ph> files by default. Use the new C<-a>
option to run I<all> tests.

=item find2perl

C<find2perl> now assumes C<-print> as a default action. Previously, it
needed to be specified explicitly.

Several bugs have been fixed in C<find2perl>, regarding C<-exec> and
C<-eval>. Also the options C<-path>, C<-ipath> and C<-iname> have been
added.

=item config_data

C<config_data> is a new utility that comes with C<Module::Build>. It
provides a command-line interface to the configuration of Perl modules
that use Module::Build's framework of configurability (that is,
C<*::ConfigData> modules that contain local configuration information for
their parent modules.)

=item cpanp

C<cpanp>, the CPANPLUS shell, has been added. (C<cpanp-run-perl>, a
helper for CPANPLUS operation, has been added too, but isn't intended for
direct use).

=item cpan2dist

C<cpan2dist> is a new utility that comes with CPANPLUS. It's a tool to
create distributions (or packages) from CPAN modules.

=item pod2html

The output of C<pod2html> has been enhanced to be more customizable via
CSS. Some formatting problems were also corrected. (Jari Aalto)

=back

=head1 New Documentation

The L<perlpragma> manpage documents how to write one's own lexical
pragmas in pure Perl (something that is possible starting with 5.9.4).

The new L<perlglossary> manpage is a glossary of terms used in the Perl
documentation, technical and otherwise, kindly provided by O'Reilly Media,
Inc.

The L<perlreguts> manpage, courtesy of Yves Orton, describes internals of the
Perl regular expression engine.

The L<perlreapi> manpage describes the interface to the perl interpreter
used to write pluggable regular expression engines (by Ævar Arnfjörð
Bjarmason).

The L<perlunitut> manpage is an tutorial for programming with Unicode and
string encodings in Perl, courtesy of Juerd Waalboer.

A new manual page, L<perlunifaq> (the Perl Unicode FAQ), has been added
(Juerd Waalboer).

The L<perlcommunity> manpage gives a description of the Perl community
on the Internet and in real life. (Edgar "Trizor" Bering)

The L<CORE> manual page documents the C<CORE::> namespace. (Tels)

The long-existing feature of C</(?{...})/> regexps setting C<$_> and pos()
is now documented.

=head1 Performance Enhancements

=head2 In-place sorting

Sorting arrays in place (C<@a = sort @a>) is now optimized to avoid
making a temporary copy of the array.

Likewise, C<reverse sort ...> is now optimized to sort in reverse,
avoiding the generation of a temporary intermediate list.

=head2 Lexical array access

Access to elements of lexical arrays via a numeric constant between 0 and
255 is now faster. (This used to be only the case for global arrays.)

=head2 XS-assisted SWASHGET

Some pure-perl code that perl was using to retrieve Unicode properties and
transliteration mappings has been reimplemented in XS.

=head2 Constant subroutines

The interpreter internals now support a far more memory efficient form of
inlineable constants. Storing a reference to a constant value in a symbol
table is equivalent to a full typeglob referencing a constant subroutine,
but using about 400 bytes less memory. This proxy constant subroutine is
automatically upgraded to a real typeglob with subroutine if necessary.
The approach taken is analogous to the existing space optimisation for
subroutine stub declarations, which are stored as plain scalars in place
of the full typeglob.

Several of the core modules have been converted to use this feature for
their system dependent constants - as a result C<use POSIX;> now takes about
200K less memory.

=head2 C<PERL_DONT_CREATE_GVSV>

The new compilation flag C<PERL_DONT_CREATE_GVSV>, introduced as an option
in perl 5.8.8, is turned on by default in perl 5.9.3. It prevents perl
from creating an empty scalar with every new typeglob. See L<perl589delta>
for details.

=head2 Weak references are cheaper

Weak reference creation is now I<O(1)> rather than I<O(n)>, courtesy of
Nicholas Clark. Weak reference deletion remains I<O(n)>, but if deletion only
happens at program exit, it may be skipped completely.

=head2 sort() enhancements

Salvador Fandiño provided improvements to reduce the memory usage of C<sort>
and to speed up some cases.

=head2 Memory optimisations

Several internal data structures (typeglobs, GVs, CVs, formats) have been
restructured to use less memory. (Nicholas Clark)

=head2 UTF-8 cache optimisation

The UTF-8 caching code is now more efficient, and used more often.
(Nicholas Clark)

=head2 Sloppy stat on Windows

On Windows, perl's stat() function normally opens the file to determine
the link count and update attributes that may have been changed through
hard links. Setting ${^WIN32_SLOPPY_STAT} to a true value speeds up
stat() by not performing this operation. (Jan Dubois)

=head2 Regular expressions optimisations

=over 4

=item Engine de-recursivised

The regular expression engine is no longer recursive, meaning that
patterns that used to overflow the stack will either die with useful
explanations, or run to completion, which, since they were able to blow
the stack before, will likely take a very long time to happen. If you were
experiencing the occasional stack overflow (or segfault) and upgrade to
discover that now perl apparently hangs instead, look for a degenerate
regex. (Dave Mitchell)

=item Single char char-classes treated as literals

Classes of a single character are now treated the same as if the character
had been used as a literal, meaning that code that uses char-classes as an
escaping mechanism will see a speedup. (Yves Orton)

=item Trie optimisation of literal string alternations

Alternations, where possible, are optimised into more efficient matching
structures. String literal alternations are merged into a trie and are
matched simultaneously.  This means that instead of O(N) time for matching
N alternations at a given point, the new code performs in O(1) time.
A new special variable, ${^RE_TRIE_MAXBUF}, has been added to fine-tune
this optimization. (Yves Orton)

B<Note:> Much code exists that works around perl's historic poor
performance on alternations. Often the tricks used to do so will disable
the new optimisations. Hopefully the utility modules used for this purpose
will be educated about these new optimisations.

=item Aho-Corasick start-point optimisation

When a pattern starts with a trie-able alternation and there aren't
better optimisations available, the regex engine will use Aho-Corasick
matching to find the start point. (Yves Orton)

=back

=head1 Installation and Configuration Improvements

=head2 Configuration improvements

=over 4

=item C<-Dusesitecustomize>

Run-time customization of @INC can be enabled by passing the
C<-Dusesitecustomize> flag to Configure. When enabled, this will make perl
run F<$sitelibexp/sitecustomize.pl> before anything else. This script can
then be set up to add additional entries to @INC.

=item Relocatable installations

There is now Configure support for creating a relocatable perl tree. If
you Configure with C<-Duserelocatableinc>, then the paths in @INC (and
everything else in %Config) can be optionally located via the path of the
perl executable.

That means that, if the string C<".../"> is found at the start of any
path, it's substituted with the directory of $^X. So, the relocation can
be configured on a per-directory basis, although the default with
C<-Duserelocatableinc> is that everything is relocated. The initial
install is done to the original configured prefix.

=item strlcat() and strlcpy()

The configuration process now detects whether strlcat() and strlcpy() are
available.  When they are not available, perl's own version is used (from
Russ Allbery's public domain implementation).  Various places in the perl
interpreter now use them. (Steve Peters)

=item C<d_pseudofork> and C<d_printf_format_null>

A new configuration variable, available as C<$Config{d_pseudofork}> in
the L<Config> module, has been added, to distinguish real fork() support
from fake pseudofork used on Windows platforms.

A new configuration variable, C<d_printf_format_null>, has been added, 
to see if printf-like formats are allowed to be NULL.

=item Configure help

C<Configure -h> has been extended with the most commonly used options.

=back

=head2 Compilation improvements

=over 4

=item Parallel build

Parallel makes should work properly now, although there may still be problems
if C<make test> is instructed to run in parallel.

=item Borland's compilers support

Building with Borland's compilers on Win32 should work more smoothly. In
particular Steve Hay has worked to side step many warnings emitted by their
compilers and at least one C compiler internal error.

=item Static build on Windows

Perl extensions on Windows now can be statically built into the Perl DLL.

Also, it's now possible to build a C<perl-static.exe> that doesn't depend
on the Perl DLL on Win32. See the Win32 makefiles for details.
(Vadim Konovalov)

=item ppport.h files

All F<ppport.h> files in the XS modules bundled with perl are now
autogenerated at build time. (Marcus Holland-Moritz)

=item C++ compatibility

Efforts have been made to make perl and the core XS modules compilable
with various C++ compilers (although the situation is not perfect with
some of the compilers on some of the platforms tested.)

=item Support for Microsoft 64-bit compiler

Support for building perl with Microsoft's 64-bit compiler has been
improved. (ActiveState)

=item Visual C++

Perl can now be compiled with Microsoft Visual C++ 2005 (and 2008 Beta 2).

=item Win32 builds

All win32 builds (MS-Win, WinCE) have been merged and cleaned up.

=back

=head2 Installation improvements

=over 4

=item Module auxiliary files

README files and changelogs for CPAN modules bundled with perl are no
longer installed.

=back

=head2 New Or Improved Platforms

Perl has been reported to work on Symbian OS. See L<perlsymbian> for more
information.

Many improvements have been made towards making Perl work correctly on
z/OS.

Perl has been reported to work on DragonFlyBSD and MidnightBSD.

Perl has also been reported to work on NexentaOS
( http://www.gnusolaris.org/ ).

The VMS port has been improved. See L<perlvms>.

Support for Cray XT4 Catamount/Qk has been added. See
F<hints/catamount.sh> in the source code distribution for more
information.

Vendor patches have been merged for RedHat and Gentoo.

DynaLoader::dl_unload_file() now works on Windows.

=head1 Selected Bug Fixes

=over 4

=item strictures in regexp-eval blocks

C<strict> wasn't in effect in regexp-eval blocks (C</(?{...})/>).

=item Calling CORE::require()

CORE::require() and CORE::do() were always parsed as require() and do()
when they were overridden. This is now fixed.

=item Subscripts of slices

You can now use a non-arrowed form for chained subscripts after a list
slice, like in:

({foo => "bar"})[0]{foo}

This used to be a syntax error; a C<< -> >> was required.

=item C<no warnings 'category'> works correctly with -w

Previously when running with warnings enabled globally via C<-w>, selective
disabling of specific warning categories would actually turn off all warnings.
This is now fixed; now C<no warnings 'io';> will only turn off warnings in the
C<io> class. Previously it would erroneously turn off all warnings.

=item threads improvements

Several memory leaks in ithreads were closed. Also, ithreads were made
less memory-intensive.

C<threads> is now a dual-life module, also available on CPAN. It has been
expanded in many ways. A kill() method is available for thread signalling.
One can get thread status, or the list of running or joinable threads.

A new C<< threads->exit() >> method is used to exit from the application
(this is the default for the main thread) or from the current thread only
(this is the default for all other threads). On the other hand, the exit()
built-in now always causes the whole application to terminate. (Jerry
D. Hedden)

=item chr() and negative values

chr() on a negative value now gives C<\x{FFFD}>, the Unicode replacement
character, unless when the C<bytes> pragma is in effect, where the low
eight bits of the value are used.

=item PERL5SHELL and tainting

On Windows, the PERL5SHELL environment variable is now checked for
taintedness. (Rafael Garcia-Suarez)

=item Using *FILE{IO}

C<stat()> and C<-X> filetests now treat *FILE{IO} filehandles like *FILE
filehandles. (Steve Peters)

=item Overloading and reblessing

Overloading now works when references are reblessed into another class.
Internally, this has been implemented by moving the flag for "overloading"
from the reference to the referent, which logically is where it should
always have been. (Nicholas Clark)

=item Overloading and UTF-8

A few bugs related to UTF-8 handling with objects that have
stringification overloaded have been fixed. (Nicholas Clark)

=item eval memory leaks fixed

Traditionally, C<eval 'syntax error'> has leaked badly. Many (but not all)
of these leaks have now been eliminated or reduced. (Dave Mitchell)

=item Random device on Windows

In previous versions, perl would read the file F</dev/urandom> if it
existed when seeding its random number generator. That file is unlikely
to exist on Windows, and if it did would probably not contain appropriate
data, so perl no longer tries to read it on Windows. (Alex Davies)

=item PERLIO_DEBUG

The C<PERLIO_DEBUG> environment variable no longer has any effect for
setuid scripts and for scripts run with B<-T>.

Moreover, with a thread-enabled perl, using C<PERLIO_DEBUG> could lead to
an internal buffer overflow. This has been fixed.

=item PerlIO::scalar and read-only scalars

PerlIO::scalar will now prevent writing to read-only scalars. Moreover,
seek() is now supported with PerlIO::scalar-based filehandles, the
underlying string being zero-filled as needed. (Rafael, Jarkko Hietaniemi)

=item study() and UTF-8

study() never worked for UTF-8 strings, but could lead to false results.
It's now a no-op on UTF-8 data. (Yves Orton)

=item Critical signals

The signals SIGILL, SIGBUS and SIGSEGV are now always delivered in an
"unsafe" manner (contrary to other signals, that are deferred until the
perl interpreter reaches a reasonably stable state; see
L<perlipc/"Deferred Signals (Safe Signals)">). (Rafael)

=item @INC-hook fix

When a module or a file is loaded through an @INC-hook, and when this hook
has set a filename entry in %INC, __FILE__ is now set for this module
accordingly to the contents of that %INC entry. (Rafael)

=item C<-t> switch fix

The C<-w> and C<-t> switches can now be used together without messing
up which categories of warnings are activated. (Rafael)

=item Duping UTF-8 filehandles

Duping a filehandle which has the C<:utf8> PerlIO layer set will now
properly carry that layer on the duped filehandle. (Rafael)

=item Localisation of hash elements

Localizing a hash element whose key was given as a variable didn't work
correctly if the variable was changed while the local() was in effect (as
in C<local $h{$x}; ++$x>). (Bo Lindbergh)

=back

=head1 New or Changed Diagnostics

=over 4

=item Use of uninitialized value

Perl will now try to tell you the name of the variable (if any) that was
undefined.

=item Deprecated use of my() in false conditional

A new deprecation warning, I<Deprecated use of my() in false conditional>,
has been added, to warn against the use of the dubious and deprecated
construct

my $x if 0;

See L<perldiag>. Use C<state> variables instead.

=item !=~ should be !~

A new warning, C<!=~ should be !~>, is emitted to prevent this misspelling
of the non-matching operator.

=item Newline in left-justified string

The warning I<Newline in left-justified string> has been removed.

=item Too late for "-T" option

The error I<Too late for "-T" option> has been reformulated to be more
descriptive.

=item "%s" variable %s masks earlier declaration

This warning is now emitted in more consistent cases; in short, when one
of the declarations involved is a C<my> variable:

my $x;   my $x;	# warns
    my $x;  our $x;	# warns
    our $x;  my $x;	# warns

On the other hand, the following:

our $x; our $x;

now gives a C<"our" variable %s redeclared> warning.

=item readdir()/closedir()/etc. attempted on invalid dirhandle

These new warnings are now emitted when a dirhandle is used but is
either closed or not really a dirhandle.

=item Opening dirhandle/filehandle %s also as a file/directory

Two deprecation warnings have been added: (Rafael)

Opening dirhandle %s also as a file
    Opening filehandle %s also as a directory

=item Use of -P is deprecated

Perl's command-line switch C<-P> is now deprecated.

=item v-string in use/require is non-portable

Perl will warn you against potential backwards compatibility problems with
the C<use VERSION> syntax.

=item perl -V

C<perl -V> has several improvements, making it more useable from shell
scripts to get the value of configuration variables. See L<perlrun> for
details.

=back

=head1 Changed Internals

In general, the source code of perl has been refactored, tidied up,
and optimized in many places. Also, memory management and allocation
has been improved in several points.

When compiling the perl core with gcc, as many gcc warning flags are
turned on as is possible on the platform.  (This quest for cleanliness
doesn't extend to XS code because we cannot guarantee the tidiness of
code we didn't write.)  Similar strictness flags have been added or
tightened for various other C compilers.

=head2 Reordering of SVt_* constants

The relative ordering of constants that define the various types of C<SV>
have changed; in particular, C<SVt_PVGV> has been moved before C<SVt_PVLV>,
C<SVt_PVAV>, C<SVt_PVHV> and C<SVt_PVCV>. This is unlikely to make any
difference unless you have code that explicitly makes assumptions about that
ordering. (The inheritance hierarchy of C<B::*> objects has been changed
to reflect this.)

=head2 Elimination of SVt_PVBM

Related to this, the internal type C<SVt_PVBM> has been removed. This
dedicated type of C<SV> was used by the C<index> operator and parts of the
regexp engine to facilitate fast Boyer-Moore matches. Its use internally has
been replaced by C<SV>s of type C<SVt_PVGV>.

=head2 New type SVt_BIND

A new type C<SVt_BIND> has been added, in readiness for the project to
implement Perl 6 on 5. There deliberately is no implementation yet, and
they cannot yet be created or destroyed.

=head2 Removal of CPP symbols

The C preprocessor symbols C<PERL_PM_APIVERSION> and
C<PERL_XS_APIVERSION>, which were supposed to give the version number of
the oldest perl binary-compatible (resp. source-compatible) with the
present one, were not used, and sometimes had misleading values. They have
been removed.

=head2 Less space is used by ops

The C<BASEOP> structure now uses less space. The C<op_seq> field has been
removed and replaced by a single bit bit-field C<op_opt>. C<op_type> is now 9
bits long. (Consequently, the C<B::OP> class doesn't provide an C<seq>
method anymore.)

=head2 New parser

perl's parser is now generated by bison (it used to be generated by
byacc.) As a result, it seems to be a bit more robust.

Also, Dave Mitchell improved the lexer debugging output under C<-DT>.

=head2 Use of C<const>

Andy Lester supplied many improvements to determine which function
parameters and local variables could actually be declared C<const> to the C
compiler. Steve Peters provided new C<*_set> macros and reworked the core to
use these rather than assigning to macros in LVALUE context.

=head2 Mathoms

A new file, F<mathoms.c>, has been added. It contains functions that are
no longer used in the perl core, but that remain available for binary or
source compatibility reasons. However, those functions will not be
compiled in if you add C<-DNO_MATHOMS> in the compiler flags.

=head2 C<AvFLAGS> has been removed

The C<AvFLAGS> macro has been removed.

=head2 C<av_*> changes

The C<av_*()> functions, used to manipulate arrays, no longer accept null
C<AV*> parameters.

=head2 $^H and %^H

The implementation of the special variables $^H and %^H has changed, to
allow implementing lexical pragmas in pure Perl.

=head2 B:: modules inheritance changed

The inheritance hierarchy of C<B::> modules has changed; C<B::NV> now
inherits from C<B::SV> (it used to inherit from C<B::IV>).

=head2 Anonymous hash and array constructors

The anonymous hash and array constructors now take 1 op in the optree
instead of 3, now that pp_anonhash and pp_anonlist return a reference to
an hash/array when the op is flagged with OPf_SPECIAL. (Nicholas Clark)

=head1 Known Problems

There's still a remaining problem in the implementation of the lexical
C<$_>: it doesn't work inside C</(?{...})/> blocks. (See the TODO test in
F<t/op/mydef.t>.)

Stacked filetest operators won't work when the C<filetest> pragma is in
effect, because they rely on the stat() buffer C<_> being populated, and
filetest bypasses stat().

=head2 UTF-8 problems

The handling of Unicode still is unclean in several places, where it's
dependent on whether a string is internally flagged as UTF-8. This will
be made more consistent in perl 5.12, but that won't be possible without
a certain amount of backwards incompatibility.

=head1 Platform Specific Problems

When compiled with g++ and thread support on Linux, it's reported that the
C<$!> stops working correctly. This is related to the fact that the glibc
provides two strerror_r(3) implementation, and perl selects the wrong
one.

=head1 Reporting Bugs

If you find what you think is a bug, you might check the articles
recently posted to the comp.lang.perl.misc newsgroup and the perl
bug database at http://rt.perl.org/rt3/ .  There may also be
information at http://www.perl.org/ , the Perl Home Page.

If you believe you have an unreported bug, please run the B<perlbug>
program included with your release. Be sure to trim your bug down
to a tiny but sufficient test case. Your bug report, along with the
output of C<perl -V>, will be sent off to perlbug@perl.org to be
analysed by the Perl porting team.

=head1 SEE ALSO

The F<Changes> file and the perl590delta to perl595delta man pages for
exhaustive details on what changed.

The F<INSTALL> file for how to build Perl.

The F<README> file for general stuff.

The F<Artistic> and F<Copying> files for copyright information.

=cut

cmd: