FM / python2.7

/usr/lib64/python2.7

Name	Size	Mode	Actions
bsddb/	-	0755	rm
compiler/	-	0755	rm
config/	-	0755	rm
ctypes/	-	0755	rm
curses/	-	0755	rm
distutils/	-	0755	rm
email/	-	0755	rm
encodings/	-	0755	rm
ensurepip/	-	0755	rm
hotshot/	-	0755	rm
idlelib/	-	0755	rm
importlib/	-	0755	rm
json/	-	0755	rm
lib-dynload/	-	0755	rm
lib2to3/	-	0755	rm
logging/	-	0755	rm
multiprocessing/	-	0755	rm
plat-linux2/	-	0755	rm
pydoc_data/	-	0755	rm
site-packages/	-	0755	rm
sqlite3/	-	0755	rm
test/	-	0755	rm
unittest/	-	0755	rm
wsgiref/	-	0755	rm
xml/	-	0755	rm
abc.py	7145	0644	edit dl rm
abc.pyc	6143	0644	edit dl rm
abc.pyo	6087	0644	edit dl rm
aifc.py	34579	0644	edit dl rm
aifc.pyc	30459	0644	edit dl rm
aifc.pyo	30459	0644	edit dl rm
antigravity.py	60	0644	edit dl rm
antigravity.pyc	203	0644	edit dl rm
antigravity.pyo	203	0644	edit dl rm
anydbm.py	2663	0644	edit dl rm
anydbm.pyc	2800	0644	edit dl rm
anydbm.pyo	2800	0644	edit dl rm
argparse.py	89228	0644	edit dl rm
argparse.pyc	64367	0644	edit dl rm
argparse.pyo	64202	0644	edit dl rm
ast.py	11805	0644	edit dl rm
ast.pyc	12938	0644	edit dl rm
ast.pyo	12938	0644	edit dl rm
asynchat.py	11581	0644	edit dl rm
asynchat.pyc	8810	0644	edit dl rm
asynchat.pyo	8810	0644	edit dl rm
asyncore.py	20943	0644	edit dl rm
asyncore.pyc	18893	0644	edit dl rm
asyncore.pyo	18893	0644	edit dl rm
atexit.py	1705	0644	edit dl rm
atexit.pyc	2203	0644	edit dl rm
atexit.pyo	2203	0644	edit dl rm
audiodev.py	7597	0644	edit dl rm
audiodev.pyc	8469	0644	edit dl rm
audiodev.pyo	8469	0644	edit dl rm
base64.py	11806	0755	edit dl rm
base64.pyc	11297	0644	edit dl rm
base64.pyo	11297	0644	edit dl rm
BaseHTTPServer.py	22747	0644	edit dl rm
BaseHTTPServer.pyc	21722	0644	edit dl rm
BaseHTTPServer.pyo	21722	0644	edit dl rm
Bastion.py	5744	0644	edit dl rm
Bastion.pyc	6660	0644	edit dl rm
Bastion.pyo	6660	0644	edit dl rm
bdb.py	21714	0644	edit dl rm
bdb.pyc	19101	0644	edit dl rm
bdb.pyo	19101	0644	edit dl rm
binhex.py	14698	0644	edit dl rm
binhex.pyc	15460	0644	edit dl rm
binhex.pyo	15460	0644	edit dl rm
bisect.py	2595	0644	edit dl rm
bisect.pyc	3071	0644	edit dl rm
bisect.pyo	3071	0644	edit dl rm
calendar.py	23384	0644	edit dl rm
calendar.pyc	27913	0644	edit dl rm
calendar.pyo	27913	0644	edit dl rm
cgi.py	36308	0755	edit dl rm
cgi.pyc	33366	0644	edit dl rm
cgi.pyo	33366	0644	edit dl rm
CGIHTTPServer.py	13089	0644	edit dl rm
CGIHTTPServer.pyc	11018	0644	edit dl rm
CGIHTTPServer.pyo	11018	0644	edit dl rm
cgitb.py	12175	0644	edit dl rm
cgitb.pyc	12138	0644	edit dl rm
cgitb.pyo	12138	0644	edit dl rm
chunk.py	5419	0644	edit dl rm
chunk.pyc	5602	0644	edit dl rm
chunk.pyo	5602	0644	edit dl rm
cmd.py	15026	0644	edit dl rm
cmd.pyc	14039	0644	edit dl rm
cmd.pyo	14039	0644	edit dl rm
code.py	10189	0644	edit dl rm
code.pyc	10334	0644	edit dl rm
code.pyo	10334	0644	edit dl rm
codecs.py	36143	0644	edit dl rm
codecs.pyc	36824	0644	edit dl rm
codecs.pyo	36824	0644	edit dl rm
codeop.py	5999	0644	edit dl rm
codeop.pyc	6597	0644	edit dl rm
codeop.pyo	6597	0644	edit dl rm
collections.py	27798	0644	edit dl rm
collections.pyc	26163	0644	edit dl rm
collections.pyo	26112	0644	edit dl rm
colorsys.py	3691	0644	edit dl rm
colorsys.pyc	3991	0644	edit dl rm
colorsys.pyo	3991	0644	edit dl rm
commands.py	2545	0644	edit dl rm
commands.pyc	2469	0644	edit dl rm
commands.pyo	2469	0644	edit dl rm
compileall.py	7763	0644	edit dl rm
compileall.pyc	7017	0644	edit dl rm
compileall.pyo	7017	0644	edit dl rm
ConfigParser.py	27746	0644	edit dl rm
ConfigParser.pyc	25213	0644	edit dl rm
ConfigParser.pyo	25213	0644	edit dl rm
contextlib.py	4424	0644	edit dl rm
contextlib.pyc	4454	0644	edit dl rm
contextlib.pyo	4454	0644	edit dl rm
Cookie.py	26538	0644	edit dl rm
Cookie.pyc	22658	0644	edit dl rm
Cookie.pyo	22658	0644	edit dl rm
cookielib.py	65486	0644	edit dl rm
cookielib.pyc	54725	0644	edit dl rm
cookielib.pyo	54537	0644	edit dl rm
copy.py	11533	0644	edit dl rm
copy.pyc	12170	0644	edit dl rm
copy.pyo	12078	0644	edit dl rm
copy_reg.py	6974	0644	edit dl rm
copy_reg.pyc	5167	0644	edit dl rm
copy_reg.pyo	5123	0644	edit dl rm
cProfile.py	6573	0755	edit dl rm
cProfile.pyc	6395	0644	edit dl rm
cProfile.pyo	6395	0644	edit dl rm
crypt.py	2292	0644	edit dl rm
crypt.pyc	2960	0644	edit dl rm
crypt.pyo	2960	0644	edit dl rm
csv.py	16708	0644	edit dl rm
csv.pyc	13507	0644	edit dl rm
csv.pyo	13507	0644	edit dl rm
dbhash.py	498	0644	edit dl rm
dbhash.pyc	718	0644	edit dl rm
dbhash.pyo	718	0644	edit dl rm
decimal.py	221933	0644	edit dl rm
decimal.pyc	172155	0644	edit dl rm
decimal.pyo	172155	0644	edit dl rm
difflib.py	82325	0644	edit dl rm
difflib.pyc	61898	0644	edit dl rm
difflib.pyo	61847	0644	edit dl rm
dircache.py	1126	0644	edit dl rm
dircache.pyc	1576	0644	edit dl rm
dircache.pyo	1576	0644	edit dl rm
dis.py	6499	0644	edit dl rm
dis.pyc	6228	0644	edit dl rm
dis.pyo	6228	0644	edit dl rm
doctest.py	105095	0644	edit dl rm
doctest.pyc	83637	0644	edit dl rm
doctest.pyo	83350	0644	edit dl rm
DocXMLRPCServer.py	10768	0644	edit dl rm
DocXMLRPCServer.pyc	10195	0644	edit dl rm
DocXMLRPCServer.pyo	10086	0644	edit dl rm
dumbdbm.py	9141	0644	edit dl rm
dumbdbm.pyc	6746	0644	edit dl rm
dumbdbm.pyo	6746	0644	edit dl rm
dummy_thread.py	4418	0644	edit dl rm
dummy_thread.pyc	5394	0644	edit dl rm
dummy_thread.pyo	5394	0644	edit dl rm
dummy_threading.py	2804	0644	edit dl rm
dummy_threading.pyc	1285	0644	edit dl rm
dummy_threading.pyo	1285	0644	edit dl rm
filecmp.py	9588	0644	edit dl rm
filecmp.pyc	9622	0644	edit dl rm
filecmp.pyo	9622	0644	edit dl rm
fileinput.py	13746	0644	edit dl rm
fileinput.pyc	14500	0644	edit dl rm
fileinput.pyo	14500	0644	edit dl rm
fnmatch.py	3315	0644	edit dl rm
fnmatch.pyc	3614	0644	edit dl rm
fnmatch.pyo	3614	0644	edit dl rm
formatter.py	14911	0644	edit dl rm
formatter.pyc	19178	0644	edit dl rm
formatter.pyo	19178	0644	edit dl rm
fpformat.py	4732	0644	edit dl rm
fpformat.pyc	4703	0644	edit dl rm
fpformat.pyo	4703	0644	edit dl rm
fractions.py	22390	0644	edit dl rm
fractions.pyc	19711	0644	edit dl rm
fractions.pyo	19711	0644	edit dl rm
ftplib.py	38555	0644	edit dl rm
ftplib.pyc	34939	0644	edit dl rm
ftplib.pyo	34939	0644	edit dl rm
functools.py	4806	0644	edit dl rm
functools.pyc	6629	0644	edit dl rm
functools.pyo	6629	0644	edit dl rm
genericpath.py	3201	0644	edit dl rm
genericpath.pyc	3517	0644	edit dl rm
genericpath.pyo	3517	0644	edit dl rm
getopt.py	7319	0644	edit dl rm
getopt.pyc	6654	0644	edit dl rm
getopt.pyo	6609	0644	edit dl rm
getpass.py	5563	0644	edit dl rm
getpass.pyc	4744	0644	edit dl rm
getpass.pyo	4744	0644	edit dl rm
gettext.py	22666	0644	edit dl rm
gettext.pyc	18004	0644	edit dl rm
gettext.pyo	18004	0644	edit dl rm
glob.py	3114	0644	edit dl rm
glob.pyc	2943	0644	edit dl rm
glob.pyo	2943	0644	edit dl rm
gzip.py	19028	0644	edit dl rm
gzip.pyc	15236	0644	edit dl rm
gzip.pyo	15236	0644	edit dl rm
hashlib.py	7841	0644	edit dl rm
hashlib.pyc	6919	0644	edit dl rm
hashlib.pyo	6919	0644	edit dl rm
heapq.py	18295	0644	edit dl rm
heapq.pyc	14564	0644	edit dl rm
heapq.pyo	14564	0644	edit dl rm
hmac.py	4588	0644	edit dl rm
hmac.pyc	4542	0644	edit dl rm
hmac.pyo	4542	0644	edit dl rm
htmlentitydefs.py	18056	0644	edit dl rm
htmlentitydefs.pyc	6367	0644	edit dl rm
htmlentitydefs.pyo	6367	0644	edit dl rm
htmllib.py	12869	0644	edit dl rm
htmllib.pyc	20309	0644	edit dl rm
htmllib.pyo	20309	0644	edit dl rm
HTMLParser.py	17171	0644	edit dl rm
HTMLParser.pyc	13727	0644	edit dl rm
HTMLParser.pyo	13422	0644	edit dl rm
httplib.py	53306	0644	edit dl rm
httplib.pyc	38724	0644	edit dl rm
httplib.pyo	38540	0644	edit dl rm
ihooks.py	18986	0644	edit dl rm
ihooks.pyc	21372	0644	edit dl rm
ihooks.pyo	21372	0644	edit dl rm
imaplib.py	48366	0644	edit dl rm
imaplib.pyc	45011	0644	edit dl rm
imaplib.pyo	42310	0644	edit dl rm
imghdr.py	3541	0644	edit dl rm
imghdr.pyc	4838	0644	edit dl rm
imghdr.pyo	4838	0644	edit dl rm
imputil.py	25764	0644	edit dl rm
imputil.pyc	15623	0644	edit dl rm
imputil.pyo	15445	0644	edit dl rm
inspect.py	43008	0644	edit dl rm
inspect.pyc	40229	0644	edit dl rm
inspect.pyo	40229	0644	edit dl rm
io.py	3322	0644	edit dl rm
io.pyc	3589	0644	edit dl rm
io.pyo	3589	0644	edit dl rm
keyword.py	1995	0755	edit dl rm
keyword.pyc	2105	0644	edit dl rm
keyword.pyo	2105	0644	edit dl rm
linecache.py	4027	0644	edit dl rm
linecache.pyc	3272	0644	edit dl rm
linecache.pyo	3272	0644	edit dl rm
locale.py	102834	0644	edit dl rm
locale.pyc	56610	0644	edit dl rm
locale.pyo	56610	0644	edit dl rm
macpath.py	6289	0644	edit dl rm
macpath.pyc	7681	0644	edit dl rm
macpath.pyo	7681	0644	edit dl rm
macurl2path.py	2731	0644	edit dl rm
macurl2path.pyc	2244	0644	edit dl rm
macurl2path.pyo	2244	0644	edit dl rm
mailbox.py	81240	0644	edit dl rm
mailbox.pyc	76717	0644	edit dl rm
mailbox.pyo	76670	0644	edit dl rm
mailcap.py	8404	0644	edit dl rm
mailcap.pyc	7955	0644	edit dl rm
mailcap.pyo	7955	0644	edit dl rm
markupbase.py	14643	0644	edit dl rm
markupbase.pyc	9267	0644	edit dl rm
markupbase.pyo	9071	0644	edit dl rm
md5.py	358	0644	edit dl rm
md5.pyc	378	0644	edit dl rm
md5.pyo	378	0644	edit dl rm
mhlib.py	33434	0644	edit dl rm
mhlib.pyc	33777	0644	edit dl rm
mhlib.pyo	33777	0644	edit dl rm
mimetools.py	7168	0644	edit dl rm
mimetools.pyc	8201	0644	edit dl rm
mimetools.pyo	8201	0644	edit dl rm
mimetypes.py	21028	0644	edit dl rm
mimetypes.pyc	18489	0644	edit dl rm
mimetypes.pyo	18489	0644	edit dl rm
MimeWriter.py	6482	0644	edit dl rm
MimeWriter.pyc	7364	0644	edit dl rm
MimeWriter.pyo	7364	0644	edit dl rm
mimify.py	15020	0755	edit dl rm
mimify.pyc	12001	0644	edit dl rm
mimify.pyo	12001	0644	edit dl rm
modulefinder.py	24461	0644	edit dl rm
modulefinder.pyc	19127	0644	edit dl rm
modulefinder.pyo	19045	0644	edit dl rm
multifile.py	4820	0644	edit dl rm
multifile.pyc	5420	0644	edit dl rm
multifile.pyo	5378	0644	edit dl rm
mutex.py	1878	0644	edit dl rm
mutex.pyc	2516	0644	edit dl rm
mutex.pyo	2516	0644	edit dl rm
netrc.py	5888	0644	edit dl rm
netrc.pyc	4714	0644	edit dl rm
netrc.pyo	4714	0644	edit dl rm
new.py	610	0644	edit dl rm
new.pyc	862	0644	edit dl rm
new.pyo	862	0644	edit dl rm
nntplib.py	21470	0644	edit dl rm
nntplib.pyc	21044	0644	edit dl rm
nntplib.pyo	21044	0644	edit dl rm
ntpath.py	19429	0644	edit dl rm
ntpath.pyc	13129	0644	edit dl rm
ntpath.pyo	13129	0644	edit dl rm
nturl2path.py	2419	0644	edit dl rm
nturl2path.pyc	1815	0644	edit dl rm
nturl2path.pyo	1815	0644	edit dl rm
numbers.py	10319	0644	edit dl rm
numbers.pyc	14012	0644	edit dl rm
numbers.pyo	14012	0644	edit dl rm
opcode.py	5474	0644	edit dl rm
opcode.pyc	6145	0644	edit dl rm
opcode.pyo	6145	0644	edit dl rm
optparse.py	61203	0644	edit dl rm
optparse.pyc	53894	0644	edit dl rm
optparse.pyo	53811	0644	edit dl rm
os.py	25910	0644	edit dl rm
os.pyc	25689	0644	edit dl rm
os.pyo	25689	0644	edit dl rm
os2emxpath.py	4635	0644	edit dl rm
os2emxpath.pyc	4525	0644	edit dl rm
os2emxpath.pyo	4525	0644	edit dl rm
pdb.doc	7914	0644	edit dl rm
pdb.py	46098	0755	edit dl rm
pdb.pyc	43669	0644	edit dl rm
pdb.pyo	43669	0644	edit dl rm
pickle.py	45489	0644	edit dl rm
pickle.pyc	38560	0644	edit dl rm
pickle.pyo	38364	0644	edit dl rm
pickletools.py	74523	0644	edit dl rm
pickletools.pyc	57032	0644	edit dl rm
pickletools.pyo	56171	0644	edit dl rm
pipes.py	9582	0644	edit dl rm
pipes.pyc	9308	0644	edit dl rm
pipes.pyo	9308	0644	edit dl rm
pkgutil.py	20243	0644	edit dl rm
pkgutil.pyc	18959	0644	edit dl rm
pkgutil.pyo	18959	0644	edit dl rm
platform.py	52801	0755	edit dl rm
platform.pyc	37971	0644	edit dl rm
platform.pyo	37971	0644	edit dl rm
plistlib.py	15810	0644	edit dl rm
plistlib.pyc	19963	0644	edit dl rm
plistlib.pyo	19877	0644	edit dl rm
popen2.py	8416	0644	edit dl rm
popen2.pyc	9025	0644	edit dl rm
popen2.pyo	8983	0644	edit dl rm
poplib.py	12824	0644	edit dl rm
poplib.pyc	13345	0644	edit dl rm
poplib.pyo	13345	0644	edit dl rm
posixfile.py	8003	0644	edit dl rm
posixfile.pyc	7652	0644	edit dl rm
posixfile.pyo	7652	0644	edit dl rm
posixpath.py	14293	0644	edit dl rm
posixpath.pyc	11462	0644	edit dl rm
posixpath.pyo	11462	0644	edit dl rm
pprint.py	11777	0644	edit dl rm
pprint.pyc	10194	0644	edit dl rm
pprint.pyo	10017	0644	edit dl rm
profile.py	22781	0755	edit dl rm
profile.pyc	16456	0644	edit dl rm
profile.pyo	16209	0644	edit dl rm
pstats.py	26712	0644	edit dl rm
pstats.pyc	25013	0644	edit dl rm
pstats.pyo	25013	0644	edit dl rm
pty.py	5058	0644	edit dl rm
pty.pyc	4966	0644	edit dl rm
pty.pyo	4966	0644	edit dl rm
pyclbr.py	13388	0644	edit dl rm
pyclbr.pyc	9651	0644	edit dl rm
pyclbr.pyo	9651	0644	edit dl rm
pydoc.py	95739	0755	edit dl rm
pydoc.pyc	92342	0644	edit dl rm
pydoc.pyo	92278	0644	edit dl rm
py_compile.py	5936	0644	edit dl rm
py_compile.pyc	6428	0644	edit dl rm
py_compile.pyo	6428	0644	edit dl rm
Queue.py	8577	0644	edit dl rm
Queue.pyc	9424	0644	edit dl rm
Queue.pyo	9424	0644	edit dl rm
quopri.py	6968	0755	edit dl rm
quopri.pyc	6574	0644	edit dl rm
quopri.pyo	6574	0644	edit dl rm
random.py	32457	0644	edit dl rm
random.pyc	25704	0644	edit dl rm
random.pyo	25704	0644	edit dl rm
re.py	13423	0644	edit dl rm
re.pyc	13413	0644	edit dl rm
re.pyo	13413	0644	edit dl rm
repr.py	4296	0644	edit dl rm
repr.pyc	5385	0644	edit dl rm
repr.pyo	5385	0644	edit dl rm
rexec.py	20148	0644	edit dl rm
rexec.pyc	23807	0644	edit dl rm
rexec.pyo	23807	0644	edit dl rm
rfc822.py	33542	0644	edit dl rm
rfc822.pyc	31813	0644	edit dl rm
rfc822.pyo	31813	0644	edit dl rm
rlcompleter.py	5991	0644	edit dl rm
rlcompleter.pyc	6078	0644	edit dl rm
rlcompleter.pyo	6078	0644	edit dl rm
robotparser.py	7695	0644	edit dl rm
robotparser.pyc	8003	0644	edit dl rm
robotparser.pyo	8003	0644	edit dl rm
runpy.py	11081	0644	edit dl rm
runpy.pyc	8803	0644	edit dl rm
runpy.pyo	8803	0644	edit dl rm
sched.py	5088	0644	edit dl rm
sched.pyc	4994	0644	edit dl rm
sched.pyo	4994	0644	edit dl rm
sets.py	19050	0644	edit dl rm
sets.pyc	16895	0644	edit dl rm
sets.pyo	16895	0644	edit dl rm
sgmllib.py	17884	0644	edit dl rm
sgmllib.pyc	15436	0644	edit dl rm
sgmllib.pyo	15436	0644	edit dl rm
sha.py	393	0644	edit dl rm
sha.pyc	421	0644	edit dl rm
sha.pyo	421	0644	edit dl rm
shelve.py	8178	0644	edit dl rm
shelve.pyc	10256	0644	edit dl rm
shelve.pyo	10256	0644	edit dl rm
shlex.py	11164	0644	edit dl rm
shlex.pyc	7558	0644	edit dl rm
shlex.pyo	7558	0644	edit dl rm
shutil.py	19871	0644	edit dl rm
shutil.pyc	19259	0644	edit dl rm
shutil.pyo	19259	0644	edit dl rm
SimpleHTTPServer.py	7997	0644	edit dl rm
SimpleHTTPServer.pyc	8010	0644	edit dl rm
SimpleHTTPServer.pyo	8010	0644	edit dl rm
SimpleXMLRPCServer.py	25812	0644	edit dl rm
SimpleXMLRPCServer.pyc	22863	0644	edit dl rm
SimpleXMLRPCServer.pyo	22863	0644	edit dl rm
site.py	21296	0644	edit dl rm
site.pyc	20786	0644	edit dl rm
site.pyo	20786	0644	edit dl rm
smtpd.py	18542	0755	edit dl rm
smtpd.pyc	15883	0644	edit dl rm
smtpd.pyo	15883	0644	edit dl rm
smtplib.py	32134	0755	edit dl rm
smtplib.pyc	30304	0644	edit dl rm
smtplib.pyo	30304	0644	edit dl rm
sndhdr.py	5973	0644	edit dl rm
sndhdr.pyc	7361	0644	edit dl rm
sndhdr.pyo	7361	0644	edit dl rm
socket.py	20615	0644	edit dl rm
socket.pyc	16152	0644	edit dl rm
socket.pyo	16066	0644	edit dl rm
SocketServer.py	23948	0644	edit dl rm
SocketServer.pyc	24087	0644	edit dl rm
SocketServer.pyo	24087	0644	edit dl rm
sre.py	384	0644	edit dl rm
sre.pyc	519	0644	edit dl rm
sre.pyo	519	0644	edit dl rm
sre_compile.py	19823	0644	edit dl rm
sre_compile.pyc	12560	0644	edit dl rm
sre_compile.pyo	12404	0644	edit dl rm
sre_constants.py	7197	0644	edit dl rm
sre_constants.pyc	6195	0644	edit dl rm
sre_constants.pyo	6195	0644	edit dl rm
sre_parse.py	30700	0644	edit dl rm
sre_parse.pyc	21156	0644	edit dl rm
sre_parse.pyo	21156	0644	edit dl rm
ssl.py	39310	0644	edit dl rm
ssl.pyc	32716	0644	edit dl rm
ssl.pyo	32716	0644	edit dl rm
stat.py	1842	0644	edit dl rm
stat.pyc	2751	0644	edit dl rm
stat.pyo	2751	0644	edit dl rm
statvfs.py	898	0644	edit dl rm
statvfs.pyc	620	0644	edit dl rm
statvfs.pyo	620	0644	edit dl rm
string.py	21548	0644	edit dl rm
string.pyc	20459	0644	edit dl rm
string.pyo	20459	0644	edit dl rm
StringIO.py	10662	0644	edit dl rm
StringIO.pyc	11480	0644	edit dl rm
StringIO.pyo	11480	0644	edit dl rm
stringold.py	12449	0644	edit dl rm
stringold.pyc	12549	0644	edit dl rm
stringold.pyo	12549	0644	edit dl rm
stringprep.py	13522	0644	edit dl rm
stringprep.pyc	14487	0644	edit dl rm
stringprep.pyo	14415	0644	edit dl rm
struct.py	82	0644	edit dl rm
struct.pyc	239	0644	edit dl rm
struct.pyo	239	0644	edit dl rm
subprocess.py	50520	0644	edit dl rm
subprocess.pyc	32398	0644	edit dl rm
subprocess.pyo	32398	0644	edit dl rm
sunau.py	17222	0644	edit dl rm
sunau.pyc	18394	0644	edit dl rm
sunau.pyo	18394	0644	edit dl rm
sunaudio.py	1399	0644	edit dl rm
sunaudio.pyc	1987	0644	edit dl rm
sunaudio.pyo	1987	0644	edit dl rm
symbol.py	2057	0755	edit dl rm
symbol.pyc	3026	0644	edit dl rm
symbol.pyo	3026	0644	edit dl rm
symtable.py	7437	0644	edit dl rm
symtable.pyc	11786	0644	edit dl rm
symtable.pyo	11655	0644	edit dl rm
sysconfig.py	22852	0644	edit dl rm
sysconfig.pyc	17818	0644	edit dl rm
sysconfig.pyo	17818	0644	edit dl rm
tabnanny.py	11339	0755	edit dl rm
tabnanny.pyc	8247	0644	edit dl rm
tabnanny.pyo	8247	0644	edit dl rm
tarfile.py	90655	0644	edit dl rm
tarfile.pyc	76193	0644	edit dl rm
tarfile.pyo	76193	0644	edit dl rm
telnetlib.py	27036	0644	edit dl rm
telnetlib.pyc	23154	0644	edit dl rm
telnetlib.pyo	23154	0644	edit dl rm
tempfile.py	19547	0644	edit dl rm
tempfile.pyc	20344	0644	edit dl rm
tempfile.pyo	20344	0644	edit dl rm
textwrap.py	17280	0644	edit dl rm
textwrap.pyc	12097	0644	edit dl rm
textwrap.pyo	12005	0644	edit dl rm
this.py	1002	0644	edit dl rm
this.pyc	1220	0644	edit dl rm
this.pyo	1220	0644	edit dl rm
threading.py	47377	0644	edit dl rm
threading.pyc	42726	0644	edit dl rm
threading.pyo	40552	0644	edit dl rm
timeit.py	12791	0755	edit dl rm
timeit.pyc	12183	0644	edit dl rm
timeit.pyo	12183	0644	edit dl rm
toaiff.py	3142	0644	edit dl rm
toaiff.pyc	3106	0644	edit dl rm
toaiff.pyo	3106	0644	edit dl rm
token.py	2922	0644	edit dl rm
token.pyc	3816	0644	edit dl rm
token.pyo	3816	0644	edit dl rm
tokenize.py	17483	0644	edit dl rm
tokenize.pyc	14505	0644	edit dl rm
tokenize.pyo	14449	0644	edit dl rm
trace.py	29891	0755	edit dl rm
trace.pyc	22793	0644	edit dl rm
trace.pyo	22730	0644	edit dl rm
traceback.py	11285	0644	edit dl rm
traceback.pyc	11679	0644	edit dl rm
traceback.pyo	11679	0644	edit dl rm
tty.py	879	0644	edit dl rm
tty.pyc	1317	0644	edit dl rm
tty.pyo	1317	0644	edit dl rm
types.py	2094	0644	edit dl rm
types.pyc	2725	0644	edit dl rm
types.pyo	2725	0644	edit dl rm
urllib.py	60228	0644	edit dl rm
urllib.pyc	51241	0644	edit dl rm
urllib.pyo	51146	0644	edit dl rm
urllib2.py	52541	0644	edit dl rm
urllib2.pyc	47302	0644	edit dl rm
urllib2.pyo	47207	0644	edit dl rm
urlparse.py	20461	0644	edit dl rm
urlparse.pyc	18015	0644	edit dl rm
urlparse.pyo	18015	0644	edit dl rm
user.py	1627	0644	edit dl rm
user.pyc	1724	0644	edit dl rm
user.pyo	1724	0644	edit dl rm
UserDict.py	7060	0644	edit dl rm
UserDict.pyc	9711	0644	edit dl rm
UserDict.pyo	9711	0644	edit dl rm
UserList.py	3644	0644	edit dl rm
UserList.pyc	6577	0644	edit dl rm
UserList.pyo	6577	0644	edit dl rm
UserString.py	9687	0755	edit dl rm
UserString.pyc	14864	0644	edit dl rm
UserString.pyo	14864	0644	edit dl rm
uu.py	6697	0755	edit dl rm
uu.pyc	4390	0644	edit dl rm
uu.pyo	4390	0644	edit dl rm
uuid.py	23530	0644	edit dl rm
uuid.pyc	23366	0644	edit dl rm
uuid.pyo	23250	0644	edit dl rm
warnings.py	14823	0644	edit dl rm
warnings.pyc	13510	0644	edit dl rm
warnings.pyo	12721	0644	edit dl rm
wave.py	18582	0644	edit dl rm
wave.pyc	20013	0644	edit dl rm
wave.pyo	19869	0644	edit dl rm
weakref.py	14830	0644	edit dl rm
weakref.pyc	16441	0644	edit dl rm
weakref.pyo	16441	0644	edit dl rm
webbrowser.py	22725	0755	edit dl rm
webbrowser.pyc	19750	0644	edit dl rm
webbrowser.pyo	19705	0644	edit dl rm
whichdb.py	3379	0644	edit dl rm
whichdb.pyc	2241	0644	edit dl rm
whichdb.pyo	2241	0644	edit dl rm
wsgiref.egg-info	187	0644	edit dl rm
xdrlib.py	6069	0644	edit dl rm
xdrlib.pyc	9902	0644	edit dl rm
xdrlib.pyo	9902	0644	edit dl rm
xmllib.py	34865	0644	edit dl rm
xmllib.pyc	26848	0644	edit dl rm
xmllib.pyo	26848	0644	edit dl rm
xmlrpclib.py	52136	0644	edit dl rm
xmlrpclib.pyc	44106	0644	edit dl rm
xmlrpclib.pyo	43922	0644	edit dl rm
zipfile.py	59477	0644	edit dl rm
zipfile.pyc	42137	0644	edit dl rm
zipfile.pyo	42137	0644	edit dl rm
_abcoll.py	18619	0644	edit dl rm
_abcoll.pyc	25682	0644	edit dl rm
_abcoll.pyo	25682	0644	edit dl rm
_LWPCookieJar.py	6553	0644	edit dl rm
_LWPCookieJar.pyc	5434	0644	edit dl rm
_LWPCookieJar.pyo	5434	0644	edit dl rm
_MozillaCookieJar.py	5797	0644	edit dl rm
_MozillaCookieJar.pyc	4461	0644	edit dl rm
_MozillaCookieJar.pyo	4422	0644	edit dl rm
_osx_support.py	19100	0644	edit dl rm
_osx_support.pyc	11758	0644	edit dl rm
_osx_support.pyo	11758	0644	edit dl rm
_pyio.py	69630	0644	edit dl rm
_pyio.pyc	64701	0644	edit dl rm
_pyio.pyo	64701	0644	edit dl rm
_strptime.py	20728	0644	edit dl rm
_strptime.pyc	15172	0644	edit dl rm
_strptime.pyo	15172	0644	edit dl rm
_sysconfigdata.py	19732	0644	edit dl rm
_sysconfigdata.pyc	22968	0644	edit dl rm
_sysconfigdata.pyo	22968	0644	edit dl rm
_threading_local.py	7260	0644	edit dl rm
_threading_local.pyc	6373	0644	edit dl rm
_threading_local.pyo	6373	0644	edit dl rm
_weakrefset.py	5911	0644	edit dl rm
_weakrefset.pyc	9678	0644	edit dl rm
_weakrefset.pyo	9678	0644	edit dl rm
__future__.py	4380	0644	edit dl rm
__future__.pyc	4223	0644	edit dl rm
__future__.pyo	4223	0644	edit dl rm
__phello__.foo.py	64	0644	edit dl rm
__phello__.foo.pyc	125	0644	edit dl rm
__phello__.foo.pyo	125	0644	edit dl rm

Edit: /usr/lib64/python2.7/threading.py (47377B)

"""Thread module emulating a subset of Java's threading model."""

import sys as _sys

try:
    import thread
except ImportError:
    del _sys.modules[__name__]
    raise

import warnings

from collections import deque as _deque
from itertools import count as _count
from time import time as _time, sleep as _sleep
from traceback import format_exc as _format_exc

# Note regarding PEP 8 compliant aliases
#  This threading model was originally inspired by Java, and inherited
# the convention of camelCase function and method names from that
# language. While those names are not in any imminent danger of being
# deprecated, starting with Python 2.6, the module now provides a
# PEP 8 compliant alias for any such method name.
# Using the new PEP 8 compliant names also facilitates substitution
# with the multiprocessing module, which doesn't provide the old
# Java inspired names.

# Rename some stuff so "from threading import *" is safe
__all__ = ['activeCount', 'active_count', 'Condition', 'currentThread',
           'current_thread', 'enumerate', 'Event',
           'Lock', 'RLock', 'Semaphore', 'BoundedSemaphore', 'Thread',
           'Timer', 'setprofile', 'settrace', 'local', 'stack_size']

_start_new_thread = thread.start_new_thread
_allocate_lock = thread.allocate_lock
_get_ident = thread.get_ident
ThreadError = thread.error
del thread

# sys.exc_clear is used to work around the fact that except blocks
# don't fully clear the exception until 3.0.
warnings.filterwarnings('ignore', category=DeprecationWarning,
                        module='threading', message='sys.exc_clear')

# Debug support (adapted from ihooks.py).
# All the major classes here derive from _Verbose.  We force that to
# be a new-style class so that all the major classes here are new-style.
# This helps debugging (type(instance) is more revealing for instances
# of new-style classes).

_VERBOSE = False

if __debug__:

class _Verbose(object):

def __init__(self, verbose=None):
            if verbose is None:
                verbose = _VERBOSE
            self.__verbose = verbose

def _note(self, format, *args):
            if self.__verbose:
                format = format % args
                # Issue #4188: calling current_thread() can incur an infinite
                # recursion if it has to create a DummyThread on the fly.
                ident = _get_ident()
                try:
                    name = _active[ident].name
                except KeyError:
                    name = "<OS thread %d>" % ident
                format = "%s: %s\n" % (name, format)
                _sys.stderr.write(format)

else:
    # Disable this when using "python -O"
    class _Verbose(object):
        def __init__(self, verbose=None):
            pass
        def _note(self, *args):
            pass

# Support for profile and trace hooks

_profile_hook = None
_trace_hook = None

def setprofile(func):
    """Set a profile function for all threads started from the threading module.

The func will be passed to sys.setprofile() for each thread, before its
    run() method is called.

"""
    global _profile_hook
    _profile_hook = func

def settrace(func):
    """Set a trace function for all threads started from the threading module.

The func will be passed to sys.settrace() for each thread, before its run()
    method is called.

"""
    global _trace_hook
    _trace_hook = func

# Synchronization classes

Lock = _allocate_lock

def RLock(*args, **kwargs):
    """Factory function that returns a new reentrant lock.

A reentrant lock must be released by the thread that acquired it. Once a
    thread has acquired a reentrant lock, the same thread may acquire it again
    without blocking; the thread must release it once for each time it has
    acquired it.

"""
    return _RLock(*args, **kwargs)

class _RLock(_Verbose):
    """A reentrant lock must be released by the thread that acquired it. Once a
       thread has acquired a reentrant lock, the same thread may acquire it
       again without blocking; the thread must release it once for each time it
       has acquired it.
    """

def __init__(self, verbose=None):
        _Verbose.__init__(self, verbose)
        self.__block = _allocate_lock()
        self.__owner = None
        self.__count = 0

def __repr__(self):
        owner = self.__owner
        try:
            owner = _active[owner].name
        except KeyError:
            pass
        return "<%s owner=%r count=%d>" % (
                self.__class__.__name__, owner, self.__count)

def acquire(self, blocking=1):
        """Acquire a lock, blocking or non-blocking.

When invoked without arguments: if this thread already owns the lock,
        increment the recursion level by one, and return immediately. Otherwise,
        if another thread owns the lock, block until the lock is unlocked. Once
        the lock is unlocked (not owned by any thread), then grab ownership, set
        the recursion level to one, and return. If more than one thread is
        blocked waiting until the lock is unlocked, only one at a time will be
        able to grab ownership of the lock. There is no return value in this
        case.

When invoked with the blocking argument set to true, do the same thing
        as when called without arguments, and return true.

When invoked with the blocking argument set to false, do not block. If a
        call without an argument would block, return false immediately;
        otherwise, do the same thing as when called without arguments, and
        return true.

"""
        me = _get_ident()
        if self.__owner == me:
            self.__count = self.__count + 1
            if __debug__:
                self._note("%s.acquire(%s): recursive success", self, blocking)
            return 1
        rc = self.__block.acquire(blocking)
        if rc:
            self.__owner = me
            self.__count = 1
            if __debug__:
                self._note("%s.acquire(%s): initial success", self, blocking)
        else:
            if __debug__:
                self._note("%s.acquire(%s): failure", self, blocking)
        return rc

__enter__ = acquire

def release(self):
        """Release a lock, decrementing the recursion level.

If after the decrement it is zero, reset the lock to unlocked (not owned
        by any thread), and if any other threads are blocked waiting for the
        lock to become unlocked, allow exactly one of them to proceed. If after
        the decrement the recursion level is still nonzero, the lock remains
        locked and owned by the calling thread.

Only call this method when the calling thread owns the lock. A
        RuntimeError is raised if this method is called when the lock is
        unlocked.

There is no return value.

"""
        if self.__owner != _get_ident():
            raise RuntimeError("cannot release un-acquired lock")
        self.__count = count = self.__count - 1
        if not count:
            self.__owner = None
            self.__block.release()
            if __debug__:
                self._note("%s.release(): final release", self)
        else:
            if __debug__:
                self._note("%s.release(): non-final release", self)

def __exit__(self, t, v, tb):
        self.release()

# Internal methods used by condition variables

def _acquire_restore(self, count_owner):
        count, owner = count_owner
        self.__block.acquire()
        self.__count = count
        self.__owner = owner
        if __debug__:
            self._note("%s._acquire_restore()", self)

def _release_save(self):
        if __debug__:
            self._note("%s._release_save()", self)
        count = self.__count
        self.__count = 0
        owner = self.__owner
        self.__owner = None
        self.__block.release()
        return (count, owner)

def _is_owned(self):
        return self.__owner == _get_ident()

def Condition(*args, **kwargs):
    """Factory function that returns a new condition variable object.

A condition variable allows one or more threads to wait until they are
    notified by another thread.

If the lock argument is given and not None, it must be a Lock or RLock
    object, and it is used as the underlying lock. Otherwise, a new RLock object
    is created and used as the underlying lock.

"""
    return _Condition(*args, **kwargs)

class _Condition(_Verbose):
    """Condition variables allow one or more threads to wait until they are
       notified by another thread.
    """

def __init__(self, lock=None, verbose=None):
        _Verbose.__init__(self, verbose)
        if lock is None:
            lock = RLock()
        self.__lock = lock
        # Export the lock's acquire() and release() methods
        self.acquire = lock.acquire
        self.release = lock.release
        # If the lock defines _release_save() and/or _acquire_restore(),
        # these override the default implementations (which just call
        # release() and acquire() on the lock).  Ditto for _is_owned().
        try:
            self._release_save = lock._release_save
        except AttributeError:
            pass
        try:
            self._acquire_restore = lock._acquire_restore
        except AttributeError:
            pass
        try:
            self._is_owned = lock._is_owned
        except AttributeError:
            pass
        self.__waiters = []

def __enter__(self):
        return self.__lock.__enter__()

def __exit__(self, *args):
        return self.__lock.__exit__(*args)

def __repr__(self):
        return "<Condition(%s, %d)>" % (self.__lock, len(self.__waiters))

def _release_save(self):
        self.__lock.release()           # No state to save

def _acquire_restore(self, x):
        self.__lock.acquire()           # Ignore saved state

def _is_owned(self):
        # Return True if lock is owned by current_thread.
        # This method is called only if __lock doesn't have _is_owned().
        if self.__lock.acquire(0):
            self.__lock.release()
            return False
        else:
            return True

def wait(self, timeout=None, balancing=True):
        """Wait until notified or until a timeout occurs.

If the calling thread has not acquired the lock when this method is
        called, a RuntimeError is raised.

This method releases the underlying lock, and then blocks until it is
        awakened by a notify() or notifyAll() call for the same condition
        variable in another thread, or until the optional timeout occurs. Once
        awakened or timed out, it re-acquires the lock and returns.

When the timeout argument is present and not None, it should be a
        floating point number specifying a timeout for the operation in seconds
        (or fractions thereof).

When the underlying lock is an RLock, it is not released using its
        release() method, since this may not actually unlock the lock when it
        was acquired multiple times recursively. Instead, an internal interface
        of the RLock class is used, which really unlocks it even when it has
        been recursively acquired several times. Another internal interface is
        then used to restore the recursion level when the lock is reacquired.

"""
        if not self._is_owned():
            raise RuntimeError("cannot wait on un-acquired lock")
        waiter = _allocate_lock()
        waiter.acquire()
        self.__waiters.append(waiter)
        saved_state = self._release_save()
        try:    # restore state no matter what (e.g., KeyboardInterrupt)
            if timeout is None:
                waiter.acquire()
                if __debug__:
                    self._note("%s.wait(): got it", self)
            else:
                # Balancing act:  We can't afford a pure busy loop, so we
                # have to sleep; but if we sleep the whole timeout time,
                # we'll be unresponsive.  The scheme here sleeps very
                # little at first, longer as time goes on, but never longer
                # than 20 times per second (or the timeout time remaining).
                endtime = _time() + timeout
                delay = 0.0005 # 500 us -> initial delay of 1 ms
                while True:
                    gotit = waiter.acquire(0)
                    if gotit:
                        break
                    remaining = min(endtime - _time(), timeout)
                    if remaining <= 0:
                        break
                    if balancing:
                        delay = min(delay * 2, remaining, 0.05)
                    else:
                        delay = remaining
                        endtime = _time() + remaining
                    _sleep(delay)
                if not gotit:
                    if __debug__:
                        self._note("%s.wait(%s): timed out", self, timeout)
                    try:
                        self.__waiters.remove(waiter)
                    except ValueError:
                        pass
                else:
                    if __debug__:
                        self._note("%s.wait(%s): got it", self, timeout)
        finally:
            self._acquire_restore(saved_state)

def notify(self, n=1):
        """Wake up one or more threads waiting on this condition, if any.

If the calling thread has not acquired the lock when this method is
        called, a RuntimeError is raised.

This method wakes up at most n of the threads waiting for the condition
        variable; it is a no-op if no threads are waiting.

"""
        if not self._is_owned():
            raise RuntimeError("cannot notify on un-acquired lock")
        __waiters = self.__waiters
        waiters = __waiters[:n]
        if not waiters:
            if __debug__:
                self._note("%s.notify(): no waiters", self)
            return
        self._note("%s.notify(): notifying %d waiter%s", self, n,
                   n!=1 and "s" or "")
        for waiter in waiters:
            waiter.release()
            try:
                __waiters.remove(waiter)
            except ValueError:
                pass

def notifyAll(self):
        """Wake up all threads waiting on this condition.

If the calling thread has not acquired the lock when this method
        is called, a RuntimeError is raised.

"""
        self.notify(len(self.__waiters))

notify_all = notifyAll

def Semaphore(*args, **kwargs):
    """A factory function that returns a new semaphore.

Semaphores manage a counter representing the number of release() calls minus
    the number of acquire() calls, plus an initial value. The acquire() method
    blocks if necessary until it can return without making the counter
    negative. If not given, value defaults to 1.

"""
    return _Semaphore(*args, **kwargs)

class _Semaphore(_Verbose):
    """Semaphores manage a counter representing the number of release() calls
       minus the number of acquire() calls, plus an initial value. The acquire()
       method blocks if necessary until it can return without making the counter
       negative. If not given, value defaults to 1.

"""

# After Tim Peters' semaphore class, but not quite the same (no maximum)

def __init__(self, value=1, verbose=None):
        if value < 0:
            raise ValueError("semaphore initial value must be >= 0")
        _Verbose.__init__(self, verbose)
        self.__cond = Condition(Lock())
        self.__value = value

def acquire(self, blocking=1):
        """Acquire a semaphore, decrementing the internal counter by one.

When invoked without arguments: if the internal counter is larger than
        zero on entry, decrement it by one and return immediately. If it is zero
        on entry, block, waiting until some other thread has called release() to
        make it larger than zero. This is done with proper interlocking so that
        if multiple acquire() calls are blocked, release() will wake exactly one
        of them up. The implementation may pick one at random, so the order in
        which blocked threads are awakened should not be relied on. There is no
        return value in this case.

When invoked with blocking set to true, do the same thing as when called
        without arguments, and return true.

When invoked with blocking set to false, do not block. If a call without
        an argument would block, return false immediately; otherwise, do the
        same thing as when called without arguments, and return true.

"""
        rc = False
        with self.__cond:
            while self.__value == 0:
                if not blocking:
                    break
                if __debug__:
                    self._note("%s.acquire(%s): blocked waiting, value=%s",
                            self, blocking, self.__value)
                self.__cond.wait()
            else:
                self.__value = self.__value - 1
                if __debug__:
                    self._note("%s.acquire: success, value=%s",
                            self, self.__value)
                rc = True
        return rc

__enter__ = acquire

def release(self):
        """Release a semaphore, incrementing the internal counter by one.

When the counter is zero on entry and another thread is waiting for it
        to become larger than zero again, wake up that thread.

"""
        with self.__cond:
            self.__value = self.__value + 1
            if __debug__:
                self._note("%s.release: success, value=%s",
                        self, self.__value)
            self.__cond.notify()

def __exit__(self, t, v, tb):
        self.release()

def BoundedSemaphore(*args, **kwargs):
    """A factory function that returns a new bounded semaphore.

A bounded semaphore checks to make sure its current value doesn't exceed its
    initial value. If it does, ValueError is raised. In most situations
    semaphores are used to guard resources with limited capacity.

If the semaphore is released too many times it's a sign of a bug. If not
    given, value defaults to 1.

Like regular semaphores, bounded semaphores manage a counter representing
    the number of release() calls minus the number of acquire() calls, plus an
    initial value. The acquire() method blocks if necessary until it can return
    without making the counter negative. If not given, value defaults to 1.

"""
    return _BoundedSemaphore(*args, **kwargs)

class _BoundedSemaphore(_Semaphore):
    """A bounded semaphore checks to make sure its current value doesn't exceed
       its initial value. If it does, ValueError is raised. In most situations
       semaphores are used to guard resources with limited capacity.
    """

def __init__(self, value=1, verbose=None):
        _Semaphore.__init__(self, value, verbose)
        self._initial_value = value

def release(self):
        """Release a semaphore, incrementing the internal counter by one.

When the counter is zero on entry and another thread is waiting for it
        to become larger than zero again, wake up that thread.

If the number of releases exceeds the number of acquires,
        raise a ValueError.

"""
        with self._Semaphore__cond:
            if self._Semaphore__value >= self._initial_value:
                raise ValueError("Semaphore released too many times")
            self._Semaphore__value += 1
            self._Semaphore__cond.notify()

def Event(*args, **kwargs):
    """A factory function that returns a new event.

Events manage a flag that can be set to true with the set() method and reset
    to false with the clear() method. The wait() method blocks until the flag is
    true.

"""
    return _Event(*args, **kwargs)

class _Event(_Verbose):
    """A factory function that returns a new event object. An event manages a
       flag that can be set to true with the set() method and reset to false
       with the clear() method. The wait() method blocks until the flag is true.

"""

# After Tim Peters' event class (without is_posted())

def __init__(self, verbose=None):
        _Verbose.__init__(self, verbose)
        self.__cond = Condition(Lock())
        self.__flag = False

def _reset_internal_locks(self):
        # private!  called by Thread._reset_internal_locks by _after_fork()
        self.__cond.__init__(Lock())

def isSet(self):
        'Return true if and only if the internal flag is true.'
        return self.__flag

is_set = isSet

def set(self):
        """Set the internal flag to true.

All threads waiting for the flag to become true are awakened. Threads
        that call wait() once the flag is true will not block at all.

"""
        with self.__cond:
            self.__flag = True
            self.__cond.notify_all()

def clear(self):
        """Reset the internal flag to false.

Subsequently, threads calling wait() will block until set() is called to
        set the internal flag to true again.

"""
        with self.__cond:
            self.__flag = False

def wait(self, timeout=None, balancing=True):
        """Block until the internal flag is true.

If the internal flag is true on entry, return immediately. Otherwise,
        block until another thread calls set() to set the flag to true, or until
        the optional timeout occurs.

When the timeout argument is present and not None, it should be a
        floating point number specifying a timeout for the operation in seconds
        (or fractions thereof).

This method returns the internal flag on exit, so it will always return
        True except if a timeout is given and the operation times out.

"""
        with self.__cond:
            if not self.__flag:
                self.__cond.wait(timeout, balancing)
            return self.__flag

# Helper to generate new thread names
_counter = _count().next
_counter() # Consume 0 so first non-main thread has id 1.
def _newname(template="Thread-%d"):
    return template % _counter()

# Active thread administration
_active_limbo_lock = _allocate_lock()
_active = {}    # maps thread id to Thread object
_limbo = {}

# Main class for threads

class Thread(_Verbose):
    """A class that represents a thread of control.

This class can be safely subclassed in a limited fashion.

"""
    __initialized = False
    # Need to store a reference to sys.exc_info for printing
    # out exceptions when a thread tries to use a global var. during interp.
    # shutdown and thus raises an exception about trying to perform some
    # operation on/with a NoneType
    __exc_info = _sys.exc_info
    # Keep sys.exc_clear too to clear the exception just before
    # allowing .join() to return.
    __exc_clear = _sys.exc_clear

def __init__(self, group=None, target=None, name=None,
                 args=(), kwargs=None, verbose=None):
        """This constructor should always be called with keyword arguments. Arguments are:

*group* should be None; reserved for future extension when a ThreadGroup
        class is implemented.

*target* is the callable object to be invoked by the run()
        method. Defaults to None, meaning nothing is called.

*name* is the thread name. By default, a unique name is constructed of
        the form "Thread-N" where N is a small decimal number.

*args* is the argument tuple for the target invocation. Defaults to ().

*kwargs* is a dictionary of keyword arguments for the target
        invocation. Defaults to {}.

If a subclass overrides the constructor, it must make sure to invoke
        the base class constructor (Thread.__init__()) before doing anything
        else to the thread.

"""
        assert group is None, "group argument must be None for now"
        _Verbose.__init__(self, verbose)
        if kwargs is None:
            kwargs = {}
        self.__target = target
        self.__name = str(name or _newname())
        self.__args = args
        self.__kwargs = kwargs
        self.__daemonic = self._set_daemon()
        self.__ident = None
        self.__started = Event()
        self.__stopped = False
        self.__block = Condition(Lock())
        self.__initialized = True
        # sys.stderr is not stored in the class like
        # sys.exc_info since it can be changed between instances
        self.__stderr = _sys.stderr

def _reset_internal_locks(self):
        # private!  Called by _after_fork() to reset our internal locks as
        # they may be in an invalid state leading to a deadlock or crash.
        if hasattr(self, '_Thread__block'):  # DummyThread deletes self.__block
            self.__block.__init__()
        self.__started._reset_internal_locks()

@property
    def _block(self):
        # used by a unittest
        return self.__block

def _set_daemon(self):
        # Overridden in _MainThread and _DummyThread
        return current_thread().daemon

def __repr__(self):
        assert self.__initialized, "Thread.__init__() was not called"
        status = "initial"
        if self.__started.is_set():
            status = "started"
        if self.__stopped:
            status = "stopped"
        if self.__daemonic:
            status += " daemon"
        if self.__ident is not None:
            status += " %s" % self.__ident
        return "<%s(%s, %s)>" % (self.__class__.__name__, self.__name, status)

def start(self):
        """Start the thread's activity.

It must be called at most once per thread object. It arranges for the
        object's run() method to be invoked in a separate thread of control.

This method will raise a RuntimeError if called more than once on the
        same thread object.

"""
        if not self.__initialized:
            raise RuntimeError("thread.__init__() not called")
        if self.__started.is_set():
            raise RuntimeError("threads can only be started once")
        if __debug__:
            self._note("%s.start(): starting thread", self)
        with _active_limbo_lock:
            _limbo[self] = self
        try:
            _start_new_thread(self.__bootstrap, ())
        except Exception:
            with _active_limbo_lock:
                del _limbo[self]
            raise
        self.__started.wait()

def run(self):
        """Method representing the thread's activity.

You may override this method in a subclass. The standard run() method
        invokes the callable object passed to the object's constructor as the
        target argument, if any, with sequential and keyword arguments taken
        from the args and kwargs arguments, respectively.

"""
        try:
            if self.__target:
                self.__target(*self.__args, **self.__kwargs)
        finally:
            # Avoid a refcycle if the thread is running a function with
            # an argument that has a member that points to the thread.
            del self.__target, self.__args, self.__kwargs

def __bootstrap(self):
        # Wrapper around the real bootstrap code that ignores
        # exceptions during interpreter cleanup.  Those typically
        # happen when a daemon thread wakes up at an unfortunate
        # moment, finds the world around it destroyed, and raises some
        # random exception *** while trying to report the exception in
        # __bootstrap_inner() below ***.  Those random exceptions
        # don't help anybody, and they confuse users, so we suppress
        # them.  We suppress them only when it appears that the world
        # indeed has already been destroyed, so that exceptions in
        # __bootstrap_inner() during normal business hours are properly
        # reported.  Also, we only suppress them for daemonic threads;
        # if a non-daemonic encounters this, something else is wrong.
        try:
            self.__bootstrap_inner()
        except:
            if self.__daemonic and _sys is None:
                return
            raise

def _set_ident(self):
        self.__ident = _get_ident()

def __bootstrap_inner(self):
        try:
            self._set_ident()
            self.__started.set()
            with _active_limbo_lock:
                _active[self.__ident] = self
                del _limbo[self]
            if __debug__:
                self._note("%s.__bootstrap(): thread started", self)

if _trace_hook:
                self._note("%s.__bootstrap(): registering trace hook", self)
                _sys.settrace(_trace_hook)
            if _profile_hook:
                self._note("%s.__bootstrap(): registering profile hook", self)
                _sys.setprofile(_profile_hook)

try:
                self.run()
            except SystemExit:
                if __debug__:
                    self._note("%s.__bootstrap(): raised SystemExit", self)
            except:
                if __debug__:
                    self._note("%s.__bootstrap(): unhandled exception", self)
                # If sys.stderr is no more (most likely from interpreter
                # shutdown) use self.__stderr.  Otherwise still use sys (as in
                # _sys) in case sys.stderr was redefined since the creation of
                # self.
                if _sys and _sys.stderr is not None:
                    print>>_sys.stderr, ("Exception in thread %s:\n%s" %
                                         (self.name, _format_exc()))
                elif self.__stderr is not None:
                    # Do the best job possible w/o a huge amt. of code to
                    # approximate a traceback (code ideas from
                    # Lib/traceback.py)
                    exc_type, exc_value, exc_tb = self.__exc_info()
                    try:
                        print>>self.__stderr, (
                            "Exception in thread " + self.name +
                            " (most likely raised during interpreter shutdown):")
                        print>>self.__stderr, (
                            "Traceback (most recent call last):")
                        while exc_tb:
                            print>>self.__stderr, (
                                '  File "%s", line %s, in %s' %
                                (exc_tb.tb_frame.f_code.co_filename,
                                    exc_tb.tb_lineno,
                                    exc_tb.tb_frame.f_code.co_name))
                            exc_tb = exc_tb.tb_next
                        print>>self.__stderr, ("%s: %s" % (exc_type, exc_value))
                    # Make sure that exc_tb gets deleted since it is a memory
                    # hog; deleting everything else is just for thoroughness
                    finally:
                        del exc_type, exc_value, exc_tb
            else:
                if __debug__:
                    self._note("%s.__bootstrap(): normal return", self)
            finally:
                # Prevent a race in
                # test_threading.test_no_refcycle_through_target when
                # the exception keeps the target alive past when we
                # assert that it's dead.
                self.__exc_clear()
        finally:
            with _active_limbo_lock:
                self.__stop()
                try:
                    # We don't call self.__delete() because it also
                    # grabs _active_limbo_lock.
                    del _active[_get_ident()]
                except:
                    pass

def __stop(self):
        # DummyThreads delete self.__block, but they have no waiters to
        # notify anyway (join() is forbidden on them).
        if not hasattr(self, '_Thread__block'):
            return
        self.__block.acquire()
        self.__stopped = True
        self.__block.notify_all()
        self.__block.release()

def __delete(self):
        "Remove current thread from the dict of currently running threads."

# Notes about running with dummy_thread:
        #
        # Must take care to not raise an exception if dummy_thread is being
        # used (and thus this module is being used as an instance of
        # dummy_threading).  dummy_thread.get_ident() always returns -1 since
        # there is only one thread if dummy_thread is being used.  Thus
        # len(_active) is always <= 1 here, and any Thread instance created
        # overwrites the (if any) thread currently registered in _active.
        #
        # An instance of _MainThread is always created by 'threading'.  This
        # gets overwritten the instant an instance of Thread is created; both
        # threads return -1 from dummy_thread.get_ident() and thus have the
        # same key in the dict.  So when the _MainThread instance created by
        # 'threading' tries to clean itself up when atexit calls this method
        # it gets a KeyError if another Thread instance was created.
        #
        # This all means that KeyError from trying to delete something from
        # _active if dummy_threading is being used is a red herring.  But
        # since it isn't if dummy_threading is *not* being used then don't
        # hide the exception.

try:
            with _active_limbo_lock:
                del _active[_get_ident()]
                # There must not be any python code between the previous line
                # and after the lock is released.  Otherwise a tracing function
                # could try to acquire the lock again in the same thread, (in
                # current_thread()), and would block.
        except KeyError:
            if 'dummy_threading' not in _sys.modules:
                raise

def join(self, timeout=None, balancing=True):
        """Wait until the thread terminates.

This blocks the calling thread until the thread whose join() method is
        called terminates -- either normally or through an unhandled exception
        or until the optional timeout occurs.

When the timeout argument is present and not None, it should be a
        floating point number specifying a timeout for the operation in seconds
        (or fractions thereof). As join() always returns None, you must call
        isAlive() after join() to decide whether a timeout happened -- if the
        thread is still alive, the join() call timed out.

When the timeout argument is not present or None, the operation will
        block until the thread terminates.

A thread can be join()ed many times.

join() raises a RuntimeError if an attempt is made to join the current
        thread as that would cause a deadlock. It is also an error to join() a
        thread before it has been started and attempts to do so raises the same
        exception.

"""
        if not self.__initialized:
            raise RuntimeError("Thread.__init__() not called")
        if not self.__started.is_set():
            raise RuntimeError("cannot join thread before it is started")
        if self is current_thread():
            raise RuntimeError("cannot join current thread")

if __debug__:
            if not self.__stopped:
                self._note("%s.join(): waiting until thread stops", self)
        self.__block.acquire()
        try:
            if timeout is None:
                while not self.__stopped:
                    self.__block.wait()
                if __debug__:
                    self._note("%s.join(): thread stopped", self)
            else:
                deadline = _time() + timeout
                while not self.__stopped:
                    delay = deadline - _time()
                    if delay <= 0:
                        if __debug__:
                            self._note("%s.join(): timed out", self)
                        break
                    self.__block.wait(delay, balancing)
                else:
                    if __debug__:
                        self._note("%s.join(): thread stopped", self)
        finally:
            self.__block.release()

@property
    def name(self):
        """A string used for identification purposes only.

It has no semantics. Multiple threads may be given the same name. The
        initial name is set by the constructor.

"""
        assert self.__initialized, "Thread.__init__() not called"
        return self.__name

@name.setter
    def name(self, name):
        assert self.__initialized, "Thread.__init__() not called"
        self.__name = str(name)

@property
    def ident(self):
        """Thread identifier of this thread or None if it has not been started.

This is a nonzero integer. See the thread.get_ident() function. Thread
        identifiers may be recycled when a thread exits and another thread is
        created. The identifier is available even after the thread has exited.

"""
        assert self.__initialized, "Thread.__init__() not called"
        return self.__ident

def isAlive(self):
        """Return whether the thread is alive.

This method returns True just before the run() method starts until just
        after the run() method terminates. The module function enumerate()
        returns a list of all alive threads.

"""
        assert self.__initialized, "Thread.__init__() not called"
        return self.__started.is_set() and not self.__stopped

is_alive = isAlive

@property
    def daemon(self):
        """A boolean value indicating whether this thread is a daemon thread (True) or not (False).

This must be set before start() is called, otherwise RuntimeError is
        raised. Its initial value is inherited from the creating thread; the
        main thread is not a daemon thread and therefore all threads created in
        the main thread default to daemon = False.

The entire Python program exits when only daemon threads are left.

"""
        assert self.__initialized, "Thread.__init__() not called"
        return self.__daemonic

@daemon.setter
    def daemon(self, daemonic):
        if not self.__initialized:
            raise RuntimeError("Thread.__init__() not called")
        if self.__started.is_set():
            raise RuntimeError("cannot set daemon status of active thread");
        self.__daemonic = daemonic

def isDaemon(self):
        return self.daemon

def setDaemon(self, daemonic):
        self.daemon = daemonic

def getName(self):
        return self.name

def setName(self, name):
        self.name = name

# The timer class was contributed by Itamar Shtull-Trauring

def Timer(*args, **kwargs):
    """Factory function to create a Timer object.

Timers call a function after a specified number of seconds:

t = Timer(30.0, f, args=[], kwargs={})
        t.start()
        t.cancel()     # stop the timer's action if it's still waiting

"""
    return _Timer(*args, **kwargs)

class _Timer(Thread):
    """Call a function after a specified number of seconds:

t = Timer(30.0, f, args=[], kwargs={})
            t.start()
            t.cancel()     # stop the timer's action if it's still waiting

"""

def __init__(self, interval, function, args=[], kwargs={}):
        Thread.__init__(self)
        self.interval = interval
        self.function = function
        self.args = args
        self.kwargs = kwargs
        self.finished = Event()

def cancel(self):
        """Stop the timer if it hasn't finished yet"""
        self.finished.set()

def run(self):
        self.finished.wait(self.interval)
        if not self.finished.is_set():
            self.function(*self.args, **self.kwargs)
        self.finished.set()

# Special thread class to represent the main thread
# This is garbage collected through an exit handler

class _MainThread(Thread):

def __init__(self):
        Thread.__init__(self, name="MainThread")
        self._Thread__started.set()
        self._set_ident()
        with _active_limbo_lock:
            _active[_get_ident()] = self

def _set_daemon(self):
        return False

def _exitfunc(self):
        self._Thread__stop()
        t = _pickSomeNonDaemonThread()
        if t:
            if __debug__:
                self._note("%s: waiting for other threads", self)
        while t:
            t.join()
            t = _pickSomeNonDaemonThread()
        if __debug__:
            self._note("%s: exiting", self)
        self._Thread__delete()

def _pickSomeNonDaemonThread():
    for t in enumerate():
        if not t.daemon and t.is_alive():
            return t
    return None

# Dummy thread class to represent threads not started here.
# These aren't garbage collected when they die, nor can they be waited for.
# If they invoke anything in threading.py that calls current_thread(), they
# leave an entry in the _active dict forever after.
# Their purpose is to return *something* from current_thread().
# They are marked as daemon threads so we won't wait for them
# when we exit (conform previous semantics).

class _DummyThread(Thread):

def __init__(self):
        Thread.__init__(self, name=_newname("Dummy-%d"))

# Thread.__block consumes an OS-level locking primitive, which
        # can never be used by a _DummyThread.  Since a _DummyThread
        # instance is immortal, that's bad, so release this resource.
        del self._Thread__block

self._Thread__started.set()
        self._set_ident()
        with _active_limbo_lock:
            _active[_get_ident()] = self

def _set_daemon(self):
        return True

def join(self, timeout=None, balancing=True):
        assert False, "cannot join a dummy thread"

# Global API functions

def currentThread():
    """Return the current Thread object, corresponding to the caller's thread of control.

If the caller's thread of control was not created through the threading
    module, a dummy thread object with limited functionality is returned.

"""
    try:
        return _active[_get_ident()]
    except KeyError:
        ##print "current_thread(): no current thread for", _get_ident()
        return _DummyThread()

current_thread = currentThread

def activeCount():
    """Return the number of Thread objects currently alive.

The returned count is equal to the length of the list returned by
    enumerate().

"""
    with _active_limbo_lock:
        return len(_active) + len(_limbo)

active_count = activeCount

def _enumerate():
    # Same as enumerate(), but without the lock. Internal use only.
    return _active.values() + _limbo.values()

def enumerate():
    """Return a list of all Thread objects currently alive.

The list includes daemonic threads, dummy thread objects created by
    current_thread(), and the main thread. It excludes terminated threads and
    threads that have not yet been started.

"""
    with _active_limbo_lock:
        return _active.values() + _limbo.values()

from thread import stack_size

# Create the main thread object,
# and make it available for the interpreter
# (Py_Main) as threading._shutdown.

_shutdown = _MainThread()._exitfunc

# get thread-local implementation, either from the thread
# module, or from the python fallback

try:
    from thread import _local as local
except ImportError:
    from _threading_local import local

def _after_fork():
    # This function is called by Python/ceval.c:PyEval_ReInitThreads which
    # is called from PyOS_AfterFork.  Here we cleanup threading module state
    # that should not exist after a fork.

# Reset _active_limbo_lock, in case we forked while the lock was held
    # by another (non-forked) thread.  http://bugs.python.org/issue874900
    global _active_limbo_lock
    _active_limbo_lock = _allocate_lock()

# fork() only copied the current thread; clear references to others.
    new_active = {}
    current = current_thread()
    with _active_limbo_lock:
        for thread in _enumerate():
            # Any lock/condition variable may be currently locked or in an
            # invalid state, so we reinitialize them.
            if hasattr(thread, '_reset_internal_locks'):
                thread._reset_internal_locks()
            if thread is current:
                # There is only one active thread. We reset the ident to
                # its new value since it can have changed.
                ident = _get_ident()
                thread._Thread__ident = ident
                new_active[ident] = thread
            else:
                # All the others are already stopped.
                thread._Thread__stop()

_limbo.clear()
        _active.clear()
        _active.update(new_active)
        assert len(_active) == 1

# Self-test code

def _test():

class BoundedQueue(_Verbose):

def __init__(self, limit):
            _Verbose.__init__(self)
            self.mon = RLock()
            self.rc = Condition(self.mon)
            self.wc = Condition(self.mon)
            self.limit = limit
            self.queue = _deque()

def put(self, item):
            self.mon.acquire()
            while len(self.queue) >= self.limit:
                self._note("put(%s): queue full", item)
                self.wc.wait()
            self.queue.append(item)
            self._note("put(%s): appended, length now %d",
                       item, len(self.queue))
            self.rc.notify()
            self.mon.release()

def get(self):
            self.mon.acquire()
            while not self.queue:
                self._note("get(): queue empty")
                self.rc.wait()
            item = self.queue.popleft()
            self._note("get(): got %s, %d left", item, len(self.queue))
            self.wc.notify()
            self.mon.release()
            return item

class ProducerThread(Thread):

def __init__(self, queue, quota):
            Thread.__init__(self, name="Producer")
            self.queue = queue
            self.quota = quota

def run(self):
            from random import random
            counter = 0
            while counter < self.quota:
                counter = counter + 1
                self.queue.put("%s.%d" % (self.name, counter))
                _sleep(random() * 0.00001)

class ConsumerThread(Thread):

def __init__(self, queue, count):
            Thread.__init__(self, name="Consumer")
            self.queue = queue
            self.count = count

def run(self):
            while self.count > 0:
                item = self.queue.get()
                print item
                self.count = self.count - 1

NP = 3
    QL = 4
    NI = 5

Q = BoundedQueue(QL)
    P = []
    for i in range(NP):
        t = ProducerThread(Q, NI)
        t.name = ("Producer-%d" % (i+1))
        P.append(t)
    C = ConsumerThread(Q, NI*NP)
    for t in P:
        t.start()
        _sleep(0.000001)
    C.start()
    for t in P:
        t.join()
    C.join()

if __name__ == '__main__':
    _test()

cmd: