FM / python2.7

/usr/lib64/python2.7

Name	Size	Mode	Actions
bsddb/	-	0755	rm
compiler/	-	0755	rm
config/	-	0755	rm
ctypes/	-	0755	rm
curses/	-	0755	rm
distutils/	-	0755	rm
email/	-	0755	rm
encodings/	-	0755	rm
ensurepip/	-	0755	rm
hotshot/	-	0755	rm
idlelib/	-	0755	rm
importlib/	-	0755	rm
json/	-	0755	rm
lib-dynload/	-	0755	rm
lib2to3/	-	0755	rm
logging/	-	0755	rm
multiprocessing/	-	0755	rm
plat-linux2/	-	0755	rm
pydoc_data/	-	0755	rm
site-packages/	-	0755	rm
sqlite3/	-	0755	rm
test/	-	0755	rm
unittest/	-	0755	rm
wsgiref/	-	0755	rm
xml/	-	0755	rm
abc.py	7145	0644	edit dl rm
abc.pyc	6143	0644	edit dl rm
abc.pyo	6087	0644	edit dl rm
aifc.py	34579	0644	edit dl rm
aifc.pyc	30459	0644	edit dl rm
aifc.pyo	30459	0644	edit dl rm
antigravity.py	60	0644	edit dl rm
antigravity.pyc	203	0644	edit dl rm
antigravity.pyo	203	0644	edit dl rm
anydbm.py	2663	0644	edit dl rm
anydbm.pyc	2800	0644	edit dl rm
anydbm.pyo	2800	0644	edit dl rm
argparse.py	89228	0644	edit dl rm
argparse.pyc	64367	0644	edit dl rm
argparse.pyo	64202	0644	edit dl rm
ast.py	11805	0644	edit dl rm
ast.pyc	12938	0644	edit dl rm
ast.pyo	12938	0644	edit dl rm
asynchat.py	11581	0644	edit dl rm
asynchat.pyc	8810	0644	edit dl rm
asynchat.pyo	8810	0644	edit dl rm
asyncore.py	20943	0644	edit dl rm
asyncore.pyc	18893	0644	edit dl rm
asyncore.pyo	18893	0644	edit dl rm
atexit.py	1705	0644	edit dl rm
atexit.pyc	2203	0644	edit dl rm
atexit.pyo	2203	0644	edit dl rm
audiodev.py	7597	0644	edit dl rm
audiodev.pyc	8469	0644	edit dl rm
audiodev.pyo	8469	0644	edit dl rm
base64.py	11806	0755	edit dl rm
base64.pyc	11297	0644	edit dl rm
base64.pyo	11297	0644	edit dl rm
BaseHTTPServer.py	22747	0644	edit dl rm
BaseHTTPServer.pyc	21722	0644	edit dl rm
BaseHTTPServer.pyo	21722	0644	edit dl rm
Bastion.py	5744	0644	edit dl rm
Bastion.pyc	6660	0644	edit dl rm
Bastion.pyo	6660	0644	edit dl rm
bdb.py	21714	0644	edit dl rm
bdb.pyc	19101	0644	edit dl rm
bdb.pyo	19101	0644	edit dl rm
binhex.py	14698	0644	edit dl rm
binhex.pyc	15460	0644	edit dl rm
binhex.pyo	15460	0644	edit dl rm
bisect.py	2595	0644	edit dl rm
bisect.pyc	3071	0644	edit dl rm
bisect.pyo	3071	0644	edit dl rm
calendar.py	23384	0644	edit dl rm
calendar.pyc	27913	0644	edit dl rm
calendar.pyo	27913	0644	edit dl rm
cgi.py	36308	0755	edit dl rm
cgi.pyc	33366	0644	edit dl rm
cgi.pyo	33366	0644	edit dl rm
CGIHTTPServer.py	13089	0644	edit dl rm
CGIHTTPServer.pyc	11018	0644	edit dl rm
CGIHTTPServer.pyo	11018	0644	edit dl rm
cgitb.py	12175	0644	edit dl rm
cgitb.pyc	12138	0644	edit dl rm
cgitb.pyo	12138	0644	edit dl rm
chunk.py	5419	0644	edit dl rm
chunk.pyc	5602	0644	edit dl rm
chunk.pyo	5602	0644	edit dl rm
cmd.py	15026	0644	edit dl rm
cmd.pyc	14039	0644	edit dl rm
cmd.pyo	14039	0644	edit dl rm
code.py	10189	0644	edit dl rm
code.pyc	10334	0644	edit dl rm
code.pyo	10334	0644	edit dl rm
codecs.py	36143	0644	edit dl rm
codecs.pyc	36824	0644	edit dl rm
codecs.pyo	36824	0644	edit dl rm
codeop.py	5999	0644	edit dl rm
codeop.pyc	6597	0644	edit dl rm
codeop.pyo	6597	0644	edit dl rm
collections.py	27798	0644	edit dl rm
collections.pyc	26163	0644	edit dl rm
collections.pyo	26112	0644	edit dl rm
colorsys.py	3691	0644	edit dl rm
colorsys.pyc	3991	0644	edit dl rm
colorsys.pyo	3991	0644	edit dl rm
commands.py	2545	0644	edit dl rm
commands.pyc	2469	0644	edit dl rm
commands.pyo	2469	0644	edit dl rm
compileall.py	7763	0644	edit dl rm
compileall.pyc	7017	0644	edit dl rm
compileall.pyo	7017	0644	edit dl rm
ConfigParser.py	27746	0644	edit dl rm
ConfigParser.pyc	25213	0644	edit dl rm
ConfigParser.pyo	25213	0644	edit dl rm
contextlib.py	4424	0644	edit dl rm
contextlib.pyc	4454	0644	edit dl rm
contextlib.pyo	4454	0644	edit dl rm
Cookie.py	26538	0644	edit dl rm
Cookie.pyc	22658	0644	edit dl rm
Cookie.pyo	22658	0644	edit dl rm
cookielib.py	65486	0644	edit dl rm
cookielib.pyc	54725	0644	edit dl rm
cookielib.pyo	54537	0644	edit dl rm
copy.py	11533	0644	edit dl rm
copy.pyc	12170	0644	edit dl rm
copy.pyo	12078	0644	edit dl rm
copy_reg.py	6974	0644	edit dl rm
copy_reg.pyc	5167	0644	edit dl rm
copy_reg.pyo	5123	0644	edit dl rm
cProfile.py	6573	0755	edit dl rm
cProfile.pyc	6395	0644	edit dl rm
cProfile.pyo	6395	0644	edit dl rm
crypt.py	2292	0644	edit dl rm
crypt.pyc	2960	0644	edit dl rm
crypt.pyo	2960	0644	edit dl rm
csv.py	16708	0644	edit dl rm
csv.pyc	13507	0644	edit dl rm
csv.pyo	13507	0644	edit dl rm
dbhash.py	498	0644	edit dl rm
dbhash.pyc	718	0644	edit dl rm
dbhash.pyo	718	0644	edit dl rm
decimal.py	221933	0644	edit dl rm
decimal.pyc	172155	0644	edit dl rm
decimal.pyo	172155	0644	edit dl rm
difflib.py	82325	0644	edit dl rm
difflib.pyc	61898	0644	edit dl rm
difflib.pyo	61847	0644	edit dl rm
dircache.py	1126	0644	edit dl rm
dircache.pyc	1576	0644	edit dl rm
dircache.pyo	1576	0644	edit dl rm
dis.py	6499	0644	edit dl rm
dis.pyc	6228	0644	edit dl rm
dis.pyo	6228	0644	edit dl rm
doctest.py	105095	0644	edit dl rm
doctest.pyc	83637	0644	edit dl rm
doctest.pyo	83350	0644	edit dl rm
DocXMLRPCServer.py	10768	0644	edit dl rm
DocXMLRPCServer.pyc	10195	0644	edit dl rm
DocXMLRPCServer.pyo	10086	0644	edit dl rm
dumbdbm.py	9141	0644	edit dl rm
dumbdbm.pyc	6746	0644	edit dl rm
dumbdbm.pyo	6746	0644	edit dl rm
dummy_thread.py	4418	0644	edit dl rm
dummy_thread.pyc	5394	0644	edit dl rm
dummy_thread.pyo	5394	0644	edit dl rm
dummy_threading.py	2804	0644	edit dl rm
dummy_threading.pyc	1285	0644	edit dl rm
dummy_threading.pyo	1285	0644	edit dl rm
filecmp.py	9588	0644	edit dl rm
filecmp.pyc	9622	0644	edit dl rm
filecmp.pyo	9622	0644	edit dl rm
fileinput.py	13746	0644	edit dl rm
fileinput.pyc	14500	0644	edit dl rm
fileinput.pyo	14500	0644	edit dl rm
fnmatch.py	3315	0644	edit dl rm
fnmatch.pyc	3614	0644	edit dl rm
fnmatch.pyo	3614	0644	edit dl rm
formatter.py	14911	0644	edit dl rm
formatter.pyc	19178	0644	edit dl rm
formatter.pyo	19178	0644	edit dl rm
fpformat.py	4732	0644	edit dl rm
fpformat.pyc	4703	0644	edit dl rm
fpformat.pyo	4703	0644	edit dl rm
fractions.py	22390	0644	edit dl rm
fractions.pyc	19711	0644	edit dl rm
fractions.pyo	19711	0644	edit dl rm
ftplib.py	38555	0644	edit dl rm
ftplib.pyc	34939	0644	edit dl rm
ftplib.pyo	34939	0644	edit dl rm
functools.py	4806	0644	edit dl rm
functools.pyc	6629	0644	edit dl rm
functools.pyo	6629	0644	edit dl rm
genericpath.py	3201	0644	edit dl rm
genericpath.pyc	3517	0644	edit dl rm
genericpath.pyo	3517	0644	edit dl rm
getopt.py	7319	0644	edit dl rm
getopt.pyc	6654	0644	edit dl rm
getopt.pyo	6609	0644	edit dl rm
getpass.py	5563	0644	edit dl rm
getpass.pyc	4744	0644	edit dl rm
getpass.pyo	4744	0644	edit dl rm
gettext.py	22666	0644	edit dl rm
gettext.pyc	18004	0644	edit dl rm
gettext.pyo	18004	0644	edit dl rm
glob.py	3114	0644	edit dl rm
glob.pyc	2943	0644	edit dl rm
glob.pyo	2943	0644	edit dl rm
gzip.py	19028	0644	edit dl rm
gzip.pyc	15236	0644	edit dl rm
gzip.pyo	15236	0644	edit dl rm
hashlib.py	7841	0644	edit dl rm
hashlib.pyc	6919	0644	edit dl rm
hashlib.pyo	6919	0644	edit dl rm
heapq.py	18295	0644	edit dl rm
heapq.pyc	14564	0644	edit dl rm
heapq.pyo	14564	0644	edit dl rm
hmac.py	4588	0644	edit dl rm
hmac.pyc	4542	0644	edit dl rm
hmac.pyo	4542	0644	edit dl rm
htmlentitydefs.py	18056	0644	edit dl rm
htmlentitydefs.pyc	6367	0644	edit dl rm
htmlentitydefs.pyo	6367	0644	edit dl rm
htmllib.py	12869	0644	edit dl rm
htmllib.pyc	20309	0644	edit dl rm
htmllib.pyo	20309	0644	edit dl rm
HTMLParser.py	17171	0644	edit dl rm
HTMLParser.pyc	13727	0644	edit dl rm
HTMLParser.pyo	13422	0644	edit dl rm
httplib.py	53306	0644	edit dl rm
httplib.pyc	38724	0644	edit dl rm
httplib.pyo	38540	0644	edit dl rm
ihooks.py	18986	0644	edit dl rm
ihooks.pyc	21372	0644	edit dl rm
ihooks.pyo	21372	0644	edit dl rm
imaplib.py	48366	0644	edit dl rm
imaplib.pyc	45011	0644	edit dl rm
imaplib.pyo	42310	0644	edit dl rm
imghdr.py	3541	0644	edit dl rm
imghdr.pyc	4838	0644	edit dl rm
imghdr.pyo	4838	0644	edit dl rm
imputil.py	25764	0644	edit dl rm
imputil.pyc	15623	0644	edit dl rm
imputil.pyo	15445	0644	edit dl rm
inspect.py	43008	0644	edit dl rm
inspect.pyc	40229	0644	edit dl rm
inspect.pyo	40229	0644	edit dl rm
io.py	3322	0644	edit dl rm
io.pyc	3589	0644	edit dl rm
io.pyo	3589	0644	edit dl rm
keyword.py	1995	0755	edit dl rm
keyword.pyc	2105	0644	edit dl rm
keyword.pyo	2105	0644	edit dl rm
linecache.py	4027	0644	edit dl rm
linecache.pyc	3272	0644	edit dl rm
linecache.pyo	3272	0644	edit dl rm
locale.py	102834	0644	edit dl rm
locale.pyc	56610	0644	edit dl rm
locale.pyo	56610	0644	edit dl rm
macpath.py	6289	0644	edit dl rm
macpath.pyc	7681	0644	edit dl rm
macpath.pyo	7681	0644	edit dl rm
macurl2path.py	2731	0644	edit dl rm
macurl2path.pyc	2244	0644	edit dl rm
macurl2path.pyo	2244	0644	edit dl rm
mailbox.py	81240	0644	edit dl rm
mailbox.pyc	76717	0644	edit dl rm
mailbox.pyo	76670	0644	edit dl rm
mailcap.py	8404	0644	edit dl rm
mailcap.pyc	7955	0644	edit dl rm
mailcap.pyo	7955	0644	edit dl rm
markupbase.py	14643	0644	edit dl rm
markupbase.pyc	9267	0644	edit dl rm
markupbase.pyo	9071	0644	edit dl rm
md5.py	358	0644	edit dl rm
md5.pyc	378	0644	edit dl rm
md5.pyo	378	0644	edit dl rm
mhlib.py	33434	0644	edit dl rm
mhlib.pyc	33777	0644	edit dl rm
mhlib.pyo	33777	0644	edit dl rm
mimetools.py	7168	0644	edit dl rm
mimetools.pyc	8201	0644	edit dl rm
mimetools.pyo	8201	0644	edit dl rm
mimetypes.py	21028	0644	edit dl rm
mimetypes.pyc	18489	0644	edit dl rm
mimetypes.pyo	18489	0644	edit dl rm
MimeWriter.py	6482	0644	edit dl rm
MimeWriter.pyc	7364	0644	edit dl rm
MimeWriter.pyo	7364	0644	edit dl rm
mimify.py	15020	0755	edit dl rm
mimify.pyc	12001	0644	edit dl rm
mimify.pyo	12001	0644	edit dl rm
modulefinder.py	24461	0644	edit dl rm
modulefinder.pyc	19127	0644	edit dl rm
modulefinder.pyo	19045	0644	edit dl rm
multifile.py	4820	0644	edit dl rm
multifile.pyc	5420	0644	edit dl rm
multifile.pyo	5378	0644	edit dl rm
mutex.py	1878	0644	edit dl rm
mutex.pyc	2516	0644	edit dl rm
mutex.pyo	2516	0644	edit dl rm
netrc.py	5888	0644	edit dl rm
netrc.pyc	4714	0644	edit dl rm
netrc.pyo	4714	0644	edit dl rm
new.py	610	0644	edit dl rm
new.pyc	862	0644	edit dl rm
new.pyo	862	0644	edit dl rm
nntplib.py	21470	0644	edit dl rm
nntplib.pyc	21044	0644	edit dl rm
nntplib.pyo	21044	0644	edit dl rm
ntpath.py	19429	0644	edit dl rm
ntpath.pyc	13129	0644	edit dl rm
ntpath.pyo	13129	0644	edit dl rm
nturl2path.py	2419	0644	edit dl rm
nturl2path.pyc	1815	0644	edit dl rm
nturl2path.pyo	1815	0644	edit dl rm
numbers.py	10319	0644	edit dl rm
numbers.pyc	14012	0644	edit dl rm
numbers.pyo	14012	0644	edit dl rm
opcode.py	5474	0644	edit dl rm
opcode.pyc	6145	0644	edit dl rm
opcode.pyo	6145	0644	edit dl rm
optparse.py	61203	0644	edit dl rm
optparse.pyc	53894	0644	edit dl rm
optparse.pyo	53811	0644	edit dl rm
os.py	25910	0644	edit dl rm
os.pyc	25689	0644	edit dl rm
os.pyo	25689	0644	edit dl rm
os2emxpath.py	4635	0644	edit dl rm
os2emxpath.pyc	4525	0644	edit dl rm
os2emxpath.pyo	4525	0644	edit dl rm
pdb.doc	7914	0644	edit dl rm
pdb.py	46098	0755	edit dl rm
pdb.pyc	43669	0644	edit dl rm
pdb.pyo	43669	0644	edit dl rm
pickle.py	45489	0644	edit dl rm
pickle.pyc	38560	0644	edit dl rm
pickle.pyo	38364	0644	edit dl rm
pickletools.py	74523	0644	edit dl rm
pickletools.pyc	57032	0644	edit dl rm
pickletools.pyo	56171	0644	edit dl rm
pipes.py	9582	0644	edit dl rm
pipes.pyc	9308	0644	edit dl rm
pipes.pyo	9308	0644	edit dl rm
pkgutil.py	20243	0644	edit dl rm
pkgutil.pyc	18959	0644	edit dl rm
pkgutil.pyo	18959	0644	edit dl rm
platform.py	52801	0755	edit dl rm
platform.pyc	37971	0644	edit dl rm
platform.pyo	37971	0644	edit dl rm
plistlib.py	15810	0644	edit dl rm
plistlib.pyc	19963	0644	edit dl rm
plistlib.pyo	19877	0644	edit dl rm
popen2.py	8416	0644	edit dl rm
popen2.pyc	9025	0644	edit dl rm
popen2.pyo	8983	0644	edit dl rm
poplib.py	12824	0644	edit dl rm
poplib.pyc	13345	0644	edit dl rm
poplib.pyo	13345	0644	edit dl rm
posixfile.py	8003	0644	edit dl rm
posixfile.pyc	7652	0644	edit dl rm
posixfile.pyo	7652	0644	edit dl rm
posixpath.py	14293	0644	edit dl rm
posixpath.pyc	11462	0644	edit dl rm
posixpath.pyo	11462	0644	edit dl rm
pprint.py	11777	0644	edit dl rm
pprint.pyc	10194	0644	edit dl rm
pprint.pyo	10017	0644	edit dl rm
profile.py	22781	0755	edit dl rm
profile.pyc	16456	0644	edit dl rm
profile.pyo	16209	0644	edit dl rm
pstats.py	26712	0644	edit dl rm
pstats.pyc	25013	0644	edit dl rm
pstats.pyo	25013	0644	edit dl rm
pty.py	5058	0644	edit dl rm
pty.pyc	4966	0644	edit dl rm
pty.pyo	4966	0644	edit dl rm
pyclbr.py	13388	0644	edit dl rm
pyclbr.pyc	9651	0644	edit dl rm
pyclbr.pyo	9651	0644	edit dl rm
pydoc.py	95739	0755	edit dl rm
pydoc.pyc	92342	0644	edit dl rm
pydoc.pyo	92278	0644	edit dl rm
py_compile.py	5936	0644	edit dl rm
py_compile.pyc	6428	0644	edit dl rm
py_compile.pyo	6428	0644	edit dl rm
Queue.py	8577	0644	edit dl rm
Queue.pyc	9424	0644	edit dl rm
Queue.pyo	9424	0644	edit dl rm
quopri.py	6968	0755	edit dl rm
quopri.pyc	6574	0644	edit dl rm
quopri.pyo	6574	0644	edit dl rm
random.py	32457	0644	edit dl rm
random.pyc	25704	0644	edit dl rm
random.pyo	25704	0644	edit dl rm
re.py	13423	0644	edit dl rm
re.pyc	13413	0644	edit dl rm
re.pyo	13413	0644	edit dl rm
repr.py	4296	0644	edit dl rm
repr.pyc	5385	0644	edit dl rm
repr.pyo	5385	0644	edit dl rm
rexec.py	20148	0644	edit dl rm
rexec.pyc	23807	0644	edit dl rm
rexec.pyo	23807	0644	edit dl rm
rfc822.py	33542	0644	edit dl rm
rfc822.pyc	31813	0644	edit dl rm
rfc822.pyo	31813	0644	edit dl rm
rlcompleter.py	5991	0644	edit dl rm
rlcompleter.pyc	6078	0644	edit dl rm
rlcompleter.pyo	6078	0644	edit dl rm
robotparser.py	7695	0644	edit dl rm
robotparser.pyc	8003	0644	edit dl rm
robotparser.pyo	8003	0644	edit dl rm
runpy.py	11081	0644	edit dl rm
runpy.pyc	8803	0644	edit dl rm
runpy.pyo	8803	0644	edit dl rm
sched.py	5088	0644	edit dl rm
sched.pyc	4994	0644	edit dl rm
sched.pyo	4994	0644	edit dl rm
sets.py	19050	0644	edit dl rm
sets.pyc	16895	0644	edit dl rm
sets.pyo	16895	0644	edit dl rm
sgmllib.py	17884	0644	edit dl rm
sgmllib.pyc	15436	0644	edit dl rm
sgmllib.pyo	15436	0644	edit dl rm
sha.py	393	0644	edit dl rm
sha.pyc	421	0644	edit dl rm
sha.pyo	421	0644	edit dl rm
shelve.py	8178	0644	edit dl rm
shelve.pyc	10256	0644	edit dl rm
shelve.pyo	10256	0644	edit dl rm
shlex.py	11164	0644	edit dl rm
shlex.pyc	7558	0644	edit dl rm
shlex.pyo	7558	0644	edit dl rm
shutil.py	19871	0644	edit dl rm
shutil.pyc	19259	0644	edit dl rm
shutil.pyo	19259	0644	edit dl rm
SimpleHTTPServer.py	7997	0644	edit dl rm
SimpleHTTPServer.pyc	8010	0644	edit dl rm
SimpleHTTPServer.pyo	8010	0644	edit dl rm
SimpleXMLRPCServer.py	25812	0644	edit dl rm
SimpleXMLRPCServer.pyc	22863	0644	edit dl rm
SimpleXMLRPCServer.pyo	22863	0644	edit dl rm
site.py	21296	0644	edit dl rm
site.pyc	20786	0644	edit dl rm
site.pyo	20786	0644	edit dl rm
smtpd.py	18542	0755	edit dl rm
smtpd.pyc	15883	0644	edit dl rm
smtpd.pyo	15883	0644	edit dl rm
smtplib.py	32134	0755	edit dl rm
smtplib.pyc	30304	0644	edit dl rm
smtplib.pyo	30304	0644	edit dl rm
sndhdr.py	5973	0644	edit dl rm
sndhdr.pyc	7361	0644	edit dl rm
sndhdr.pyo	7361	0644	edit dl rm
socket.py	20615	0644	edit dl rm
socket.pyc	16152	0644	edit dl rm
socket.pyo	16066	0644	edit dl rm
SocketServer.py	23948	0644	edit dl rm
SocketServer.pyc	24087	0644	edit dl rm
SocketServer.pyo	24087	0644	edit dl rm
sre.py	384	0644	edit dl rm
sre.pyc	519	0644	edit dl rm
sre.pyo	519	0644	edit dl rm
sre_compile.py	19823	0644	edit dl rm
sre_compile.pyc	12560	0644	edit dl rm
sre_compile.pyo	12404	0644	edit dl rm
sre_constants.py	7197	0644	edit dl rm
sre_constants.pyc	6195	0644	edit dl rm
sre_constants.pyo	6195	0644	edit dl rm
sre_parse.py	30700	0644	edit dl rm
sre_parse.pyc	21156	0644	edit dl rm
sre_parse.pyo	21156	0644	edit dl rm
ssl.py	39310	0644	edit dl rm
ssl.pyc	32716	0644	edit dl rm
ssl.pyo	32716	0644	edit dl rm
stat.py	1842	0644	edit dl rm
stat.pyc	2751	0644	edit dl rm
stat.pyo	2751	0644	edit dl rm
statvfs.py	898	0644	edit dl rm
statvfs.pyc	620	0644	edit dl rm
statvfs.pyo	620	0644	edit dl rm
string.py	21548	0644	edit dl rm
string.pyc	20459	0644	edit dl rm
string.pyo	20459	0644	edit dl rm
StringIO.py	10662	0644	edit dl rm
StringIO.pyc	11480	0644	edit dl rm
StringIO.pyo	11480	0644	edit dl rm
stringold.py	12449	0644	edit dl rm
stringold.pyc	12549	0644	edit dl rm
stringold.pyo	12549	0644	edit dl rm
stringprep.py	13522	0644	edit dl rm
stringprep.pyc	14487	0644	edit dl rm
stringprep.pyo	14415	0644	edit dl rm
struct.py	82	0644	edit dl rm
struct.pyc	239	0644	edit dl rm
struct.pyo	239	0644	edit dl rm
subprocess.py	50520	0644	edit dl rm
subprocess.pyc	32398	0644	edit dl rm
subprocess.pyo	32398	0644	edit dl rm
sunau.py	17222	0644	edit dl rm
sunau.pyc	18394	0644	edit dl rm
sunau.pyo	18394	0644	edit dl rm
sunaudio.py	1399	0644	edit dl rm
sunaudio.pyc	1987	0644	edit dl rm
sunaudio.pyo	1987	0644	edit dl rm
symbol.py	2057	0755	edit dl rm
symbol.pyc	3026	0644	edit dl rm
symbol.pyo	3026	0644	edit dl rm
symtable.py	7437	0644	edit dl rm
symtable.pyc	11786	0644	edit dl rm
symtable.pyo	11655	0644	edit dl rm
sysconfig.py	22852	0644	edit dl rm
sysconfig.pyc	17818	0644	edit dl rm
sysconfig.pyo	17818	0644	edit dl rm
tabnanny.py	11339	0755	edit dl rm
tabnanny.pyc	8247	0644	edit dl rm
tabnanny.pyo	8247	0644	edit dl rm
tarfile.py	90655	0644	edit dl rm
tarfile.pyc	76193	0644	edit dl rm
tarfile.pyo	76193	0644	edit dl rm
telnetlib.py	27036	0644	edit dl rm
telnetlib.pyc	23154	0644	edit dl rm
telnetlib.pyo	23154	0644	edit dl rm
tempfile.py	19547	0644	edit dl rm
tempfile.pyc	20344	0644	edit dl rm
tempfile.pyo	20344	0644	edit dl rm
textwrap.py	17280	0644	edit dl rm
textwrap.pyc	12097	0644	edit dl rm
textwrap.pyo	12005	0644	edit dl rm
this.py	1002	0644	edit dl rm
this.pyc	1220	0644	edit dl rm
this.pyo	1220	0644	edit dl rm
threading.py	47377	0644	edit dl rm
threading.pyc	42726	0644	edit dl rm
threading.pyo	40552	0644	edit dl rm
timeit.py	12791	0755	edit dl rm
timeit.pyc	12183	0644	edit dl rm
timeit.pyo	12183	0644	edit dl rm
toaiff.py	3142	0644	edit dl rm
toaiff.pyc	3106	0644	edit dl rm
toaiff.pyo	3106	0644	edit dl rm
token.py	2922	0644	edit dl rm
token.pyc	3816	0644	edit dl rm
token.pyo	3816	0644	edit dl rm
tokenize.py	17483	0644	edit dl rm
tokenize.pyc	14505	0644	edit dl rm
tokenize.pyo	14449	0644	edit dl rm
trace.py	29891	0755	edit dl rm
trace.pyc	22793	0644	edit dl rm
trace.pyo	22730	0644	edit dl rm
traceback.py	11285	0644	edit dl rm
traceback.pyc	11679	0644	edit dl rm
traceback.pyo	11679	0644	edit dl rm
tty.py	879	0644	edit dl rm
tty.pyc	1317	0644	edit dl rm
tty.pyo	1317	0644	edit dl rm
types.py	2094	0644	edit dl rm
types.pyc	2725	0644	edit dl rm
types.pyo	2725	0644	edit dl rm
urllib.py	60228	0644	edit dl rm
urllib.pyc	51241	0644	edit dl rm
urllib.pyo	51146	0644	edit dl rm
urllib2.py	52541	0644	edit dl rm
urllib2.pyc	47302	0644	edit dl rm
urllib2.pyo	47207	0644	edit dl rm
urlparse.py	20461	0644	edit dl rm
urlparse.pyc	18015	0644	edit dl rm
urlparse.pyo	18015	0644	edit dl rm
user.py	1627	0644	edit dl rm
user.pyc	1724	0644	edit dl rm
user.pyo	1724	0644	edit dl rm
UserDict.py	7060	0644	edit dl rm
UserDict.pyc	9711	0644	edit dl rm
UserDict.pyo	9711	0644	edit dl rm
UserList.py	3644	0644	edit dl rm
UserList.pyc	6577	0644	edit dl rm
UserList.pyo	6577	0644	edit dl rm
UserString.py	9687	0755	edit dl rm
UserString.pyc	14864	0644	edit dl rm
UserString.pyo	14864	0644	edit dl rm
uu.py	6697	0755	edit dl rm
uu.pyc	4390	0644	edit dl rm
uu.pyo	4390	0644	edit dl rm
uuid.py	23530	0644	edit dl rm
uuid.pyc	23366	0644	edit dl rm
uuid.pyo	23250	0644	edit dl rm
warnings.py	14823	0644	edit dl rm
warnings.pyc	13510	0644	edit dl rm
warnings.pyo	12721	0644	edit dl rm
wave.py	18582	0644	edit dl rm
wave.pyc	20013	0644	edit dl rm
wave.pyo	19869	0644	edit dl rm
weakref.py	14830	0644	edit dl rm
weakref.pyc	16441	0644	edit dl rm
weakref.pyo	16441	0644	edit dl rm
webbrowser.py	22725	0755	edit dl rm
webbrowser.pyc	19750	0644	edit dl rm
webbrowser.pyo	19705	0644	edit dl rm
whichdb.py	3379	0644	edit dl rm
whichdb.pyc	2241	0644	edit dl rm
whichdb.pyo	2241	0644	edit dl rm
wsgiref.egg-info	187	0644	edit dl rm
xdrlib.py	6069	0644	edit dl rm
xdrlib.pyc	9902	0644	edit dl rm
xdrlib.pyo	9902	0644	edit dl rm
xmllib.py	34865	0644	edit dl rm
xmllib.pyc	26848	0644	edit dl rm
xmllib.pyo	26848	0644	edit dl rm
xmlrpclib.py	52136	0644	edit dl rm
xmlrpclib.pyc	44106	0644	edit dl rm
xmlrpclib.pyo	43922	0644	edit dl rm
zipfile.py	59477	0644	edit dl rm
zipfile.pyc	42137	0644	edit dl rm
zipfile.pyo	42137	0644	edit dl rm
_abcoll.py	18619	0644	edit dl rm
_abcoll.pyc	25682	0644	edit dl rm
_abcoll.pyo	25682	0644	edit dl rm
_LWPCookieJar.py	6553	0644	edit dl rm
_LWPCookieJar.pyc	5434	0644	edit dl rm
_LWPCookieJar.pyo	5434	0644	edit dl rm
_MozillaCookieJar.py	5797	0644	edit dl rm
_MozillaCookieJar.pyc	4461	0644	edit dl rm
_MozillaCookieJar.pyo	4422	0644	edit dl rm
_osx_support.py	19100	0644	edit dl rm
_osx_support.pyc	11758	0644	edit dl rm
_osx_support.pyo	11758	0644	edit dl rm
_pyio.py	69630	0644	edit dl rm
_pyio.pyc	64701	0644	edit dl rm
_pyio.pyo	64701	0644	edit dl rm
_strptime.py	20728	0644	edit dl rm
_strptime.pyc	15172	0644	edit dl rm
_strptime.pyo	15172	0644	edit dl rm
_sysconfigdata.py	19732	0644	edit dl rm
_sysconfigdata.pyc	22968	0644	edit dl rm
_sysconfigdata.pyo	22968	0644	edit dl rm
_threading_local.py	7260	0644	edit dl rm
_threading_local.pyc	6373	0644	edit dl rm
_threading_local.pyo	6373	0644	edit dl rm
_weakrefset.py	5911	0644	edit dl rm
_weakrefset.pyc	9678	0644	edit dl rm
_weakrefset.pyo	9678	0644	edit dl rm
__future__.py	4380	0644	edit dl rm
__future__.pyc	4223	0644	edit dl rm
__future__.pyo	4223	0644	edit dl rm
__phello__.foo.py	64	0644	edit dl rm
__phello__.foo.pyc	125	0644	edit dl rm
__phello__.foo.pyo	125	0644	edit dl rm

Edit: /usr/lib64/python2.7/_pyio.py (69630B)

"""
Python implementation of the io module.
"""

from __future__ import (print_function, unicode_literals)

import os
import abc
import codecs
import sys
import warnings
import errno
# Import thread instead of threading to reduce startup cost
try:
    from thread import allocate_lock as Lock
except ImportError:
    from dummy_thread import allocate_lock as Lock

import io
from io import (__all__, SEEK_SET, SEEK_CUR, SEEK_END)
from errno import EINTR

__metaclass__ = type

# open() uses st_blksize whenever we can
DEFAULT_BUFFER_SIZE = 8 * 1024  # bytes

# NOTE: Base classes defined here are registered with the "official" ABCs
# defined in io.py. We don't use real inheritance though, because we don't want
# to inherit the C implementations.

class BlockingIOError(IOError):

"""Exception raised when I/O would block on a non-blocking I/O stream."""

def __init__(self, errno, strerror, characters_written=0):
        super(IOError, self).__init__(errno, strerror)
        if not isinstance(characters_written, (int, long)):
            raise TypeError("characters_written must be a integer")
        self.characters_written = characters_written

def open(file, mode="r", buffering=-1,
         encoding=None, errors=None,
         newline=None, closefd=True):

r"""Open file and return a stream.  Raise IOError upon failure.

file is either a text or byte string giving the name (and the path
    if the file isn't in the current working directory) of the file to
    be opened or an integer file descriptor of the file to be
    wrapped. (If a file descriptor is given, it is closed when the
    returned I/O object is closed, unless closefd is set to False.)

mode is an optional string that specifies the mode in which the file
    is opened. It defaults to 'r' which means open for reading in text
    mode.  Other common values are 'w' for writing (truncating the file if
    it already exists), and 'a' for appending (which on some Unix systems,
    means that all writes append to the end of the file regardless of the
    current seek position). In text mode, if encoding is not specified the
    encoding used is platform dependent. (For reading and writing raw
    bytes use binary mode and leave encoding unspecified.) The available
    modes are:

========= ===============================================================
    Character Meaning
    --------- ---------------------------------------------------------------
    'r'       open for reading (default)
    'w'       open for writing, truncating the file first
    'a'       open for writing, appending to the end of the file if it exists
    'b'       binary mode
    't'       text mode (default)
    '+'       open a disk file for updating (reading and writing)
    'U'       universal newline mode (for backwards compatibility; unneeded
              for new code)
    ========= ===============================================================

The default mode is 'rt' (open for reading text). For binary random
    access, the mode 'w+b' opens and truncates the file to 0 bytes, while
    'r+b' opens the file without truncation.

Python distinguishes between files opened in binary and text modes,
    even when the underlying operating system doesn't. Files opened in
    binary mode (appending 'b' to the mode argument) return contents as
    bytes objects without any decoding. In text mode (the default, or when
    't' is appended to the mode argument), the contents of the file are
    returned as strings, the bytes having been first decoded using a
    platform-dependent encoding or using the specified encoding if given.

buffering is an optional integer used to set the buffering policy.
    Pass 0 to switch buffering off (only allowed in binary mode), 1 to select
    line buffering (only usable in text mode), and an integer > 1 to indicate
    the size of a fixed-size chunk buffer.  When no buffering argument is
    given, the default buffering policy works as follows:

* Binary files are buffered in fixed-size chunks; the size of the buffer
      is chosen using a heuristic trying to determine the underlying device's
      "block size" and falling back on `io.DEFAULT_BUFFER_SIZE`.
      On many systems, the buffer will typically be 4096 or 8192 bytes long.

* "Interactive" text files (files for which isatty() returns True)
      use line buffering.  Other text files use the policy described above
      for binary files.

encoding is the name of the encoding used to decode or encode the
    file. This should only be used in text mode. The default encoding is
    platform dependent, but any encoding supported by Python can be
    passed.  See the codecs module for the list of supported encodings.

errors is an optional string that specifies how encoding errors are to
    be handled---this argument should not be used in binary mode. Pass
    'strict' to raise a ValueError exception if there is an encoding error
    (the default of None has the same effect), or pass 'ignore' to ignore
    errors. (Note that ignoring encoding errors can lead to data loss.)
    See the documentation for codecs.register for a list of the permitted
    encoding error strings.

newline controls how universal newlines works (it only applies to text
    mode). It can be None, '', '\n', '\r', and '\r\n'.  It works as
    follows:

* On input, if newline is None, universal newlines mode is
      enabled. Lines in the input can end in '\n', '\r', or '\r\n', and
      these are translated into '\n' before being returned to the
      caller. If it is '', universal newline mode is enabled, but line
      endings are returned to the caller untranslated. If it has any of
      the other legal values, input lines are only terminated by the given
      string, and the line ending is returned to the caller untranslated.

* On output, if newline is None, any '\n' characters written are
      translated to the system default line separator, os.linesep. If
      newline is '', no translation takes place. If newline is any of the
      other legal values, any '\n' characters written are translated to
      the given string.

If closefd is False, the underlying file descriptor will be kept open
    when the file is closed. This does not work when a file name is given
    and must be True in that case.

open() returns a file object whose type depends on the mode, and
    through which the standard file operations such as reading and writing
    are performed. When open() is used to open a file in a text mode ('w',
    'r', 'wt', 'rt', etc.), it returns a TextIOWrapper. When used to open
    a file in a binary mode, the returned class varies: in read binary
    mode, it returns a BufferedReader; in write binary and append binary
    modes, it returns a BufferedWriter, and in read/write mode, it returns
    a BufferedRandom.

It is also possible to use a string or bytearray as a file for both
    reading and writing. For strings StringIO can be used like a file
    opened in a text mode, and for bytes a BytesIO can be used like a file
    opened in a binary mode.
    """
    if not isinstance(file, (basestring, int, long)):
        raise TypeError("invalid file: %r" % file)
    if not isinstance(mode, basestring):
        raise TypeError("invalid mode: %r" % mode)
    if not isinstance(buffering, (int, long)):
        raise TypeError("invalid buffering: %r" % buffering)
    if encoding is not None and not isinstance(encoding, basestring):
        raise TypeError("invalid encoding: %r" % encoding)
    if errors is not None and not isinstance(errors, basestring):
        raise TypeError("invalid errors: %r" % errors)
    modes = set(mode)
    if modes - set("arwb+tU") or len(mode) > len(modes):
        raise ValueError("invalid mode: %r" % mode)
    reading = "r" in modes
    writing = "w" in modes
    appending = "a" in modes
    updating = "+" in modes
    text = "t" in modes
    binary = "b" in modes
    if "U" in modes:
        if writing or appending:
            raise ValueError("can't use U and writing mode at once")
        reading = True
    if text and binary:
        raise ValueError("can't have text and binary mode at once")
    if reading + writing + appending > 1:
        raise ValueError("can't have read/write/append mode at once")
    if not (reading or writing or appending):
        raise ValueError("must have exactly one of read/write/append mode")
    if binary and encoding is not None:
        raise ValueError("binary mode doesn't take an encoding argument")
    if binary and errors is not None:
        raise ValueError("binary mode doesn't take an errors argument")
    if binary and newline is not None:
        raise ValueError("binary mode doesn't take a newline argument")
    raw = FileIO(file,
                 (reading and "r" or "") +
                 (writing and "w" or "") +
                 (appending and "a" or "") +
                 (updating and "+" or ""),
                 closefd)
    result = raw
    try:
        line_buffering = False
        if buffering == 1 or buffering < 0 and raw.isatty():
            buffering = -1
            line_buffering = True
        if buffering < 0:
            buffering = DEFAULT_BUFFER_SIZE
            try:
                bs = os.fstat(raw.fileno()).st_blksize
            except (os.error, AttributeError):
                pass
            else:
                if bs > 1:
                    buffering = bs
        if buffering < 0:
            raise ValueError("invalid buffering size")
        if buffering == 0:
            if binary:
                return result
            raise ValueError("can't have unbuffered text I/O")
        if updating:
            buffer = BufferedRandom(raw, buffering)
        elif writing or appending:
            buffer = BufferedWriter(raw, buffering)
        elif reading:
            buffer = BufferedReader(raw, buffering)
        else:
            raise ValueError("unknown mode: %r" % mode)
        result = buffer
        if binary:
            return result
        text = TextIOWrapper(buffer, encoding, errors, newline, line_buffering)
        result = text
        text.mode = mode
        return result
    except:
        result.close()
        raise

class DocDescriptor:
    """Helper for builtins.open.__doc__
    """
    def __get__(self, obj, typ):
        return (
            "open(file, mode='r', buffering=-1, encoding=None, "
                 "errors=None, newline=None, closefd=True)\n\n" +
            open.__doc__)

class OpenWrapper:
    """Wrapper for builtins.open

Trick so that open won't become a bound method when stored
    as a class variable (as dbm.dumb does).

See initstdio() in Python/pythonrun.c.
    """
    __doc__ = DocDescriptor()

def __new__(cls, *args, **kwargs):
        return open(*args, **kwargs)

class UnsupportedOperation(ValueError, IOError):
    pass

class IOBase:
    __metaclass__ = abc.ABCMeta

"""The abstract base class for all I/O classes, acting on streams of
    bytes. There is no public constructor.

This class provides dummy implementations for many methods that
    derived classes can override selectively; the default implementations
    represent a file that cannot be read, written or seeked.

Even though IOBase does not declare read, readinto, or write because
    their signatures will vary, implementations and clients should
    consider those methods part of the interface. Also, implementations
    may raise an IOError when operations they do not support are called.

The basic type used for binary data read from or written to a file is
    the bytes type. Method arguments may also be bytearray or memoryview of
    arrays of bytes. In some cases, such as readinto, a writable object such
    as bytearray is required. Text I/O classes work with unicode data.

Note that calling any method (even inquiries) on a closed stream is
    undefined. Implementations may raise IOError in this case.

IOBase (and its subclasses) support the iterator protocol, meaning
    that an IOBase object can be iterated over yielding the lines in a
    stream.

IOBase also supports the :keyword:`with` statement. In this example,
    fp is closed after the suite of the with statement is complete:

with open('spam.txt', 'r') as fp:
        fp.write('Spam and eggs!')
    """

### Internal ###

def _unsupported(self, name):
        """Internal: raise an exception for unsupported operations."""
        raise UnsupportedOperation("%s.%s() not supported" %
                                   (self.__class__.__name__, name))

### Positioning ###

def seek(self, pos, whence=0):
        """Change stream position.

Change the stream position to byte offset pos. Argument pos is
        interpreted relative to the position indicated by whence.  Values
        for whence are:

* 0 -- start of stream (the default); offset should be zero or positive
        * 1 -- current stream position; offset may be negative
        * 2 -- end of stream; offset is usually negative

Return the new absolute position.
        """
        self._unsupported("seek")

def tell(self):
        """Return current stream position."""
        return self.seek(0, 1)

def truncate(self, pos=None):
        """Truncate file to size bytes.

Size defaults to the current IO position as reported by tell().  Return
        the new size.
        """
        self._unsupported("truncate")

### Flush and close ###

def flush(self):
        """Flush write buffers, if applicable.

This is not implemented for read-only and non-blocking streams.
        """
        self._checkClosed()
        # XXX Should this return the number of bytes written???

__closed = False

def close(self):
        """Flush and close the IO object.

This method has no effect if the file is already closed.
        """
        if not self.__closed:
            try:
                self.flush()
            finally:
                self.__closed = True

def __del__(self):
        """Destructor.  Calls close()."""
        # The try/except block is in case this is called at program
        # exit time, when it's possible that globals have already been
        # deleted, and then the close() call might fail.  Since
        # there's nothing we can do about such failures and they annoy
        # the end users, we suppress the traceback.
        try:
            self.close()
        except:
            pass

### Inquiries ###

def seekable(self):
        """Return whether object supports random access.

If False, seek(), tell() and truncate() will raise IOError.
        This method may need to do a test seek().
        """
        return False

def _checkSeekable(self, msg=None):
        """Internal: raise an IOError if file is not seekable
        """
        if not self.seekable():
            raise IOError("File or stream is not seekable."
                          if msg is None else msg)

def readable(self):
        """Return whether object was opened for reading.

If False, read() will raise IOError.
        """
        return False

def _checkReadable(self, msg=None):
        """Internal: raise an IOError if file is not readable
        """
        if not self.readable():
            raise IOError("File or stream is not readable."
                          if msg is None else msg)

def writable(self):
        """Return whether object was opened for writing.

If False, write() and truncate() will raise IOError.
        """
        return False

def _checkWritable(self, msg=None):
        """Internal: raise an IOError if file is not writable
        """
        if not self.writable():
            raise IOError("File or stream is not writable."
                          if msg is None else msg)

@property
    def closed(self):
        """closed: bool.  True iff the file has been closed.

For backwards compatibility, this is a property, not a predicate.
        """
        return self.__closed

def _checkClosed(self, msg=None):
        """Internal: raise a ValueError if file is closed
        """
        if self.closed:
            raise ValueError("I/O operation on closed file."
                             if msg is None else msg)

### Context manager ###

def __enter__(self):
        """Context management protocol.  Returns self."""
        self._checkClosed()
        return self

def __exit__(self, *args):
        """Context management protocol.  Calls close()"""
        self.close()

### Lower-level APIs ###

# XXX Should these be present even if unimplemented?

def fileno(self):
        """Returns underlying file descriptor if one exists.

An IOError is raised if the IO object does not use a file descriptor.
        """
        self._unsupported("fileno")

def isatty(self):
        """Return whether this is an 'interactive' stream.

Return False if it can't be determined.
        """
        self._checkClosed()
        return False

### Readline[s] and writelines ###

def readline(self, limit=-1):
        r"""Read and return a line from the stream.

If limit is specified, at most limit bytes will be read.

The line terminator is always b'\n' for binary files; for text
        files, the newlines argument to open can be used to select the line
        terminator(s) recognized.
        """
        # For backwards compatibility, a (slowish) readline().
        if hasattr(self, "peek"):
            def nreadahead():
                readahead = self.peek(1)
                if not readahead:
                    return 1
                n = (readahead.find(b"\n") + 1) or len(readahead)
                if limit >= 0:
                    n = min(n, limit)
                return n
        else:
            def nreadahead():
                return 1
        if limit is None:
            limit = -1
        elif not isinstance(limit, (int, long)):
            raise TypeError("limit must be an integer")
        res = bytearray()
        while limit < 0 or len(res) < limit:
            b = self.read(nreadahead())
            if not b:
                break
            res += b
            if res.endswith(b"\n"):
                break
        return bytes(res)

def __iter__(self):
        self._checkClosed()
        return self

def next(self):
        line = self.readline()
        if not line:
            raise StopIteration
        return line

def readlines(self, hint=None):
        """Return a list of lines from the stream.

hint can be specified to control the number of lines read: no more
        lines will be read if the total size (in bytes/characters) of all
        lines so far exceeds hint.
        """
        if hint is not None and not isinstance(hint, (int, long)):
            raise TypeError("integer or None expected")
        if hint is None or hint <= 0:
            return list(self)
        n = 0
        lines = []
        for line in self:
            lines.append(line)
            n += len(line)
            if n >= hint:
                break
        return lines

def writelines(self, lines):
        self._checkClosed()
        for line in lines:
            self.write(line)

io.IOBase.register(IOBase)

class RawIOBase(IOBase):

"""Base class for raw binary I/O."""

# The read() method is implemented by calling readinto(); derived
    # classes that want to support read() only need to implement
    # readinto() as a primitive operation.  In general, readinto() can be
    # more efficient than read().

# (It would be tempting to also provide an implementation of
    # readinto() in terms of read(), in case the latter is a more suitable
    # primitive operation, but that would lead to nasty recursion in case
    # a subclass doesn't implement either.)

def read(self, n=-1):
        """Read and return up to n bytes.

Returns an empty bytes object on EOF, or None if the object is
        set not to block and has no data to read.
        """
        if n is None:
            n = -1
        if n < 0:
            return self.readall()
        b = bytearray(n.__index__())
        n = self.readinto(b)
        if n is None:
            return None
        del b[n:]
        return bytes(b)

def readall(self):
        """Read until EOF, using multiple read() call."""
        res = bytearray()
        while True:
            data = self.read(DEFAULT_BUFFER_SIZE)
            if not data:
                break
            res += data
        if res:
            return bytes(res)
        else:
            # b'' or None
            return data

def readinto(self, b):
        """Read up to len(b) bytes into b.

Returns number of bytes read (0 for EOF), or None if the object
        is set not to block and has no data to read.
        """
        self._unsupported("readinto")

def write(self, b):
        """Write the given buffer to the IO stream.

Returns the number of bytes written, which may be less than len(b).
        """
        self._unsupported("write")

io.RawIOBase.register(RawIOBase)
from _io import FileIO
RawIOBase.register(FileIO)

class BufferedIOBase(IOBase):

"""Base class for buffered IO objects.

The main difference with RawIOBase is that the read() method
    supports omitting the size argument, and does not have a default
    implementation that defers to readinto().

In addition, read(), readinto() and write() may raise
    BlockingIOError if the underlying raw stream is in non-blocking
    mode and not ready; unlike their raw counterparts, they will never
    return None.

A typical implementation should not inherit from a RawIOBase
    implementation, but wrap one.
    """

def read(self, n=None):
        """Read and return up to n bytes.

If the argument is omitted, None, or negative, reads and
        returns all data until EOF.

If the argument is positive, and the underlying raw stream is
        not 'interactive', multiple raw reads may be issued to satisfy
        the byte count (unless EOF is reached first).  But for
        interactive raw streams (XXX and for pipes?), at most one raw
        read will be issued, and a short result does not imply that
        EOF is imminent.

Returns an empty bytes array on EOF.

Raises BlockingIOError if the underlying raw stream has no
        data at the moment.
        """
        self._unsupported("read")

def read1(self, n=None):
        """Read up to n bytes with at most one read() system call."""
        self._unsupported("read1")

def readinto(self, b):
        """Read up to len(b) bytes into b.

Like read(), this may issue multiple reads to the underlying raw
        stream, unless the latter is 'interactive'.

Returns the number of bytes read (0 for EOF).

Raises BlockingIOError if the underlying raw stream has no
        data at the moment.
        """
        data = self.read(len(b))
        n = len(data)
        try:
            b[:n] = data
        except TypeError as err:
            import array
            if not isinstance(b, array.array):
                raise err
            b[:n] = array.array(b'b', data)
        return n

def write(self, b):
        """Write the given buffer to the IO stream.

Return the number of bytes written, which is always len(b).

Raises BlockingIOError if the buffer is full and the
        underlying raw stream cannot accept more data at the moment.
        """
        self._unsupported("write")

def detach(self):
        """
        Separate the underlying raw stream from the buffer and return it.

After the raw stream has been detached, the buffer is in an unusable
        state.
        """
        self._unsupported("detach")

io.BufferedIOBase.register(BufferedIOBase)

class _BufferedIOMixin(BufferedIOBase):

"""A mixin implementation of BufferedIOBase with an underlying raw stream.

This passes most requests on to the underlying raw stream.  It
    does *not* provide implementations of read(), readinto() or
    write().
    """

def __init__(self, raw):
        self._raw = raw

### Positioning ###

def seek(self, pos, whence=0):
        new_position = self.raw.seek(pos, whence)
        if new_position < 0:
            raise IOError("seek() returned an invalid position")
        return new_position

def tell(self):
        pos = self.raw.tell()
        if pos < 0:
            raise IOError("tell() returned an invalid position")
        return pos

def truncate(self, pos=None):
        # Flush the stream.  We're mixing buffered I/O with lower-level I/O,
        # and a flush may be necessary to synch both views of the current
        # file state.
        self.flush()

if pos is None:
            pos = self.tell()
        # XXX: Should seek() be used, instead of passing the position
        # XXX  directly to truncate?
        return self.raw.truncate(pos)

### Flush and close ###

def flush(self):
        if self.closed:
            raise ValueError("flush of closed file")
        self.raw.flush()

def close(self):
        if self.raw is not None and not self.closed:
            try:
                # may raise BlockingIOError or BrokenPipeError etc
                self.flush()
            finally:
                self.raw.close()

def detach(self):
        if self.raw is None:
            raise ValueError("raw stream already detached")
        self.flush()
        raw = self._raw
        self._raw = None
        return raw

### Inquiries ###

def seekable(self):
        return self.raw.seekable()

def readable(self):
        return self.raw.readable()

def writable(self):
        return self.raw.writable()

@property
    def raw(self):
        return self._raw

@property
    def closed(self):
        return self.raw.closed

@property
    def name(self):
        return self.raw.name

@property
    def mode(self):
        return self.raw.mode

def __repr__(self):
        clsname = self.__class__.__name__
        try:
            name = self.name
        except Exception:
            return "<_pyio.{0}>".format(clsname)
        else:
            return "<_pyio.{0} name={1!r}>".format(clsname, name)

### Lower-level APIs ###

def fileno(self):
        return self.raw.fileno()

def isatty(self):
        return self.raw.isatty()

class BytesIO(BufferedIOBase):

"""Buffered I/O implementation using an in-memory bytes buffer."""

def __init__(self, initial_bytes=None):
        buf = bytearray()
        if initial_bytes is not None:
            buf.extend(initial_bytes)
        self._buffer = buf
        self._pos = 0

def __getstate__(self):
        if self.closed:
            raise ValueError("__getstate__ on closed file")
        return self.__dict__.copy()

def getvalue(self):
        """Return the bytes value (contents) of the buffer
        """
        if self.closed:
            raise ValueError("getvalue on closed file")
        return bytes(self._buffer)

def read(self, n=None):
        if self.closed:
            raise ValueError("read from closed file")
        if n is None:
            n = -1
        if not isinstance(n, (int, long)):
            raise TypeError("integer argument expected, got {0!r}".format(
                type(n)))
        if n < 0:
            n = len(self._buffer)
        if len(self._buffer) <= self._pos:
            return b""
        newpos = min(len(self._buffer), self._pos + n)
        b = self._buffer[self._pos : newpos]
        self._pos = newpos
        return bytes(b)

def read1(self, n):
        """This is the same as read.
        """
        return self.read(n)

def write(self, b):
        if self.closed:
            raise ValueError("write to closed file")
        if isinstance(b, unicode):
            raise TypeError("can't write unicode to binary stream")
        n = len(b)
        if n == 0:
            return 0
        pos = self._pos
        if pos > len(self._buffer):
            # Inserts null bytes between the current end of the file
            # and the new write position.
            padding = b'\x00' * (pos - len(self._buffer))
            self._buffer += padding
        self._buffer[pos:pos + n] = b
        self._pos += n
        return n

def seek(self, pos, whence=0):
        if self.closed:
            raise ValueError("seek on closed file")
        try:
            pos.__index__
        except AttributeError:
            raise TypeError("an integer is required")
        if whence == 0:
            if pos < 0:
                raise ValueError("negative seek position %r" % (pos,))
            self._pos = pos
        elif whence == 1:
            self._pos = max(0, self._pos + pos)
        elif whence == 2:
            self._pos = max(0, len(self._buffer) + pos)
        else:
            raise ValueError("invalid whence value")
        return self._pos

def tell(self):
        if self.closed:
            raise ValueError("tell on closed file")
        return self._pos

def truncate(self, pos=None):
        if self.closed:
            raise ValueError("truncate on closed file")
        if pos is None:
            pos = self._pos
        else:
            try:
                pos.__index__
            except AttributeError:
                raise TypeError("an integer is required")
            if pos < 0:
                raise ValueError("negative truncate position %r" % (pos,))
        del self._buffer[pos:]
        return pos

def readable(self):
        if self.closed:
            raise ValueError("I/O operation on closed file.")
        return True

def writable(self):
        if self.closed:
            raise ValueError("I/O operation on closed file.")
        return True

def seekable(self):
        if self.closed:
            raise ValueError("I/O operation on closed file.")
        return True

class BufferedReader(_BufferedIOMixin):

"""BufferedReader(raw[, buffer_size])

A buffer for a readable, sequential BaseRawIO object.

The constructor creates a BufferedReader for the given readable raw
    stream and buffer_size. If buffer_size is omitted, DEFAULT_BUFFER_SIZE
    is used.
    """

def __init__(self, raw, buffer_size=DEFAULT_BUFFER_SIZE):
        """Create a new buffered reader using the given readable raw IO object.
        """
        if not raw.readable():
            raise IOError('"raw" argument must be readable.')

_BufferedIOMixin.__init__(self, raw)
        if buffer_size <= 0:
            raise ValueError("invalid buffer size")
        self.buffer_size = buffer_size
        self._reset_read_buf()
        self._read_lock = Lock()

def _reset_read_buf(self):
        self._read_buf = b""
        self._read_pos = 0

def read(self, n=None):
        """Read n bytes.

Returns exactly n bytes of data unless the underlying raw IO
        stream reaches EOF or if the call would block in non-blocking
        mode. If n is negative, read until EOF or until read() would
        block.
        """
        if n is not None and n < -1:
            raise ValueError("invalid number of bytes to read")
        with self._read_lock:
            return self._read_unlocked(n)

def _read_unlocked(self, n=None):
        nodata_val = b""
        empty_values = (b"", None)
        buf = self._read_buf
        pos = self._read_pos

# Special case for when the number of bytes to read is unspecified.
        if n is None or n == -1:
            self._reset_read_buf()
            chunks = [buf[pos:]]  # Strip the consumed bytes.
            current_size = 0
            while True:
                # Read until EOF or until read() would block.
                try:
                    chunk = self.raw.read()
                except IOError as e:
                    if e.errno != EINTR:
                        raise
                    continue
                if chunk in empty_values:
                    nodata_val = chunk
                    break
                current_size += len(chunk)
                chunks.append(chunk)
            return b"".join(chunks) or nodata_val

# The number of bytes to read is specified, return at most n bytes.
        avail = len(buf) - pos  # Length of the available buffered data.
        if n <= avail:
            # Fast path: the data to read is fully buffered.
            self._read_pos += n
            return buf[pos:pos+n]
        # Slow path: read from the stream until enough bytes are read,
        # or until an EOF occurs or until read() would block.
        chunks = [buf[pos:]]
        wanted = max(self.buffer_size, n)
        while avail < n:
            try:
                chunk = self.raw.read(wanted)
            except IOError as e:
                if e.errno != EINTR:
                    raise
                continue
            if chunk in empty_values:
                nodata_val = chunk
                break
            avail += len(chunk)
            chunks.append(chunk)
        # n is more than avail only when an EOF occurred or when
        # read() would have blocked.
        n = min(n, avail)
        out = b"".join(chunks)
        self._read_buf = out[n:]  # Save the extra data in the buffer.
        self._read_pos = 0
        return out[:n] if out else nodata_val

def peek(self, n=0):
        """Returns buffered bytes without advancing the position.

The argument indicates a desired minimal number of bytes; we
        do at most one raw read to satisfy it.  We never return more
        than self.buffer_size.
        """
        with self._read_lock:
            return self._peek_unlocked(n)

def _peek_unlocked(self, n=0):
        want = min(n, self.buffer_size)
        have = len(self._read_buf) - self._read_pos
        if have < want or have <= 0:
            to_read = self.buffer_size - have
            while True:
                try:
                    current = self.raw.read(to_read)
                except IOError as e:
                    if e.errno != EINTR:
                        raise
                    continue
                break
            if current:
                self._read_buf = self._read_buf[self._read_pos:] + current
                self._read_pos = 0
        return self._read_buf[self._read_pos:]

def read1(self, n):
        """Reads up to n bytes, with at most one read() system call."""
        # Returns up to n bytes.  If at least one byte is buffered, we
        # only return buffered bytes.  Otherwise, we do one raw read.
        if n < 0:
            raise ValueError("number of bytes to read must be positive")
        if n == 0:
            return b""
        with self._read_lock:
            self._peek_unlocked(1)
            return self._read_unlocked(
                min(n, len(self._read_buf) - self._read_pos))

def tell(self):
        return _BufferedIOMixin.tell(self) - len(self._read_buf) + self._read_pos

def seek(self, pos, whence=0):
        if not (0 <= whence <= 2):
            raise ValueError("invalid whence value")
        with self._read_lock:
            if whence == 1:
                pos -= len(self._read_buf) - self._read_pos
            pos = _BufferedIOMixin.seek(self, pos, whence)
            self._reset_read_buf()
            return pos

class BufferedWriter(_BufferedIOMixin):

"""A buffer for a writeable sequential RawIO object.

The constructor creates a BufferedWriter for the given writeable raw
    stream. If the buffer_size is not given, it defaults to
    DEFAULT_BUFFER_SIZE.
    """

_warning_stack_offset = 2

def __init__(self, raw,
                 buffer_size=DEFAULT_BUFFER_SIZE, max_buffer_size=None):
        if not raw.writable():
            raise IOError('"raw" argument must be writable.')

_BufferedIOMixin.__init__(self, raw)
        if buffer_size <= 0:
            raise ValueError("invalid buffer size")
        if max_buffer_size is not None:
            warnings.warn("max_buffer_size is deprecated", DeprecationWarning,
                          self._warning_stack_offset)
        self.buffer_size = buffer_size
        self._write_buf = bytearray()
        self._write_lock = Lock()

def write(self, b):
        if self.closed:
            raise ValueError("write to closed file")
        if isinstance(b, unicode):
            raise TypeError("can't write unicode to binary stream")
        with self._write_lock:
            # XXX we can implement some more tricks to try and avoid
            # partial writes
            if len(self._write_buf) > self.buffer_size:
                # We're full, so let's pre-flush the buffer.  (This may
                # raise BlockingIOError with characters_written == 0.)
                self._flush_unlocked()
            before = len(self._write_buf)
            self._write_buf.extend(b)
            written = len(self._write_buf) - before
            if len(self._write_buf) > self.buffer_size:
                try:
                    self._flush_unlocked()
                except BlockingIOError as e:
                    if len(self._write_buf) > self.buffer_size:
                        # We've hit the buffer_size. We have to accept a partial
                        # write and cut back our buffer.
                        overage = len(self._write_buf) - self.buffer_size
                        written -= overage
                        self._write_buf = self._write_buf[:self.buffer_size]
                        raise BlockingIOError(e.errno, e.strerror, written)
            return written

def truncate(self, pos=None):
        with self._write_lock:
            self._flush_unlocked()
            if pos is None:
                pos = self.raw.tell()
            return self.raw.truncate(pos)

def flush(self):
        with self._write_lock:
            self._flush_unlocked()

def _flush_unlocked(self):
        if self.closed:
            raise ValueError("flush of closed file")
        while self._write_buf:
            try:
                n = self.raw.write(self._write_buf)
            except BlockingIOError:
                raise RuntimeError("self.raw should implement RawIOBase: it "
                                   "should not raise BlockingIOError")
            except IOError as e:
                if e.errno != EINTR:
                    raise
                continue
            if n is None:
                raise BlockingIOError(
                    errno.EAGAIN,
                    "write could not complete without blocking", 0)
            if n > len(self._write_buf) or n < 0:
                raise IOError("write() returned incorrect number of bytes")
            del self._write_buf[:n]

def tell(self):
        return _BufferedIOMixin.tell(self) + len(self._write_buf)

def seek(self, pos, whence=0):
        if not (0 <= whence <= 2):
            raise ValueError("invalid whence")
        with self._write_lock:
            self._flush_unlocked()
            return _BufferedIOMixin.seek(self, pos, whence)

class BufferedRWPair(BufferedIOBase):

"""A buffered reader and writer object together.

A buffered reader object and buffered writer object put together to
    form a sequential IO object that can read and write. This is typically
    used with a socket or two-way pipe.

reader and writer are RawIOBase objects that are readable and
    writeable respectively. If the buffer_size is omitted it defaults to
    DEFAULT_BUFFER_SIZE.
    """

# XXX The usefulness of this (compared to having two separate IO
    # objects) is questionable.

def __init__(self, reader, writer,
                 buffer_size=DEFAULT_BUFFER_SIZE, max_buffer_size=None):
        """Constructor.

The arguments are two RawIO instances.
        """
        if max_buffer_size is not None:
            warnings.warn("max_buffer_size is deprecated", DeprecationWarning, 2)

if not reader.readable():
            raise IOError('"reader" argument must be readable.')

if not writer.writable():
            raise IOError('"writer" argument must be writable.')

self.reader = BufferedReader(reader, buffer_size)
        self.writer = BufferedWriter(writer, buffer_size)

def read(self, n=None):
        if n is None:
            n = -1
        return self.reader.read(n)

def readinto(self, b):
        return self.reader.readinto(b)

def write(self, b):
        return self.writer.write(b)

def peek(self, n=0):
        return self.reader.peek(n)

def read1(self, n):
        return self.reader.read1(n)

def readable(self):
        return self.reader.readable()

def writable(self):
        return self.writer.writable()

def flush(self):
        return self.writer.flush()

def close(self):
        try:
            self.writer.close()
        finally:
            self.reader.close()

def isatty(self):
        return self.reader.isatty() or self.writer.isatty()

@property
    def closed(self):
        return self.writer.closed

class BufferedRandom(BufferedWriter, BufferedReader):

"""A buffered interface to random access streams.

The constructor creates a reader and writer for a seekable stream,
    raw, given in the first argument. If the buffer_size is omitted it
    defaults to DEFAULT_BUFFER_SIZE.
    """

_warning_stack_offset = 3

def __init__(self, raw,
                 buffer_size=DEFAULT_BUFFER_SIZE, max_buffer_size=None):
        raw._checkSeekable()
        BufferedReader.__init__(self, raw, buffer_size)
        BufferedWriter.__init__(self, raw, buffer_size, max_buffer_size)

def seek(self, pos, whence=0):
        if not (0 <= whence <= 2):
            raise ValueError("invalid whence")
        self.flush()
        if self._read_buf:
            # Undo read ahead.
            with self._read_lock:
                self.raw.seek(self._read_pos - len(self._read_buf), 1)
        # First do the raw seek, then empty the read buffer, so that
        # if the raw seek fails, we don't lose buffered data forever.
        pos = self.raw.seek(pos, whence)
        with self._read_lock:
            self._reset_read_buf()
        if pos < 0:
            raise IOError("seek() returned invalid position")
        return pos

def tell(self):
        if self._write_buf:
            return BufferedWriter.tell(self)
        else:
            return BufferedReader.tell(self)

def truncate(self, pos=None):
        if pos is None:
            pos = self.tell()
        # Use seek to flush the read buffer.
        return BufferedWriter.truncate(self, pos)

def read(self, n=None):
        if n is None:
            n = -1
        self.flush()
        return BufferedReader.read(self, n)

def readinto(self, b):
        self.flush()
        return BufferedReader.readinto(self, b)

def peek(self, n=0):
        self.flush()
        return BufferedReader.peek(self, n)

def read1(self, n):
        self.flush()
        return BufferedReader.read1(self, n)

def write(self, b):
        if self._read_buf:
            # Undo readahead
            with self._read_lock:
                self.raw.seek(self._read_pos - len(self._read_buf), 1)
                self._reset_read_buf()
        return BufferedWriter.write(self, b)

class TextIOBase(IOBase):

"""Base class for text I/O.

This class provides a character and line based interface to stream
    I/O. There is no readinto method because Python's character strings
    are immutable. There is no public constructor.
    """

def read(self, n=-1):
        """Read at most n characters from stream.

Read from underlying buffer until we have n characters or we hit EOF.
        If n is negative or omitted, read until EOF.
        """
        self._unsupported("read")

def write(self, s):
        """Write string s to stream."""
        self._unsupported("write")

def truncate(self, pos=None):
        """Truncate size to pos."""
        self._unsupported("truncate")

def readline(self):
        """Read until newline or EOF.

Returns an empty string if EOF is hit immediately.
        """
        self._unsupported("readline")

def detach(self):
        """
        Separate the underlying buffer from the TextIOBase and return it.

After the underlying buffer has been detached, the TextIO is in an
        unusable state.
        """
        self._unsupported("detach")

@property
    def encoding(self):
        """Subclasses should override."""
        return None

@property
    def newlines(self):
        """Line endings translated so far.

Only line endings translated during reading are considered.

Subclasses should override.
        """
        return None

@property
    def errors(self):
        """Error setting of the decoder or encoder.

Subclasses should override."""
        return None

io.TextIOBase.register(TextIOBase)

class IncrementalNewlineDecoder(codecs.IncrementalDecoder):
    r"""Codec used when reading a file in universal newlines mode.  It wraps
    another incremental decoder, translating \r\n and \r into \n.  It also
    records the types of newlines encountered.  When used with
    translate=False, it ensures that the newline sequence is returned in
    one piece.
    """
    def __init__(self, decoder, translate, errors='strict'):
        codecs.IncrementalDecoder.__init__(self, errors=errors)
        self.translate = translate
        self.decoder = decoder
        self.seennl = 0
        self.pendingcr = False

def decode(self, input, final=False):
        # decode input (with the eventual \r from a previous pass)
        if self.decoder is None:
            output = input
        else:
            output = self.decoder.decode(input, final=final)
        if self.pendingcr and (output or final):
            output = "\r" + output
            self.pendingcr = False

# retain last \r even when not translating data:
        # then readline() is sure to get \r\n in one pass
        if output.endswith("\r") and not final:
            output = output[:-1]
            self.pendingcr = True

# Record which newlines are read
        crlf = output.count('\r\n')
        cr = output.count('\r') - crlf
        lf = output.count('\n') - crlf
        self.seennl |= (lf and self._LF) | (cr and self._CR) \
                    | (crlf and self._CRLF)

if self.translate:
            if crlf:
                output = output.replace("\r\n", "\n")
            if cr:
                output = output.replace("\r", "\n")

return output

def getstate(self):
        if self.decoder is None:
            buf = b""
            flag = 0
        else:
            buf, flag = self.decoder.getstate()
        flag <<= 1
        if self.pendingcr:
            flag |= 1
        return buf, flag

def setstate(self, state):
        buf, flag = state
        self.pendingcr = bool(flag & 1)
        if self.decoder is not None:
            self.decoder.setstate((buf, flag >> 1))

def reset(self):
        self.seennl = 0
        self.pendingcr = False
        if self.decoder is not None:
            self.decoder.reset()

_LF = 1
    _CR = 2
    _CRLF = 4

@property
    def newlines(self):
        return (None,
                "\n",
                "\r",
                ("\r", "\n"),
                "\r\n",
                ("\n", "\r\n"),
                ("\r", "\r\n"),
                ("\r", "\n", "\r\n")
               )[self.seennl]

class TextIOWrapper(TextIOBase):

r"""Character and line based layer over a BufferedIOBase object, buffer.

encoding gives the name of the encoding that the stream will be
    decoded or encoded with. It defaults to locale.getpreferredencoding.

errors determines the strictness of encoding and decoding (see the
    codecs.register) and defaults to "strict".

newline can be None, '', '\n', '\r', or '\r\n'.  It controls the
    handling of line endings. If it is None, universal newlines is
    enabled.  With this enabled, on input, the lines endings '\n', '\r',
    or '\r\n' are translated to '\n' before being returned to the
    caller. Conversely, on output, '\n' is translated to the system
    default line separator, os.linesep. If newline is any other of its
    legal values, that newline becomes the newline when the file is read
    and it is returned untranslated. On output, '\n' is converted to the
    newline.

If line_buffering is True, a call to flush is implied when a call to
    write contains a newline character.
    """

_CHUNK_SIZE = 2048

def __init__(self, buffer, encoding=None, errors=None, newline=None,
                 line_buffering=False):
        if newline is not None and not isinstance(newline, basestring):
            raise TypeError("illegal newline type: %r" % (type(newline),))
        if newline not in (None, "", "\n", "\r", "\r\n"):
            raise ValueError("illegal newline value: %r" % (newline,))
        if encoding is None:
            try:
                import locale
            except ImportError:
                # Importing locale may fail if Python is being built
                encoding = "ascii"
            else:
                encoding = locale.getpreferredencoding()

if not isinstance(encoding, basestring):
            raise ValueError("invalid encoding: %r" % encoding)

if sys.py3kwarning and not codecs.lookup(encoding)._is_text_encoding:
            msg = ("%r is not a text encoding; "
                   "use codecs.open() to handle arbitrary codecs")
            warnings.warnpy3k(msg % encoding, stacklevel=2)

if errors is None:
            errors = "strict"
        else:
            if not isinstance(errors, basestring):
                raise ValueError("invalid errors: %r" % errors)

self._buffer = buffer
        self._line_buffering = line_buffering
        self._encoding = encoding
        self._errors = errors
        self._readuniversal = not newline
        self._readtranslate = newline is None
        self._readnl = newline
        self._writetranslate = newline != ''
        self._writenl = newline or os.linesep
        self._encoder = None
        self._decoder = None
        self._decoded_chars = ''  # buffer for text returned from decoder
        self._decoded_chars_used = 0  # offset into _decoded_chars for read()
        self._snapshot = None  # info for reconstructing decoder state
        self._seekable = self._telling = self.buffer.seekable()

if self._seekable and self.writable():
            position = self.buffer.tell()
            if position != 0:
                try:
                    self._get_encoder().setstate(0)
                except LookupError:
                    # Sometimes the encoder doesn't exist
                    pass

# self._snapshot is either None, or a tuple (dec_flags, next_input)
    # where dec_flags is the second (integer) item of the decoder state
    # and next_input is the chunk of input bytes that comes next after the
    # snapshot point.  We use this to reconstruct decoder states in tell().

# Naming convention:
    #   - "bytes_..." for integer variables that count input bytes
    #   - "chars_..." for integer variables that count decoded characters

def __repr__(self):
        try:
            name = self.name
        except Exception:
            return "<_pyio.TextIOWrapper encoding='{0}'>".format(self.encoding)
        else:
            return "<_pyio.TextIOWrapper name={0!r} encoding='{1}'>".format(
                name, self.encoding)

@property
    def encoding(self):
        return self._encoding

@property
    def errors(self):
        return self._errors

@property
    def line_buffering(self):
        return self._line_buffering

@property
    def buffer(self):
        return self._buffer

def seekable(self):
        if self.closed:
            raise ValueError("I/O operation on closed file.")
        return self._seekable

def readable(self):
        return self.buffer.readable()

def writable(self):
        return self.buffer.writable()

def flush(self):
        self.buffer.flush()
        self._telling = self._seekable

def close(self):
        if self.buffer is not None and not self.closed:
            try:
                self.flush()
            finally:
                self.buffer.close()

@property
    def closed(self):
        return self.buffer.closed

@property
    def name(self):
        return self.buffer.name

def fileno(self):
        return self.buffer.fileno()

def isatty(self):
        return self.buffer.isatty()

def write(self, s):
        if self.closed:
            raise ValueError("write to closed file")
        if not isinstance(s, unicode):
            raise TypeError("can't write %s to text stream" %
                            s.__class__.__name__)
        length = len(s)
        haslf = (self._writetranslate or self._line_buffering) and "\n" in s
        if haslf and self._writetranslate and self._writenl != "\n":
            s = s.replace("\n", self._writenl)
        encoder = self._encoder or self._get_encoder()
        # XXX What if we were just reading?
        b = encoder.encode(s)
        self.buffer.write(b)
        if self._line_buffering and (haslf or "\r" in s):
            self.flush()
        self._set_decoded_chars('')
        self._snapshot = None
        if self._decoder:
            self._decoder.reset()
        return length

def _get_encoder(self):
        make_encoder = codecs.getincrementalencoder(self._encoding)
        self._encoder = make_encoder(self._errors)
        return self._encoder

def _get_decoder(self):
        make_decoder = codecs.getincrementaldecoder(self._encoding)
        decoder = make_decoder(self._errors)
        if self._readuniversal:
            decoder = IncrementalNewlineDecoder(decoder, self._readtranslate)
        self._decoder = decoder
        return decoder

# The following three methods implement an ADT for _decoded_chars.
    # Text returned from the decoder is buffered here until the client
    # requests it by calling our read() or readline() method.
    def _set_decoded_chars(self, chars):
        """Set the _decoded_chars buffer."""
        self._decoded_chars = chars
        self._decoded_chars_used = 0

def _get_decoded_chars(self, n=None):
        """Advance into the _decoded_chars buffer."""
        offset = self._decoded_chars_used
        if n is None:
            chars = self._decoded_chars[offset:]
        else:
            chars = self._decoded_chars[offset:offset + n]
        self._decoded_chars_used += len(chars)
        return chars

def _rewind_decoded_chars(self, n):
        """Rewind the _decoded_chars buffer."""
        if self._decoded_chars_used < n:
            raise AssertionError("rewind decoded_chars out of bounds")
        self._decoded_chars_used -= n

def _read_chunk(self):
        """
        Read and decode the next chunk of data from the BufferedReader.
        """

# The return value is True unless EOF was reached.  The decoded
        # string is placed in self._decoded_chars (replacing its previous
        # value).  The entire input chunk is sent to the decoder, though
        # some of it may remain buffered in the decoder, yet to be
        # converted.

if self._decoder is None:
            raise ValueError("no decoder")

if self._telling:
            # To prepare for tell(), we need to snapshot a point in the
            # file where the decoder's input buffer is empty.

dec_buffer, dec_flags = self._decoder.getstate()
            # Given this, we know there was a valid snapshot point
            # len(dec_buffer) bytes ago with decoder state (b'', dec_flags).

# Read a chunk, decode it, and put the result in self._decoded_chars.
        input_chunk = self.buffer.read1(self._CHUNK_SIZE)
        eof = not input_chunk
        self._set_decoded_chars(self._decoder.decode(input_chunk, eof))

if self._telling:
            # At the snapshot point, len(dec_buffer) bytes before the read,
            # the next input to be decoded is dec_buffer + input_chunk.
            self._snapshot = (dec_flags, dec_buffer + input_chunk)

return not eof

def _pack_cookie(self, position, dec_flags=0,
                           bytes_to_feed=0, need_eof=0, chars_to_skip=0):
        # The meaning of a tell() cookie is: seek to position, set the
        # decoder flags to dec_flags, read bytes_to_feed bytes, feed them
        # into the decoder with need_eof as the EOF flag, then skip
        # chars_to_skip characters of the decoded result.  For most simple
        # decoders, tell() will often just give a byte offset in the file.
        return (position | (dec_flags<<64) | (bytes_to_feed<<128) |
               (chars_to_skip<<192) | bool(need_eof)<<256)

def _unpack_cookie(self, bigint):
        rest, position = divmod(bigint, 1<<64)
        rest, dec_flags = divmod(rest, 1<<64)
        rest, bytes_to_feed = divmod(rest, 1<<64)
        need_eof, chars_to_skip = divmod(rest, 1<<64)
        return position, dec_flags, bytes_to_feed, need_eof, chars_to_skip

def tell(self):
        if not self._seekable:
            raise IOError("underlying stream is not seekable")
        if not self._telling:
            raise IOError("telling position disabled by next() call")
        self.flush()
        position = self.buffer.tell()
        decoder = self._decoder
        if decoder is None or self._snapshot is None:
            if self._decoded_chars:
                # This should never happen.
                raise AssertionError("pending decoded text")
            return position

# Skip backward to the snapshot point (see _read_chunk).
        dec_flags, next_input = self._snapshot
        position -= len(next_input)

# How many decoded characters have been used up since the snapshot?
        chars_to_skip = self._decoded_chars_used
        if chars_to_skip == 0:
            # We haven't moved from the snapshot point.
            return self._pack_cookie(position, dec_flags)

# Starting from the snapshot position, we will walk the decoder
        # forward until it gives us enough decoded characters.
        saved_state = decoder.getstate()
        try:
            # Note our initial start point.
            decoder.setstate((b'', dec_flags))
            start_pos = position
            start_flags, bytes_fed, chars_decoded = dec_flags, 0, 0
            need_eof = 0

# Feed the decoder one byte at a time.  As we go, note the
            # nearest "safe start point" before the current location
            # (a point where the decoder has nothing buffered, so seek()
            # can safely start from there and advance to this location).
            for next_byte in next_input:
                bytes_fed += 1
                chars_decoded += len(decoder.decode(next_byte))
                dec_buffer, dec_flags = decoder.getstate()
                if not dec_buffer and chars_decoded <= chars_to_skip:
                    # Decoder buffer is empty, so this is a safe start point.
                    start_pos += bytes_fed
                    chars_to_skip -= chars_decoded
                    start_flags, bytes_fed, chars_decoded = dec_flags, 0, 0
                if chars_decoded >= chars_to_skip:
                    break
            else:
                # We didn't get enough decoded data; signal EOF to get more.
                chars_decoded += len(decoder.decode(b'', final=True))
                need_eof = 1
                if chars_decoded < chars_to_skip:
                    raise IOError("can't reconstruct logical file position")

# The returned cookie corresponds to the last safe start point.
            return self._pack_cookie(
                start_pos, start_flags, bytes_fed, need_eof, chars_to_skip)
        finally:
            decoder.setstate(saved_state)

def truncate(self, pos=None):
        self.flush()
        if pos is None:
            pos = self.tell()
        return self.buffer.truncate(pos)

def detach(self):
        if self.buffer is None:
            raise ValueError("buffer is already detached")
        self.flush()
        buffer = self._buffer
        self._buffer = None
        return buffer

def seek(self, cookie, whence=0):
        if self.closed:
            raise ValueError("tell on closed file")
        if not self._seekable:
            raise IOError("underlying stream is not seekable")
        if whence == 1: # seek relative to current position
            if cookie != 0:
                raise IOError("can't do nonzero cur-relative seeks")
            # Seeking to the current position should attempt to
            # sync the underlying buffer with the current position.
            whence = 0
            cookie = self.tell()
        if whence == 2: # seek relative to end of file
            if cookie != 0:
                raise IOError("can't do nonzero end-relative seeks")
            self.flush()
            position = self.buffer.seek(0, 2)
            self._set_decoded_chars('')
            self._snapshot = None
            if self._decoder:
                self._decoder.reset()
            return position
        if whence != 0:
            raise ValueError("invalid whence (%r, should be 0, 1 or 2)" %
                             (whence,))
        if cookie < 0:
            raise ValueError("negative seek position %r" % (cookie,))
        self.flush()

# The strategy of seek() is to go back to the safe start point
        # and replay the effect of read(chars_to_skip) from there.
        start_pos, dec_flags, bytes_to_feed, need_eof, chars_to_skip = \
            self._unpack_cookie(cookie)

# Seek back to the safe start point.
        self.buffer.seek(start_pos)
        self._set_decoded_chars('')
        self._snapshot = None

# Restore the decoder to its state from the safe start point.
        if cookie == 0 and self._decoder:
            self._decoder.reset()
        elif self._decoder or dec_flags or chars_to_skip:
            self._decoder = self._decoder or self._get_decoder()
            self._decoder.setstate((b'', dec_flags))
            self._snapshot = (dec_flags, b'')

if chars_to_skip:
            # Just like _read_chunk, feed the decoder and save a snapshot.
            input_chunk = self.buffer.read(bytes_to_feed)
            self._set_decoded_chars(
                self._decoder.decode(input_chunk, need_eof))
            self._snapshot = (dec_flags, input_chunk)

# Skip chars_to_skip of the decoded characters.
            if len(self._decoded_chars) < chars_to_skip:
                raise IOError("can't restore logical file position")
            self._decoded_chars_used = chars_to_skip

# Finally, reset the encoder (merely useful for proper BOM handling)
        try:
            encoder = self._encoder or self._get_encoder()
        except LookupError:
            # Sometimes the encoder doesn't exist
            pass
        else:
            if cookie != 0:
                encoder.setstate(0)
            else:
                encoder.reset()
        return cookie

def read(self, n=None):
        self._checkReadable()
        if n is None:
            n = -1
        decoder = self._decoder or self._get_decoder()
        try:
            n.__index__
        except AttributeError:
            raise TypeError("an integer is required")
        if n < 0:
            # Read everything.
            result = (self._get_decoded_chars() +
                      decoder.decode(self.buffer.read(), final=True))
            self._set_decoded_chars('')
            self._snapshot = None
            return result
        else:
            # Keep reading chunks until we have n characters to return.
            eof = False
            result = self._get_decoded_chars(n)
            while len(result) < n and not eof:
                eof = not self._read_chunk()
                result += self._get_decoded_chars(n - len(result))
            return result

def next(self):
        self._telling = False
        line = self.readline()
        if not line:
            self._snapshot = None
            self._telling = self._seekable
            raise StopIteration
        return line

def readline(self, limit=None):
        if self.closed:
            raise ValueError("read from closed file")
        if limit is None:
            limit = -1
        elif not isinstance(limit, (int, long)):
            raise TypeError("limit must be an integer")

# Grab all the decoded text (we will rewind any extra bits later).
        line = self._get_decoded_chars()

start = 0
        # Make the decoder if it doesn't already exist.
        if not self._decoder:
            self._get_decoder()

pos = endpos = None
        while True:
            if self._readtranslate:
                # Newlines are already translated, only search for \n
                pos = line.find('\n', start)
                if pos >= 0:
                    endpos = pos + 1
                    break
                else:
                    start = len(line)

elif self._readuniversal:
                # Universal newline search. Find any of \r, \r\n, \n
                # The decoder ensures that \r\n are not split in two pieces

# In C we'd look for these in parallel of course.
                nlpos = line.find("\n", start)
                crpos = line.find("\r", start)
                if crpos == -1:
                    if nlpos == -1:
                        # Nothing found
                        start = len(line)
                    else:
                        # Found \n
                        endpos = nlpos + 1
                        break
                elif nlpos == -1:
                    # Found lone \r
                    endpos = crpos + 1
                    break
                elif nlpos < crpos:
                    # Found \n
                    endpos = nlpos + 1
                    break
                elif nlpos == crpos + 1:
                    # Found \r\n
                    endpos = crpos + 2
                    break
                else:
                    # Found \r
                    endpos = crpos + 1
                    break
            else:
                # non-universal
                pos = line.find(self._readnl)
                if pos >= 0:
                    endpos = pos + len(self._readnl)
                    break

if limit >= 0 and len(line) >= limit:
                endpos = limit  # reached length limit
                break

# No line ending seen yet - get more data'
            while self._read_chunk():
                if self._decoded_chars:
                    break
            if self._decoded_chars:
                line += self._get_decoded_chars()
            else:
                # end of file
                self._set_decoded_chars('')
                self._snapshot = None
                return line

if limit >= 0 and endpos > limit:
            endpos = limit  # don't exceed limit

# Rewind _decoded_chars to just after the line ending we found.
        self._rewind_decoded_chars(len(line) - endpos)
        return line[:endpos]

@property
    def newlines(self):
        return self._decoder.newlines if self._decoder else None

class StringIO(TextIOWrapper):
    """Text I/O implementation using an in-memory buffer.

The initial_value argument sets the value of object.  The newline
    argument is like the one of TextIOWrapper's constructor.
    """

def __init__(self, initial_value="", newline="\n"):
        super(StringIO, self).__init__(BytesIO(),
                                       encoding="utf-8",
                                       errors="strict",
                                       newline=newline)
        # Issue #5645: make universal newlines semantics the same as in the
        # C version, even under Windows.
        if newline is None:
            self._writetranslate = False
        if initial_value:
            if not isinstance(initial_value, unicode):
                initial_value = unicode(initial_value)
            self.write(initial_value)
            self.seek(0)

def getvalue(self):
        self.flush()
        decoder = self._decoder or self._get_decoder()
        old_state = decoder.getstate()
        decoder.reset()
        try:
            return decoder.decode(self.buffer.getvalue(), final=True)
        finally:
            decoder.setstate(old_state)

def __repr__(self):
        # TextIOWrapper tells the encoding in its repr. In StringIO,
        # that's an implementation detail.
        return object.__repr__(self)

@property
    def errors(self):
        return None

@property
    def encoding(self):
        return None

def detach(self):
        # This doesn't make sense on StringIO.
        self._unsupported("detach")

cmd: