FM / python3.6

/usr/lib64/python3.6

Name	Size	Mode	Actions
asyncio/	-	0755	rm
collections/	-	0755	rm
concurrent/	-	0755	rm
config-3.6m-x86_64-linux-gnu/	-	0755	rm
ctypes/	-	0755	rm
curses/	-	0755	rm
dbm/	-	0755	rm
distutils/	-	0755	rm
email/	-	0755	rm
encodings/	-	0755	rm
ensurepip/	-	0755	rm
html/	-	0755	rm
http/	-	0755	rm
importlib/	-	0755	rm
json/	-	0755	rm
lib-dynload/	-	0755	rm
lib2to3/	-	0755	rm
logging/	-	0755	rm
multiprocessing/	-	0755	rm
pydoc_data/	-	0755	rm
site-packages/	-	0755	rm
sqlite3/	-	0755	rm
test/	-	0755	rm
unittest/	-	0755	rm
urllib/	-	0755	rm
venv/	-	0755	rm
wsgiref/	-	0755	rm
xml/	-	0755	rm
xmlrpc/	-	0755	rm
__pycache__/	-	0755	rm
abc.py	8727	0644	edit dl rm
aifc.py	32454	0644	edit dl rm
antigravity.py	477	0644	edit dl rm
argparse.py	90372	0644	edit dl rm
ast.py	12166	0644	edit dl rm
asynchat.py	11328	0644	edit dl rm
asyncore.py	20159	0644	edit dl rm
base64.py	20388	0755	edit dl rm
bdb.py	23556	0644	edit dl rm
binhex.py	13954	0644	edit dl rm
bisect.py	2595	0644	edit dl rm
bz2.py	12478	0644	edit dl rm
calendar.py	23213	0644	edit dl rm
cgi.py	37219	0755	edit dl rm
cgitb.py	12018	0644	edit dl rm
chunk.py	5425	0644	edit dl rm
cmd.py	14860	0644	edit dl rm
code.py	10614	0644	edit dl rm
codecs.py	36276	0644	edit dl rm
codeop.py	5994	0644	edit dl rm
colorsys.py	4064	0644	edit dl rm
compileall.py	12125	0644	edit dl rm
configparser.py	53592	0644	edit dl rm
contextlib.py	13162	0644	edit dl rm
copy.py	8815	0644	edit dl rm
copyreg.py	7007	0644	edit dl rm
cProfile.py	5380	0755	edit dl rm
crypt.py	1864	0644	edit dl rm
csv.py	16180	0644	edit dl rm
datetime.py	82034	0644	edit dl rm
decimal.py	320	0644	edit dl rm
difflib.py	84377	0644	edit dl rm
dis.py	18132	0644	edit dl rm
doctest.py	104391	0644	edit dl rm
dummy_threading.py	2815	0644	edit dl rm
enum.py	33606	0644	edit dl rm
filecmp.py	9830	0644	edit dl rm
fileinput.py	14471	0644	edit dl rm
fnmatch.py	3166	0644	edit dl rm
formatter.py	15143	0644	edit dl rm
fractions.py	23639	0644	edit dl rm
ftplib.py	35617	0644	edit dl rm
functools.py	31346	0644	edit dl rm
genericpath.py	5028	0644	edit dl rm
getopt.py	7489	0644	edit dl rm
getpass.py	5994	0644	edit dl rm
gettext.py	21530	0644	edit dl rm
glob.py	5638	0644	edit dl rm
gzip.py	20334	0644	edit dl rm
hashlib.py	8799	0644	edit dl rm
heapq.py	22929	0644	edit dl rm
hmac.py	6381	0644	edit dl rm
imaplib.py	53464	0644	edit dl rm
imghdr.py	3795	0644	edit dl rm
imp.py	10669	0644	edit dl rm
inspect.py	116958	0644	edit dl rm
io.py	3517	0644	edit dl rm
ipaddress.py	77818	0644	edit dl rm
keyword.py	2219	0755	edit dl rm
linecache.py	5312	0644	edit dl rm
locale.py	77300	0644	edit dl rm
lzma.py	12983	0644	edit dl rm
macpath.py	5971	0644	edit dl rm
macurl2path.py	2732	0644	edit dl rm
mailbox.py	78624	0644	edit dl rm
mailcap.py	9067	0644	edit dl rm
mimetypes.py	21042	0644	edit dl rm
modulefinder.py	23027	0644	edit dl rm
netrc.py	5684	0644	edit dl rm
nntplib.py	43078	0644	edit dl rm
ntpath.py	23094	0644	edit dl rm
nturl2path.py	2444	0644	edit dl rm
numbers.py	10243	0644	edit dl rm
opcode.py	5822	0644	edit dl rm
operator.py	10863	0644	edit dl rm
optparse.py	60371	0644	edit dl rm
os.py	37526	0644	edit dl rm
pathlib.py	46238	0644	edit dl rm
pdb.py	61320	0755	edit dl rm
pickle.py	55691	0644	edit dl rm
pickletools.py	91775	0644	edit dl rm
pipes.py	8916	0644	edit dl rm
pkgutil.py	21315	0644	edit dl rm
platform.py	47214	0755	edit dl rm
plistlib.py	32291	0644	edit dl rm
poplib.py	15087	0644	edit dl rm
posixpath.py	16324	0644	edit dl rm
pprint.py	20860	0644	edit dl rm
profile.py	22029	0755	edit dl rm
pstats.py	26564	0644	edit dl rm
pty.py	4763	0644	edit dl rm
pyclbr.py	13558	0644	edit dl rm
pydoc.py	103501	0644	edit dl rm
py_compile.py	7181	0644	edit dl rm
queue.py	8780	0644	edit dl rm
quopri.py	7262	0755	edit dl rm
random.py	27442	0644	edit dl rm
re.py	15552	0644	edit dl rm
reprlib.py	5336	0644	edit dl rm
rlcompleter.py	7097	0644	edit dl rm
runpy.py	11959	0644	edit dl rm
sched.py	6511	0644	edit dl rm
secrets.py	2038	0644	edit dl rm
selectors.py	19438	0644	edit dl rm
shelve.py	8515	0644	edit dl rm
shlex.py	12956	0644	edit dl rm
shutil.py	40829	0644	edit dl rm
signal.py	2123	0644	edit dl rm
site.py	21268	0644	edit dl rm
smtpd.py	34719	0755	edit dl rm
smtplib.py	44218	0755	edit dl rm
sndhdr.py	7088	0644	edit dl rm
socket.py	27443	0644	edit dl rm
socketserver.py	27010	0644	edit dl rm
sre_compile.py	19338	0644	edit dl rm
sre_constants.py	6821	0644	edit dl rm
sre_parse.py	36536	0644	edit dl rm
ssl.py	44509	0644	edit dl rm
stat.py	5038	0644	edit dl rm
statistics.py	20673	0644	edit dl rm
string.py	11795	0644	edit dl rm
stringprep.py	12917	0644	edit dl rm
struct.py	257	0644	edit dl rm
subprocess.py	62339	0644	edit dl rm
sunau.py	18095	0644	edit dl rm
symbol.py	2119	0755	edit dl rm
symtable.py	7277	0644	edit dl rm
sysconfig.py	24876	0644	edit dl rm
tabnanny.py	11411	0755	edit dl rm
tarfile.py	111635	0755	edit dl rm
telnetlib.py	23136	0644	edit dl rm
tempfile.py	28066	0644	edit dl rm
textwrap.py	19558	0644	edit dl rm
this.py	1003	0644	edit dl rm
threading.py	50136	0644	edit dl rm
timeit.py	13342	0755	edit dl rm
token.py	3075	0644	edit dl rm
tokenize.py	29496	0644	edit dl rm
trace.py	28733	0755	edit dl rm
traceback.py	23458	0644	edit dl rm
tracemalloc.py	16658	0644	edit dl rm
tty.py	879	0644	edit dl rm
types.py	8870	0644	edit dl rm
typing.py	80274	0644	edit dl rm
uu.py	6763	0755	edit dl rm
uuid.py	24020	0644	edit dl rm
warnings.py	18488	0644	edit dl rm
wave.py	17709	0644	edit dl rm
weakref.py	20466	0644	edit dl rm
webbrowser.py	21767	0755	edit dl rm
xdrlib.py	5913	0644	edit dl rm
zipapp.py	7157	0644	edit dl rm
zipfile.py	79924	0644	edit dl rm
_bootlocale.py	1301	0644	edit dl rm
_collections_abc.py	26392	0644	edit dl rm
_compat_pickle.py	8749	0644	edit dl rm
_compression.py	5340	0644	edit dl rm
_dummy_thread.py	5118	0644	edit dl rm
_markupbase.py	14598	0644	edit dl rm
_osx_support.py	19138	0644	edit dl rm
_pydecimal.py	230228	0644	edit dl rm
_pyio.py	88097	0644	edit dl rm
_sitebuiltins.py	3115	0644	edit dl rm
_strptime.py	24747	0644	edit dl rm
_sysconfigdata_dm_linux_x86_64-linux-gnu.py	30191	0644	edit dl rm
_sysconfigdata_m_linux_x86_64-linux-gnu.py	30367	0644	edit dl rm
_threading_local.py	7214	0644	edit dl rm
_weakrefset.py	5705	0644	edit dl rm
__future__.py	4841	0644	edit dl rm
__phello__.foo.py	64	0644	edit dl rm

Edit: /usr/lib64/python3.6/lzma.py (12983B)

"""Interface to the liblzma compression library.

This module provides a class for reading and writing compressed files,
classes for incremental (de)compression, and convenience functions for
one-shot (de)compression.

These classes and functions support both the XZ and legacy LZMA
container formats, as well as raw compressed data streams.
"""

__all__ = [
    "CHECK_NONE", "CHECK_CRC32", "CHECK_CRC64", "CHECK_SHA256",
    "CHECK_ID_MAX", "CHECK_UNKNOWN",
    "FILTER_LZMA1", "FILTER_LZMA2", "FILTER_DELTA", "FILTER_X86", "FILTER_IA64",
    "FILTER_ARM", "FILTER_ARMTHUMB", "FILTER_POWERPC", "FILTER_SPARC",
    "FORMAT_AUTO", "FORMAT_XZ", "FORMAT_ALONE", "FORMAT_RAW",
    "MF_HC3", "MF_HC4", "MF_BT2", "MF_BT3", "MF_BT4",
    "MODE_FAST", "MODE_NORMAL", "PRESET_DEFAULT", "PRESET_EXTREME",

"LZMACompressor", "LZMADecompressor", "LZMAFile", "LZMAError",
    "open", "compress", "decompress", "is_check_supported",
]

import builtins
import io
import os
from _lzma import *
from _lzma import _encode_filter_properties, _decode_filter_properties
import _compression

_MODE_CLOSED   = 0
_MODE_READ     = 1
# Value 2 no longer used
_MODE_WRITE    = 3

class LZMAFile(_compression.BaseStream):

"""A file object providing transparent LZMA (de)compression.

An LZMAFile can act as a wrapper for an existing file object, or
    refer directly to a named file on disk.

Note that LZMAFile provides a *binary* file interface - data read
    is returned as bytes, and data to be written must be given as bytes.
    """

def __init__(self, filename=None, mode="r", *,
                 format=None, check=-1, preset=None, filters=None):
        """Open an LZMA-compressed file in binary mode.

filename can be either an actual file name (given as a str,
        bytes, or PathLike object), in which case the named file is
        opened, or it can be an existing file object to read from or
        write to.

mode can be "r" for reading (default), "w" for (over)writing,
        "x" for creating exclusively, or "a" for appending. These can
        equivalently be given as "rb", "wb", "xb" and "ab" respectively.

format specifies the container format to use for the file.
        If mode is "r", this defaults to FORMAT_AUTO. Otherwise, the
        default is FORMAT_XZ.

check specifies the integrity check to use. This argument can
        only be used when opening a file for writing. For FORMAT_XZ,
        the default is CHECK_CRC64. FORMAT_ALONE and FORMAT_RAW do not
        support integrity checks - for these formats, check must be
        omitted, or be CHECK_NONE.

When opening a file for reading, the *preset* argument is not
        meaningful, and should be omitted. The *filters* argument should
        also be omitted, except when format is FORMAT_RAW (in which case
        it is required).

When opening a file for writing, the settings used by the
        compressor can be specified either as a preset compression
        level (with the *preset* argument), or in detail as a custom
        filter chain (with the *filters* argument). For FORMAT_XZ and
        FORMAT_ALONE, the default is to use the PRESET_DEFAULT preset
        level. For FORMAT_RAW, the caller must always specify a filter
        chain; the raw compressor does not support preset compression
        levels.

preset (if provided) should be an integer in the range 0-9,
        optionally OR-ed with the constant PRESET_EXTREME.

filters (if provided) should be a sequence of dicts. Each dict
        should have an entry for "id" indicating ID of the filter, plus
        additional entries for options to the filter.
        """
        self._fp = None
        self._closefp = False
        self._mode = _MODE_CLOSED

if mode in ("r", "rb"):
            if check != -1:
                raise ValueError("Cannot specify an integrity check "
                                 "when opening a file for reading")
            if preset is not None:
                raise ValueError("Cannot specify a preset compression "
                                 "level when opening a file for reading")
            if format is None:
                format = FORMAT_AUTO
            mode_code = _MODE_READ
        elif mode in ("w", "wb", "a", "ab", "x", "xb"):
            if format is None:
                format = FORMAT_XZ
            mode_code = _MODE_WRITE
            self._compressor = LZMACompressor(format=format, check=check,
                                              preset=preset, filters=filters)
            self._pos = 0
        else:
            raise ValueError("Invalid mode: {!r}".format(mode))

if isinstance(filename, (str, bytes, os.PathLike)):
            if "b" not in mode:
                mode += "b"
            self._fp = builtins.open(filename, mode)
            self._closefp = True
            self._mode = mode_code
        elif hasattr(filename, "read") or hasattr(filename, "write"):
            self._fp = filename
            self._mode = mode_code
        else:
            raise TypeError("filename must be a str, bytes, file or PathLike object")

if self._mode == _MODE_READ:
            raw = _compression.DecompressReader(self._fp, LZMADecompressor,
                trailing_error=LZMAError, format=format, filters=filters)
            self._buffer = io.BufferedReader(raw)

def close(self):
        """Flush and close the file.

May be called more than once without error. Once the file is
        closed, any other operation on it will raise a ValueError.
        """
        if self._mode == _MODE_CLOSED:
            return
        try:
            if self._mode == _MODE_READ:
                self._buffer.close()
                self._buffer = None
            elif self._mode == _MODE_WRITE:
                self._fp.write(self._compressor.flush())
                self._compressor = None
        finally:
            try:
                if self._closefp:
                    self._fp.close()
            finally:
                self._fp = None
                self._closefp = False
                self._mode = _MODE_CLOSED

@property
    def closed(self):
        """True if this file is closed."""
        return self._mode == _MODE_CLOSED

def fileno(self):
        """Return the file descriptor for the underlying file."""
        self._check_not_closed()
        return self._fp.fileno()

def seekable(self):
        """Return whether the file supports seeking."""
        return self.readable() and self._buffer.seekable()

def readable(self):
        """Return whether the file was opened for reading."""
        self._check_not_closed()
        return self._mode == _MODE_READ

def writable(self):
        """Return whether the file was opened for writing."""
        self._check_not_closed()
        return self._mode == _MODE_WRITE

def peek(self, size=-1):
        """Return buffered data without advancing the file position.

Always returns at least one byte of data, unless at EOF.
        The exact number of bytes returned is unspecified.
        """
        self._check_can_read()
        # Relies on the undocumented fact that BufferedReader.peek() always
        # returns at least one byte (except at EOF)
        return self._buffer.peek(size)

def read(self, size=-1):
        """Read up to size uncompressed bytes from the file.

If size is negative or omitted, read until EOF is reached.
        Returns b"" if the file is already at EOF.
        """
        self._check_can_read()
        return self._buffer.read(size)

def read1(self, size=-1):
        """Read up to size uncompressed bytes, while trying to avoid
        making multiple reads from the underlying stream. Reads up to a
        buffer's worth of data if size is negative.

Returns b"" if the file is at EOF.
        """
        self._check_can_read()
        if size < 0:
            size = io.DEFAULT_BUFFER_SIZE
        return self._buffer.read1(size)

def readline(self, size=-1):
        """Read a line of uncompressed bytes from the file.

The terminating newline (if present) is retained. If size is
        non-negative, no more than size bytes will be read (in which
        case the line may be incomplete). Returns b'' if already at EOF.
        """
        self._check_can_read()
        return self._buffer.readline(size)

def write(self, data):
        """Write a bytes object to the file.

Returns the number of uncompressed bytes written, which is
        always len(data). Note that due to buffering, the file on disk
        may not reflect the data written until close() is called.
        """
        self._check_can_write()
        compressed = self._compressor.compress(data)
        self._fp.write(compressed)
        self._pos += len(data)
        return len(data)

def seek(self, offset, whence=io.SEEK_SET):
        """Change the file position.

The new position is specified by offset, relative to the
        position indicated by whence. Possible values for whence are:

0: start of stream (default): offset must not be negative
            1: current stream position
            2: end of stream; offset must not be positive

Returns the new file position.

Note that seeking is emulated, so depending on the parameters,
        this operation may be extremely slow.
        """
        self._check_can_seek()
        return self._buffer.seek(offset, whence)

def tell(self):
        """Return the current file position."""
        self._check_not_closed()
        if self._mode == _MODE_READ:
            return self._buffer.tell()
        return self._pos

def open(filename, mode="rb", *,
         format=None, check=-1, preset=None, filters=None,
         encoding=None, errors=None, newline=None):
    """Open an LZMA-compressed file in binary or text mode.

filename can be either an actual file name (given as a str, bytes,
    or PathLike object), in which case the named file is opened, or it
    can be an existing file object to read from or write to.

The mode argument can be "r", "rb" (default), "w", "wb", "x", "xb",
    "a", or "ab" for binary mode, or "rt", "wt", "xt", or "at" for text
    mode.

The format, check, preset and filters arguments specify the
    compression settings, as for LZMACompressor, LZMADecompressor and
    LZMAFile.

For binary mode, this function is equivalent to the LZMAFile
    constructor: LZMAFile(filename, mode, ...). In this case, the
    encoding, errors and newline arguments must not be provided.

For text mode, an LZMAFile object is created, and wrapped in an
    io.TextIOWrapper instance with the specified encoding, error
    handling behavior, and line ending(s).

"""
    if "t" in mode:
        if "b" in mode:
            raise ValueError("Invalid mode: %r" % (mode,))
    else:
        if encoding is not None:
            raise ValueError("Argument 'encoding' not supported in binary mode")
        if errors is not None:
            raise ValueError("Argument 'errors' not supported in binary mode")
        if newline is not None:
            raise ValueError("Argument 'newline' not supported in binary mode")

lz_mode = mode.replace("t", "")
    binary_file = LZMAFile(filename, lz_mode, format=format, check=check,
                           preset=preset, filters=filters)

if "t" in mode:
        return io.TextIOWrapper(binary_file, encoding, errors, newline)
    else:
        return binary_file

def compress(data, format=FORMAT_XZ, check=-1, preset=None, filters=None):
    """Compress a block of data.

Refer to LZMACompressor's docstring for a description of the
    optional arguments *format*, *check*, *preset* and *filters*.

For incremental compression, use an LZMACompressor instead.
    """
    comp = LZMACompressor(format, check, preset, filters)
    return comp.compress(data) + comp.flush()

def decompress(data, format=FORMAT_AUTO, memlimit=None, filters=None):
    """Decompress a block of data.

Refer to LZMADecompressor's docstring for a description of the
    optional arguments *format*, *check* and *filters*.

For incremental decompression, use an LZMADecompressor instead.
    """
    results = []
    while True:
        decomp = LZMADecompressor(format, memlimit, filters)
        try:
            res = decomp.decompress(data)
        except LZMAError:
            if results:
                break  # Leftover data is not a valid LZMA/XZ stream; ignore it.
            else:
                raise  # Error on the first iteration; bail out.
        results.append(res)
        if not decomp.eof:
            raise LZMAError("Compressed data ended before the "
                            "end-of-stream marker was reached")
        data = decomp.unused_data
        if not data:
            break
    return b"".join(results)

cmd: