FM / pod

/usr/share/perl5/pod

Name	Size	Mode	Actions
perl.pod	16270	0644	edit dl rm
perl56delta.pod	107201	0644	edit dl rm
perl58delta.pod	115165	0644	edit dl rm
perl561delta.pod	124713	0644	edit dl rm
perl581delta.pod	38061	0644	edit dl rm
perl582delta.pod	4470	0644	edit dl rm
perl583delta.pod	6335	0644	edit dl rm
perl584delta.pod	7363	0644	edit dl rm
perl585delta.pod	5889	0644	edit dl rm
perl586delta.pod	4651	0644	edit dl rm
perl587delta.pod	8357	0644	edit dl rm
perl588delta.pod	25272	0644	edit dl rm
perl589delta.pod	53900	0644	edit dl rm
perl5004delta.pod	56240	0644	edit dl rm
perl5005delta.pod	34283	0644	edit dl rm
perl5100delta.pod	55535	0644	edit dl rm
perl5101delta.pod	43888	0644	edit dl rm
perl5120delta.pod	89272	0644	edit dl rm
perl5121delta.pod	10141	0644	edit dl rm
perl5122delta.pod	9603	0644	edit dl rm
perl5123delta.pod	4100	0644	edit dl rm
perl5124delta.pod	3672	0644	edit dl rm
perl5125delta.pod	7683	0644	edit dl rm
perl5140delta.pod	144324	0644	edit dl rm
perl5141delta.pod	7966	0644	edit dl rm
perl5142delta.pod	6892	0644	edit dl rm
perl5143delta.pod	7760	0644	edit dl rm
perl5144delta.pod	6327	0644	edit dl rm
perl5160delta.pod	133651	0644	edit dl rm
perl5161delta.pod	6142	0644	edit dl rm
perl5162delta.pod	3594	0644	edit dl rm
perl5163delta.pod	4085	0644	edit dl rm
perl5180delta.pod	119431	0644	edit dl rm
perl5181delta.pod	6595	0644	edit dl rm
perl5182delta.pod	5335	0644	edit dl rm
perl5184delta.pod	4642	0644	edit dl rm
perl5200delta.pod	115699	0644	edit dl rm
perl5201delta.pod	10899	0644	edit dl rm
perl5202delta.pod	12509	0644	edit dl rm
perl5203delta.pod	9392	0644	edit dl rm
perl5220delta.pod	130963	0644	edit dl rm
perl5221delta.pod	10767	0644	edit dl rm
perl5222delta.pod	12629	0644	edit dl rm
perl5223delta.pod	8456	0644	edit dl rm
perl5224delta.pod	4460	0644	edit dl rm
perl5240delta.pod	64927	0644	edit dl rm
perl5241delta.pod	8215	0644	edit dl rm
perl5242delta.pod	4113	0644	edit dl rm
perl5243delta.pod	11428	0644	edit dl rm
perl5244delta.pod	4510	0644	edit dl rm
perl5260delta.pod	101836	0644	edit dl rm
perl5261delta.pod	7927	0644	edit dl rm
perl5262delta.pod	7880	0644	edit dl rm
perl5263delta.pod	7063	0644	edit dl rm
perl5280delta.pod	72113	0644	edit dl rm
perlaix.pod	20437	0644	edit dl rm
perlamiga.pod	5749	0644	edit dl rm
perlandroid.pod	7871	0644	edit dl rm
perlapi.pod	443535	0644	edit dl rm
perlapio.pod	19285	0644	edit dl rm
perlartistic.pod	7010	0644	edit dl rm
perlbook.pod	8338	0644	edit dl rm
perlboot.pod	294	0644	edit dl rm
perlbot.pod	304	0644	edit dl rm
perlbs2000.pod	8058	0644	edit dl rm
perlcall.pod	56706	0644	edit dl rm
perlce.pod	14602	0644	edit dl rm
perlcheat.pod	4481	0644	edit dl rm
perlclib.pod	9619	0644	edit dl rm
perlcn.pod	4691	0644	edit dl rm
perlcommunity.pod	7217	0644	edit dl rm
perlcygwin.pod	27199	0644	edit dl rm
perldata.pod	46743	0644	edit dl rm
perldbmfilter.pod	4981	0644	edit dl rm
perldebguts.pod	38535	0644	edit dl rm
perldebtut.pod	22152	0644	edit dl rm
perldebug.pod	39258	0644	edit dl rm
perldelta.pod	7063	0644	edit dl rm
perldeprecation.pod	18169	0644	edit dl rm
perldiag.pod	284572	0644	edit dl rm
perldos.pod	10522	0644	edit dl rm
perldsc.pod	25614	0644	edit dl rm
perldtrace.pod	7958	0644	edit dl rm
perlebcdic.pod	84233	0644	edit dl rm
perlembed.pod	37196	0644	edit dl rm
perlexperiment.pod	7195	0644	edit dl rm
perlfork.pod	13355	0644	edit dl rm
perlform.pod	16608	0644	edit dl rm
perlfreebsd.pod	1610	0644	edit dl rm
perlfunc.pod	392957	0644	edit dl rm
perlgit.pod	33509	0644	edit dl rm
perlgpl.pod	13815	0644	edit dl rm
perlguts.pod	139329	0644	edit dl rm
perlhack.pod	40445	0644	edit dl rm
perlhacktips.pod	55509	0644	edit dl rm
perlhacktut.pod	6153	0644	edit dl rm
perlhaiku.pod	1508	0644	edit dl rm
perlhist.pod	53546	0644	edit dl rm
perlhpux.pod	30509	0644	edit dl rm
perlhurd.pod	1993	0644	edit dl rm
perlintern.pod	54572	0644	edit dl rm
perlinterp.pod	33687	0644	edit dl rm
perlintro.pod	22119	0644	edit dl rm
perliol.pod	34185	0644	edit dl rm
perlipc.pod	70829	0644	edit dl rm
perlirix.pod	4395	0644	edit dl rm
perljp.pod	7521	0644	edit dl rm
perlko.pod	12259	0644	edit dl rm
perllexwarn.pod	355	0644	edit dl rm
perllinux.pod	1488	0644	edit dl rm
perllocale.pod	68678	0644	edit dl rm
perllol.pod	9580	0644	edit dl rm
perlmacos.pod	1001	0644	edit dl rm
perlmacosx.pod	12060	0644	edit dl rm
perlmod.pod	26250	0644	edit dl rm
perlmodinstall.pod	12792	0644	edit dl rm
perlmodlib.pod	76482	0644	edit dl rm
perlmodstyle.pod	22575	0644	edit dl rm
perlmroapi.pod	3212	0644	edit dl rm
perlnetware.pod	6648	0644	edit dl rm
perlnewmod.pod	11036	0644	edit dl rm
perlnumber.pod	8353	0644	edit dl rm
perlobj.pod	35537	0644	edit dl rm
perlootut.pod	26783	0644	edit dl rm
perlop.pod	136252	0644	edit dl rm
perlopenbsd.pod	1204	0644	edit dl rm
perlopentut.pod	9455	0644	edit dl rm
perlos2.pod	93351	0644	edit dl rm
perlos390.pod	15674	0644	edit dl rm
perlos400.pod	4768	0644	edit dl rm
perlpacktut.pod	51282	0644	edit dl rm
perlperf.pod	49881	0644	edit dl rm
perlplan9.pod	5125	0644	edit dl rm
perlpod.pod	22196	0644	edit dl rm
perlpodspec.pod	68476	0644	edit dl rm
perlpolicy.pod	25629	0644	edit dl rm
perlport.pod	87602	0644	edit dl rm
perlpragma.pod	5176	0644	edit dl rm
perlqnx.pod	6673	0644	edit dl rm
perlre.pod	120901	0644	edit dl rm
perlreapi.pod	30334	0644	edit dl rm
perlrebackslash.pod	31817	0644	edit dl rm
perlrecharclass.pod	49029	0644	edit dl rm
perlref.pod	35304	0644	edit dl rm
perlreftut.pod	18790	0644	edit dl rm
perlreguts.pod	38328	0644	edit dl rm
perlrepository.pod	509	0644	edit dl rm
perlrequick.pod	18497	0644	edit dl rm
perlreref.pod	14744	0644	edit dl rm
perlretut.pod	121257	0644	edit dl rm
perlriscos.pod	1529	0644	edit dl rm
perlrun.pod	53550	0644	edit dl rm
perlsec.pod	26184	0644	edit dl rm
perlsolaris.pod	29822	0644	edit dl rm
perlsource.pod	6876	0644	edit dl rm
perlstyle.pod	8630	0644	edit dl rm
perlsub.pod	72967	0644	edit dl rm
perlsymbian.pod	15359	0644	edit dl rm
perlsyn.pod	44512	0644	edit dl rm
perlsynology.pod	7778	0644	edit dl rm
perlthrtut.pod	46459	0644	edit dl rm
perltie.pod	38607	0644	edit dl rm
perltoc.pod	694171	0644	edit dl rm
perltodo.pod	376	0644	edit dl rm
perltooc.pod	294	0644	edit dl rm
perltoot.pod	294	0644	edit dl rm
perltrap.pod	10620	0644	edit dl rm
perltru64.pod	8492	0644	edit dl rm
perltw.pod	4477	0644	edit dl rm
perlunicode.pod	82491	0644	edit dl rm
perlunicook.pod	25488	0644	edit dl rm
perlunifaq.pod	13647	0644	edit dl rm
perluniintro.pod	38340	0644	edit dl rm
perluniprops.pod	285306	0644	edit dl rm
perlunitut.pod	7951	0644	edit dl rm
perlutil.pod	7640	0644	edit dl rm
perlvar.pod	78364	0644	edit dl rm
perlvms.pod	50823	0644	edit dl rm
perlvos.pod	3843	0644	edit dl rm
perlwin32.pod	39298	0644	edit dl rm
perlxs.pod	78920	0644	edit dl rm
perlxstut.pod	50095	0644	edit dl rm
perlxstypemap.pod	24001	0644	edit dl rm

Edit: /usr/share/perl5/pod/perl5160delta.pod (133651B)

=encoding utf8

=head1 NAME

perl5160delta - what is new for perl v5.16.0

=head1 DESCRIPTION

This document describes differences between the 5.14.0 release and
the 5.16.0 release.

If you are upgrading from an earlier release such as 5.12.0, first read
L<perl5140delta>, which describes differences between 5.12.0 and
5.14.0.

Some bug fixes in this release have been backported to later
releases of 5.14.x.  Those are indicated with the 5.14.x version in
parentheses.

=head1 Notice

With the release of Perl 5.16.0, the 5.12.x series of releases is now out of
its support period.  There may be future 5.12.x releases, but only in the
event of a critical security issue.  Users of Perl 5.12 or earlier should
consider upgrading to a more recent release of Perl.

This policy is described in greater detail in
L<perlpolicy|perlpolicy/MAINTENANCE AND SUPPORT>.

=head1 Core Enhancements

=head2 C<use I<VERSION>>

As of this release, version declarations like C<use v5.16> now disable
all features before enabling the new feature bundle.  This means that
the following holds true:

use 5.016;
    # only 5.16 features enabled here
    use 5.014;
    # only 5.14 features enabled here (not 5.16)

C<use v5.12> and higher continue to enable strict, but explicit C<use
strict> and C<no strict> now override the version declaration, even
when they come first:

no strict;
    use 5.012;
    # no strict here

There is a new ":default" feature bundle that represents the set of
features enabled before any version declaration or C<use feature> has
been seen.  Version declarations below 5.10 now enable the ":default"
feature set.  This does not actually change the behavior of C<use
v5.8>, because features added to the ":default" set are those that were
traditionally enabled by default, before they could be turned off.

C<< no feature >> now resets to the default feature set.  To disable all
features (which is likely to be a pretty special-purpose request, since
it presumably won't match any named set of semantics) you can now  
write C<< no feature ':all' >>.

C<$[> is now disabled under C<use v5.16>.  It is part of the default
feature set and can be turned on or off explicitly with C<use feature
'array_base'>.

=head2 C<__SUB__>

The new C<__SUB__> token, available under the C<current_sub> feature
(see L<feature>) or C<use v5.16>, returns a reference to the current
subroutine, making it easier to write recursive closures.

=head2 New and Improved Built-ins

=head3 More consistent C<eval>

The C<eval> operator sometimes treats a string argument as a sequence of
characters and sometimes as a sequence of bytes, depending on the
internal encoding.  The internal encoding is not supposed to make any
difference, but there is code that relies on this inconsistency.

The new C<unicode_eval> and C<evalbytes> features (enabled under C<use
5.16.0>) resolve this.  The C<unicode_eval> feature causes C<eval
$string> to treat the string always as Unicode.  The C<evalbytes>
features provides a function, itself called C<evalbytes>, which
evaluates its argument always as a string of bytes.

These features also fix oddities with source filters leaking to outer
dynamic scopes.

See L<feature> for more detail.

=head3 C<substr> lvalue revamp

=for comment Does this belong here, or under Incompatible Changes?

When C<substr> is called in lvalue or potential lvalue context with two
or three arguments, a special lvalue scalar is returned that modifies
the original string (the first argument) when assigned to.

Previously, the offsets (the second and third arguments) passed to
C<substr> would be converted immediately to match the string, negative
offsets being translated to positive and offsets beyond the end of the
string being truncated.

Now, the offsets are recorded without modification in the special
lvalue scalar that is returned, and the original string is not even
looked at by C<substr> itself, but only when the returned lvalue is
read or modified.

These changes result in an incompatible change:

If the original string changes length after the call to C<substr> but
before assignment to its return value, negative offsets will remember
their position from the end of the string, affecting code like this:

my $string = "string";
    my $lvalue = \substr $string, -4, 2;
    print $$lvalue, "\n"; # prints "ri"
    $string = "bailing twine";
    print $$lvalue, "\n"; # prints "wi"; used to print "il"

The same thing happens with an omitted third argument.  The returned
lvalue will always extend to the end of the string, even if the string
becomes longer.

Since this change also allowed many bugs to be fixed (see
L</The C<substr> operator>), and since the behavior
of negative offsets has never been specified, the
change was deemed acceptable.

=head3 Return value of C<tied>

The value returned by C<tied> on a tied variable is now the actual
scalar that holds the object to which the variable is tied.  This
lets ties be weakened with C<Scalar::Util::weaken(tied
$tied_variable)>.

=head2 Unicode Support

=head3 Supports (I<almost>) Unicode 6.1

Besides the addition of whole new scripts, and new characters in
existing scripts, this new version of Unicode, as always, makes some
changes to existing characters.  One change that may trip up some
applications is that the General Category of two characters in the
Latin-1 range, PILCROW SIGN and SECTION SIGN, has been changed from
Other_Symbol to Other_Punctuation.  The same change has been made for
a character in each of Tibetan, Ethiopic, and Aegean.
The code points U+3248..U+324F (CIRCLED NUMBER TEN ON BLACK SQUARE
through CIRCLED NUMBER EIGHTY ON BLACK SQUARE) have had their General
Category changed from Other_Symbol to Other_Numeric.  The Line Break
property has changes for Hebrew and Japanese; and because of
other changes in 6.1, the Perl regular expression construct C<\X> now
works differently for some characters in Thai and Lao.

New aliases (synonyms) have been defined for many property values;
these, along with the previously existing ones, are all cross-indexed in
L<perluniprops>.

The return value of C<charnames::viacode()> is affected by other
changes:

Code point      Old Name             New Name
   U+000A    LINE FEED (LF)        LINE FEED
   U+000C    FORM FEED (FF)        FORM FEED
   U+000D    CARRIAGE RETURN (CR)  CARRIAGE RETURN
   U+0085    NEXT LINE (NEL)       NEXT LINE
   U+008E    SINGLE-SHIFT 2        SINGLE-SHIFT-2
   U+008F    SINGLE-SHIFT 3        SINGLE-SHIFT-3
   U+0091    PRIVATE USE 1         PRIVATE USE-1
   U+0092    PRIVATE USE 2         PRIVATE USE-2
   U+2118    SCRIPT CAPITAL P      WEIERSTRASS ELLIPTIC FUNCTION

Perl will accept any of these names as input, but
C<charnames::viacode()> now returns the new name of each pair.  The
change for U+2118 is considered by Unicode to be a correction, that is
the original name was a mistake (but again, it will remain forever valid
to use it to refer to U+2118).  But most of these changes are the
fallout of the mistake Unicode 6.0 made in naming a character used in
Japanese cell phones to be "BELL", which conflicts with the longstanding
industry use of (and Unicode's recommendation to use) that name
to mean the ASCII control character at U+0007.  Therefore, that name
has been deprecated in Perl since v5.14, and any use of it will raise a
warning message (unless turned off).  The name "ALERT" is now the
preferred name for this code point, with "BEL" an acceptable short
form.  The name for the new cell phone character, at code point U+1F514,
remains undefined in this version of Perl (hence we don't 
implement quite all of Unicode 6.1), but starting in v5.18, BELL will mean
this character, and not U+0007.

Unicode has taken steps to make sure that this sort of mistake does not
happen again.  The Standard now includes all generally accepted
names and abbreviations for control characters, whereas previously it
didn't (though there were recommended names for most of them, which Perl
used).  This means that most of those recommended names are now
officially in the Standard.  Unicode did not recommend names for the
four code points listed above between U+008E and U+008F, and in
standardizing them Unicode subtly changed the names that Perl had
previously given them, by replacing the final blank in each name by a
hyphen.  Unicode also officially accepts names that Perl had deprecated,
such as FILE SEPARATOR.  Now the only deprecated name is BELL.
Finally, Perl now uses the new official names instead of the old
(now considered obsolete) names for the first four code points in the
list above (the ones which have the parentheses in them).

Now that the names have been placed in the Unicode standard, these kinds
of changes should not happen again, though corrections, such as to
U+2118, are still possible.

Unicode also added some name abbreviations, which Perl now accepts:
SP for SPACE;
TAB for CHARACTER TABULATION;
NEW LINE, END OF LINE, NL, and EOL for LINE FEED;
LOCKING-SHIFT ONE for SHIFT OUT;
LOCKING-SHIFT ZERO for SHIFT IN;
and ZWNBSP for ZERO WIDTH NO-BREAK SPACE.

More details on this version of Unicode are provided in
L<http://www.unicode.org/versions/Unicode6.1.0/>.

=head3 C<use charnames> is no longer needed for C<\N{I<name>}>

When C<\N{I<name>}> is encountered, the C<charnames> module is now
automatically loaded when needed as if the C<:full> and C<:short>
options had been specified.  See L<charnames> for more information.

=head3 C<\N{...}> can now have Unicode loose name matching

This is described in the C<charnames> item in
L</Updated Modules and Pragmata> below.

=head3 Unicode Symbol Names

Perl now has proper support for Unicode in symbol names.  It used to be
that C<*{$foo}> would ignore the internal UTF8 flag and use the bytes of
the underlying representation to look up the symbol.  That meant that
C<*{"\x{100}"}> and C<*{"\xc4\x80"}> would return the same thing.  All
these parts of Perl have been fixed to account for Unicode:

=over

=item *

Method names (including those passed to C<use overload>)

=item *

Typeglob names (including names of variables, subroutines, and filehandles)

=item *

Package names

=item *

C<goto>

=item *

Symbolic dereferencing

=item *

Second argument to C<bless()> and C<tie()>

=item *

Return value of C<ref()>

=item *

Subroutine prototypes

=item *

Attributes

=item *

Various warnings and error messages that mention variable names or values,
methods, etc.

=back

In addition, a parsing bug has been fixed that prevented C<*{é}> from
implicitly quoting the name, but instead interpreted it as C<*{+é}>, which
would cause a strict violation.

C<*{"*a::b"}> automatically strips off the * if it is followed by an ASCII
letter.  That has been extended to all Unicode identifier characters.

One-character non-ASCII non-punctuation variables (like C<$é>) are now
subject to "Used only once" warnings.  They used to be exempt, as they
were treated as punctuation variables.

Also, single-character Unicode punctuation variables (like C<$‰>) are now
supported [perl #69032].

=head3 Improved ability to mix locales and Unicode, including UTF-8 locales

An optional parameter has been added to C<use locale>

use locale ':not_characters';

which tells Perl to use all but the C<LC_CTYPE> and C<LC_COLLATE>
portions of the current locale.  Instead, the character set is assumed
to be Unicode.  This lets locales and Unicode be seamlessly mixed,
including the increasingly frequent UTF-8 locales.  When using this
hybrid form of locales, the C<:locale> layer to the L<open> pragma can
be used to interface with the file system, and there are CPAN modules
available for ARGV and environment variable conversions.

Full details are in L<perllocale>.

=head3 New function C<fc> and corresponding escape sequence C<\F> for Unicode foldcase

Unicode foldcase is an extension to lowercase that gives better results
when comparing two strings case-insensitively.  It has long been used
internally in regular expression C</i> matching.  Now it is available
explicitly through the new C<fc> function call (enabled by
S<C<"use feature 'fc'">>, or C<use v5.16>, or explicitly callable via
C<CORE::fc>) or through the new C<\F> sequence in double-quotish
strings.

Full details are in L<perlfunc/fc>.

=head3 The Unicode C<Script_Extensions> property is now supported.

New in Unicode 6.0, this is an improved C<Script> property.  Details
are in L<perlunicode/Scripts>.

=head2 XS Changes

=head3 Improved typemaps for Some Builtin Types

Most XS authors will know there is a longstanding bug in the
OUTPUT typemap for T_AVREF (C<AV*>), T_HVREF (C<HV*>), T_CVREF (C<CV*>),
and T_SVREF (C<SVREF> or C<\$foo>) that requires manually decrementing
the reference count of the return value instead of the typemap taking
care of this.  For backwards-compatibility, this cannot be changed in the
default typemaps.  But we now provide additional typemaps
C<T_AVREF_REFCOUNT_FIXED>, etc. that do not exhibit this bug.  Using
them in your extension is as simple as having one line in your
C<TYPEMAP> section:

HV*	T_HVREF_REFCOUNT_FIXED

=head3 C<is_utf8_char()>

The XS-callable function C<is_utf8_char()>, when presented with
malformed UTF-8 input, can read up to 12 bytes beyond the end of the
string.  This cannot be fixed without changing its API, and so its
use is now deprecated.  Use C<is_utf8_char_buf()> (described just below)
instead.

=head3 Added C<is_utf8_char_buf()>

This function is designed to replace the deprecated L</is_utf8_char()>
function.  It includes an extra parameter to make sure it doesn't read
past the end of the input buffer.

=head3 Other C<is_utf8_foo()> functions, as well as C<utf8_to_foo()>, etc.

Most other XS-callable functions that take UTF-8 encoded input
implicitly assume that the UTF-8 is valid (not malformed) with respect to
buffer length.  Do not do things such as change a character's case or
see if it is alphanumeric without first being sure that it is valid
UTF-8.  This can be safely done for a whole string by using one of the
functions C<is_utf8_string()>, C<is_utf8_string_loc()>, and
C<is_utf8_string_loclen()>.

=head3 New Pad API

Many new functions have been added to the API for manipulating lexical
pads.  See L<perlapi/Pad Data Structures> for more information.

=head2 Changes to Special Variables

=head3 C<$$> can be assigned to

C<$$> was made read-only in Perl 5.8.0.  But only sometimes: C<local $$>
would make it writable again.  Some CPAN modules were using C<local $$> or
XS code to bypass the read-only check, so there is no reason to keep C<$$>
read-only.  (This change also allowed a bug to be fixed while maintaining
backward compatibility.)

=head3 C<$^X> converted to an absolute path on FreeBSD, OS X and Solaris

C<$^X> is now converted to an absolute path on OS X, FreeBSD (without
needing F</proc> mounted) and Solaris 10 and 11.  This augments the
previous approach of using F</proc> on Linux, FreeBSD, and NetBSD
(in all cases, where mounted).

This makes relocatable perl installations more useful on these platforms.
(See "Relocatable @INC" in F<INSTALL>)

=head2 Debugger Changes

=head3 Features inside the debugger

The current Perl's L<feature> bundle is now enabled for commands entered
in the interactive debugger.

=head3 New option for the debugger's B<t> command

The B<t> command in the debugger, which toggles tracing mode, now
accepts a numeric argument that determines how many levels of subroutine
calls to trace.

=head3 C<enable> and C<disable>

The debugger now has C<disable> and C<enable> commands for disabling
existing breakpoints and re-enabling them.  See L<perldebug>.

=head3 Breakpoints with file names

The debugger's "b" command for setting breakpoints now lets a line
number be prefixed with a file name.  See
L<perldebug/"b [file]:[line] [condition]">.

=head2 The C<CORE> Namespace

=head3 The C<CORE::> prefix

The C<CORE::> prefix can now be used on keywords enabled by
L<feature.pm|feature>, even outside the scope of C<use feature>.

=head3 Subroutines in the C<CORE> namespace

Many Perl keywords are now available as subroutines in the CORE namespace.
This lets them be aliased:

BEGIN { *entangle = \&CORE::tie }
    entangle $variable, $package, @args;

And for prototypes to be bypassed:

sub mytie(\[%$*@]$@) {
	my ($ref, $pack, @args) = @_;
	... do something ...
	goto &CORE::tie;
    }

Some of these cannot be called through references or via C<&foo> syntax,
but must be called as barewords.

See L<CORE> for details.

=head2 Other Changes

=head3 Anonymous handles

Automatically generated file handles are now named __ANONIO__ when the
variable name cannot be determined, rather than $__ANONIO__.

=head3 Autoloaded sort Subroutines

Custom sort subroutines can now be autoloaded [perl #30661]:

sub AUTOLOAD { ... }
    @sorted = sort foo @list; # uses AUTOLOAD

=head3 C<continue> no longer requires the "switch" feature

The C<continue> keyword has two meanings.  It can introduce a C<continue>
block after a loop, or it can exit the current C<when> block.  Up to now,
the latter meaning was valid only with the "switch" feature enabled, and
was a syntax error otherwise.  Since the main purpose of feature.pm is to
avoid conflicts with user-defined subroutines, there is no reason for
C<continue> to depend on it.

=head3 DTrace probes for interpreter phase change

The C<phase-change> probes will fire when the interpreter's phase
changes, which tracks the C<${^GLOBAL_PHASE}> variable.  C<arg0> is
the new phase name; C<arg1> is the old one.  This is useful 
for limiting your instrumentation to one or more of: compile time,
run time, or destruct time.

=head3 C<__FILE__()> Syntax

The C<__FILE__>, C<__LINE__> and C<__PACKAGE__> tokens can now be written
with an empty pair of parentheses after them.  This makes them parse the
same way as C<time>, C<fork> and other built-in functions.

=head3 The C<\$> prototype accepts any scalar lvalue

The C<\$> and C<\[$]> subroutine prototypes now accept any scalar lvalue
argument.  Previously they accepted only scalars beginning with C<$> and
hash and array elements.  This change makes them consistent with the way
the built-in C<read> and C<recv> functions (among others) parse their
arguments.  This means that one can override the built-in functions with
custom subroutines that parse their arguments the same way.

=head3 C<_> in subroutine prototypes

The C<_> character in subroutine prototypes is now allowed before C<@> or
C<%>.

=head1 Security

=head2 Use C<is_utf8_char_buf()> and not C<is_utf8_char()>

The latter function is now deprecated because its API is insufficient to
guarantee that it doesn't read (up to 12 bytes in the worst case) beyond
the end of its input string.  See
L<is_utf8_char_buf()|/Added is_utf8_char_buf()>.

=head2 Malformed UTF-8 input could cause attempts to read beyond the end of the buffer

Two new XS-accessible functions, C<utf8_to_uvchr_buf()> and
C<utf8_to_uvuni_buf()> are now available to prevent this, and the Perl
core has been converted to use them.
See L</Internal Changes>.

=head2 C<File::Glob::bsd_glob()> memory error with GLOB_ALTDIRFUNC (CVE-2011-2728).

Calling C<File::Glob::bsd_glob> with the unsupported flag
GLOB_ALTDIRFUNC would cause an access violation / segfault.  A Perl
program that accepts a flags value from an external source could expose
itself to denial of service or arbitrary code execution attacks.  There
are no known exploits in the wild.  The problem has been corrected by
explicitly disabling all unsupported flags and setting unused function
pointers to null.  Bug reported by Clément Lecigne. (5.14.2)

=head2 Privileges are now set correctly when assigning to C<$(>

A hypothetical bug (probably unexploitable in practice) because the
incorrect setting of the effective group ID while setting C<$(> has been
fixed.  The bug would have affected only systems that have C<setresgid()>
but not C<setregid()>, but no such systems are known to exist.

=head1 Deprecations

=head2 Don't read the Unicode data base files in F<lib/unicore>

It is now deprecated to directly read the Unicode data base files.
These are stored in the F<lib/unicore> directory.  Instead, you should
use the new functions in L<Unicode::UCD>.  These provide a stable API,
and give complete information.

Perl may at some point in the future change or remove these files.  The
file which applications were most likely to have used is
F<lib/unicore/ToDigit.pl>.  L<Unicode::UCD/prop_invmap()> can be used to
get at its data instead.

=head2 XS functions C<is_utf8_char()>, C<utf8_to_uvchr()> and
C<utf8_to_uvuni()>

This function is deprecated because it could read beyond the end of the
input string.  Use the new L<is_utf8_char_buf()|/Added is_utf8_char_buf()>,
C<utf8_to_uvchr_buf()> and C<utf8_to_uvuni_buf()> instead.

=head1 Future Deprecations

This section serves as a notice of features that are I<likely> to be
removed or L<deprecated|perlpolicy/deprecated> in the next release of
perl (5.18.0).  If your code depends on these features, you should
contact the Perl 5 Porters via the L<mailing
list|http://lists.perl.org/list/perl5-porters.html> or L<perlbug> to
explain your use case and inform the deprecation process.

=head2 Core Modules

These modules may be marked as deprecated I<from the core>.  This only
means that they will no longer be installed by default with the core
distribution, but will remain available on the CPAN.

=over

=item *

CPANPLUS

=item *

Filter::Simple

=item *

PerlIO::mmap

=item *

Pod::LaTeX

=item *

Pod::Parser

=item *

SelfLoader

=item *

Text::Soundex

=item *

Thread.pm

=back

=head2 Platforms with no supporting programmers

These platforms will probably have their
special build support removed during the
5.17.0 development series.

=over

=item *

BeOS

=item *

djgpp

=item *

dgux

=item *

EPOC

=item *

MPE/iX

=item *

Rhapsody

=item *

UTS

=item *

VM/ESA

=back

=head2 Other Future Deprecations

=over

=item *

Swapping of $< and $>

For more information about this future deprecation, see L<the relevant RT
ticket|https://rt.perl.org/rt3/Ticket/Display.html?id=96212>.

=item *

sfio, stdio

Perl supports being built without PerlIO proper, using a stdio or sfio
wrapper instead.  A perl build like this will not support IO layers and
thus Unicode IO, making it rather handicapped.

PerlIO supports a C<stdio> layer if stdio use is desired, and similarly a
sfio layer could be produced.

=item *

Unescaped literal C<< "{" >> in regular expressions.

Starting with v5.20, it is planned to require a literal C<"{"> to be
escaped, for example by preceding it with a backslash.  In v5.18, a
deprecated warning message will be emitted for all such uses.  
This affects only patterns that are to match a literal C<"{">.  Other
uses of this character, such as part of a quantifier or sequence as in
those below, are completely unaffected:

/foo{3,5}/
    /\p{Alphabetic}/
    /\N{DIGIT ZERO}

Removing this will permit extensions to Perl's pattern syntax and better
error checking for existing syntax.  See L<perlre/Quantifiers> for an
example.

=item *

Revamping C<< "\Q" >> semantics in double-quotish strings when combined with other escapes.

There are several bugs and inconsistencies involving combinations
of C<\Q> and escapes like C<\x>, C<\L>, etc., within a C<\Q...\E> pair.
These need to be fixed, and doing so will necessarily change current
behavior.  The changes have not yet been settled.

=back

=head1 Incompatible Changes

=head2 Special blocks called in void context

Special blocks (C<BEGIN>, C<CHECK>, C<INIT>, C<UNITCHECK>, C<END>) are now
called in void context.  This avoids wasteful copying of the result of the
last statement [perl #108794].

=head2 The C<overloading> pragma and regexp objects

With C<no overloading>, regular expression objects returned by C<qr//> are
now stringified as "Regexp=REGEXP(0xbe600d)" instead of the regular
expression itself [perl #108780].

=head2 Two XS typemap Entries removed

Two presumably unused XS typemap entries have been removed from the
core typemap: T_DATAUNIT and T_CALLBACK.  If you are, against all odds,
a user of these, please see the instructions on how to restore them
in L<perlxstypemap>.

=head2 Unicode 6.1 has incompatibilities with Unicode 6.0

These are detailed in L</Supports (almost) Unicode 6.1> above.
You can compile this version of Perl to use Unicode 6.0.  See
L<perlunicode/Hacking Perl to work on earlier Unicode versions (for very serious hackers only)>.

=head2 Borland compiler

All support for the Borland compiler has been dropped.  The code had not
worked for a long time anyway.

=head2 Certain deprecated Unicode properties are no longer supported by default

Perl should never have exposed certain Unicode properties that are used
by Unicode internally and not meant to be publicly available.  Use of
these has generated deprecated warning messages since Perl 5.12.  The
removed properties are Other_Alphabetic,
Other_Default_Ignorable_Code_Point, Other_Grapheme_Extend,
Other_ID_Continue, Other_ID_Start, Other_Lowercase, Other_Math, and
Other_Uppercase.

Perl may be recompiled to include any or all of them; instructions are
given in
L<perluniprops/Unicode character properties that are NOT accepted by Perl>.

=head2 Dereferencing IO thingies as typeglobs

The C<*{...}> operator, when passed a reference to an IO thingy (as in
C<*{*STDIN{IO}}>), creates a new typeglob containing just that IO object.
Previously, it would stringify as an empty string, but some operators would
treat it as undefined, producing an "uninitialized" warning.
Now it stringifies as __ANONIO__ [perl #96326].

=head2 User-defined case-changing operations

This feature was deprecated in Perl 5.14, and has now been removed.
The CPAN module L<Unicode::Casing> provides better functionality without
the drawbacks that this feature had, as are detailed in the 5.14
documentation:
L<http://perldoc.perl.org/5.14.0/perlunicode.html#User-Defined-Case-Mappings-%28for-serious-hackers-only%29>

=head2 XSUBs are now 'static'

XSUB C functions are now 'static', that is, they are not visible from
outside the compilation unit.  Users can use the new C<XS_EXTERNAL(name)>
and C<XS_INTERNAL(name)> macros to pick the desired linking behavior.
The ordinary C<XS(name)> declaration for XSUBs will continue to declare
non-'static' XSUBs for compatibility, but the XS compiler,
L<ExtUtils::ParseXS> (C<xsubpp>) will emit 'static' XSUBs by default.
L<ExtUtils::ParseXS>'s behavior can be reconfigured from XS using the
C<EXPORT_XSUB_SYMBOLS> keyword.  See L<perlxs> for details.

=head2 Weakening read-only references

Weakening read-only references is no longer permitted.  It should never
have worked anyway, and could sometimes result in crashes.

=head2 Tying scalars that hold typeglobs

Attempting to tie a scalar after a typeglob was assigned to it would
instead tie the handle in the typeglob's IO slot.  This meant that it was
impossible to tie the scalar itself.  Similar problems affected C<tied> and
C<untie>: C<tied $scalar> would return false on a tied scalar if the last
thing returned was a typeglob, and C<untie $scalar> on such a tied scalar
would do nothing.

We fixed this problem before Perl 5.14.0, but it caused problems with some
CPAN modules, so we put in a deprecation cycle instead.

Now the deprecation has been removed and this bug has been fixed.  So
C<tie $scalar> will always tie the scalar, not the handle it holds.  To tie
the handle, use C<tie *$scalar> (with an explicit asterisk).  The same
applies to C<tied *$scalar> and C<untie *$scalar>.

=head2 IPC::Open3 no longer provides C<xfork()>, C<xclose_on_exec()>
and C<xpipe_anon()>

All three functions were private, undocumented, and unexported.  They do
not appear to be used by any code on CPAN.  Two have been inlined and one
deleted entirely.

=head2 C<$$> no longer caches PID

Previously, if one called fork(3) from C, Perl's
notion of C<$$> could go out of sync with what getpid() returns.  By always
fetching the value of C<$$> via getpid(), this potential bug is eliminated.
Code that depends on the caching behavior will break.  As described in
L<Core Enhancements|/C<$$> can be assigned to>,
C<$$> is now writable, but it will be reset during a
fork.

=head2 C<$$> and C<getppid()> no longer emulate POSIX semantics under LinuxThreads

The POSIX emulation of C<$$> and C<getppid()> under the obsolete
LinuxThreads implementation has been removed.
This only impacts users of Linux 2.4 and
users of Debian GNU/kFreeBSD up to and including 6.0, not the vast
majority of Linux installations that use NPTL threads.

This means that C<getppid()>, like C<$$>, is now always guaranteed to
return the OS's idea of the current state of the process, not perl's
cached version of it.

See the documentation for L<$$|perlvar/$$> for details.

=head2 C<< $< >>, C<< $> >>, C<$(> and C<$)> are no longer cached

Similarly to the changes to C<$$> and C<getppid()>, the internal
caching of C<< $< >>, C<< $> >>, C<$(> and C<$)> has been removed.

When we cached these values our idea of what they were would drift out
of sync with reality if someone (e.g., someone embedding perl) called
C<sete?[ug]id()> without updating C<PL_e?[ug]id>.  Having to deal with
this complexity wasn't worth it given how cheap the C<gete?[ug]id()>
system call is.

This change will break a handful of CPAN modules that use the XS-level
C<PL_uid>, C<PL_gid>, C<PL_euid> or C<PL_egid> variables.

The fix for those breakages is to use C<PerlProc_gete?[ug]id()> to
retrieve them (e.g., C<PerlProc_getuid()>), and not to assign to
C<PL_e?[ug]id> if you change the UID/GID/EUID/EGID.  There is no longer
any need to do so since perl will always retrieve the up-to-date
version of those values from the OS.

=head2 Which Non-ASCII characters get quoted by C<quotemeta> and C<\Q> has changed

This is unlikely to result in a real problem, as Perl does not attach
special meaning to any non-ASCII character, so it is currently
irrelevant which are quoted or not.  This change fixes bug [perl #77654] and
brings Perl's behavior more into line with Unicode's recommendations.
See L<perlfunc/quotemeta>.

=head1 Performance Enhancements

=over

=item *

Improved performance for Unicode properties in regular expressions

=for comment Can this be compacted some? -- rjbs, 2012-02-20

Matching a code point against a Unicode property is now done via a
binary search instead of linear.  This means for example that the worst
case for a 1000 item property is 10 probes instead of 1000.  This
inefficiency has been compensated for in the past by permanently storing
in a hash the results of a given probe plus the results for the adjacent
64 code points, under the theory that near-by code points are likely to
be searched for.  A separate hash was used for each mention of a Unicode
property in each regular expression.  Thus, C<qr/\p{foo}abc\p{foo}/>
would generate two hashes.  Any probes in one instance would be unknown
to the other, and the hashes could expand separately to be quite large
if the regular expression were used on many different widely-separated
code points.
Now, however, there is just one hash shared by all instances of a given
property.  This means that if C<\p{foo}> is matched against "A" in one
regular expression in a thread, the result will be known immediately to
all regular expressions, and the relentless march of using up memory is
slowed considerably.

=item *

Version declarations with the C<use> keyword (e.g., C<use 5.012>) are now
faster, as they enable features without loading F<feature.pm>.

=item *

C<local $_> is faster now, as it no longer iterates through magic that it
is not going to copy anyway.

=item *

Perl 5.12.0 sped up the destruction of objects whose classes define
empty C<DESTROY> methods (to prevent autoloading), by simply not
calling such empty methods.  This release takes this optimization a
step further, by not calling any C<DESTROY> method that begins with a
C<return> statement.  This can be useful for destructors that are only
used for debugging:

use constant DEBUG => 1;
    sub DESTROY { return unless DEBUG; ... }

Constant-folding will reduce the first statement to C<return;> if DEBUG
is set to 0, triggering this optimization.

=item *

Assigning to a variable that holds a typeglob or copy-on-write scalar
is now much faster.  Previously the typeglob would be stringified or
the copy-on-write scalar would be copied before being clobbered.

=item *

Assignment to C<substr> in void context is now more than twice its
previous speed.  Instead of creating and returning a special lvalue
scalar that is then assigned to, C<substr> modifies the original string
itself.

=item *

C<substr> no longer calculates a value to return when called in void
context.

=item *

Due to changes in L<File::Glob>, Perl's C<glob> function and its C<<
<...> >> equivalent are now much faster.  The splitting of the pattern
into words has been rewritten in C, resulting in speed-ups of 20% for
some cases.

This does not affect C<glob> on VMS, as it does not use File::Glob.

=item *

The short-circuiting operators C<&&>, C<||>, and C<//>, when chained
(such as C<$a || $b || $c>), are now considerably faster to short-circuit,
due to reduced optree traversal.

=item *

The implementation of C<s///r> makes one fewer copy of the scalar's value.

=item *

Recursive calls to lvalue subroutines in lvalue scalar context use less
memory.

=back

=head1 Modules and Pragmata

=head2 Deprecated Modules

=over

=item L<Version::Requirements>

Version::Requirements is now DEPRECATED, use L<CPAN::Meta::Requirements>,
which is a drop-in replacement.  It will be deleted from perl.git blead
in v5.17.0.

=back

=head2 New Modules and Pragmata

=over 4

=item *

L<arybase> -- this new module implements the C<$[> variable.

=item *

L<PerlIO::mmap> 0.010 has been added to the Perl core.

The C<mmap> PerlIO layer is no longer implemented by perl itself, but has
been moved out into the new L<PerlIO::mmap> module.

=back

=head2 Updated Modules and Pragmata

This is only an overview of selected module updates.  For a complete list of
updates, run:

$ corelist --diff 5.14.0 5.16.0

You can substitute your favorite version in place of 5.14.0, too.

=over 4

=item *

L<Archive::Extract> has been upgraded from version 0.48 to 0.58.

Includes a fix for FreeBSD to only use C<unzip> if it is located in
C</usr/local/bin>, as FreeBSD 9.0 will ship with a limited C<unzip> in
C</usr/bin>.

=item *

L<Archive::Tar> has been upgraded from version 1.76 to 1.82.

Adjustments to handle files >8gb (>0777777777777 octal) and a feature
to return the MD5SUM of files in the archive.

=item *

L<base> has been upgraded from version 2.16 to 2.18.

C<base> no longer sets a module's C<$VERSION> to "-1" when a module it
loads does not define a C<$VERSION>.  This change has been made because
"-1" is not a valid version number under the new "lax" criteria used
internally by C<UNIVERSAL::VERSION>.  (See L<version> for more on "lax"
version criteria.)

C<base> no longer internally skips loading modules it has already loaded
and instead relies on C<require> to inspect C<%INC>.  This fixes a bug
when C<base> is used with code that clear C<%INC> to force a module to
be reloaded.

=item *

L<Carp> has been upgraded from version 1.20 to 1.26.

It now includes last read filehandle info and puts a dot after the file
and line number, just like errors from C<die> [perl #106538].

=item *

L<charnames> has been updated from version 1.18 to 1.30.

C<charnames> can now be invoked with a new option, C<:loose>,
which is like the existing C<:full> option, but enables Unicode loose
name matching.  Details are in L<charnames/LOOSE MATCHES>.

=item *

L<B::Deparse> has been upgraded from version 1.03 to 1.14.  This fixes
numerous deparsing bugs.

=item *

L<CGI> has been upgraded from version 3.52 to 3.59.

It uses the public and documented FCGI.pm API in CGI::Fast.  CGI::Fast was
using an FCGI API that was deprecated and removed from documentation
more than ten years ago.  Usage of this deprecated API with FCGI E<gt>=
0.70 or FCGI E<lt>= 0.73 introduces a security issue.
L<https://rt.cpan.org/Public/Bug/Display.html?id=68380>
L<http://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2011-2766>

Things that may break your code:

C<url()> was fixed to return C<PATH_INFO> when it is explicitly requested
with either the C<path=E<gt>1> or C<path_info=E<gt>1> flag.

If your code is running under mod_rewrite (or compatible) and you are
calling C<self_url()> or you are calling C<url()> and passing
C<path_info=E<gt>1>, these methods will actually be returning
C<PATH_INFO> now, as you have explicitly requested or C<self_url()>
has requested on your behalf.

The C<PATH_INFO> has been omitted in such URLs since the issue was
introduced in the 3.12 release in December, 2005.

This bug is so old your application may have come to depend on it or
workaround it. Check for application before upgrading to this release.

Examples of affected method calls:

$q->url(-absolute => 1, -query => 1, -path_info => 1);
  $q->url(-path=>1);
  $q->url(-full=>1,-path=>1);
  $q->url(-rewrite=>1,-path=>1);
  $q->self_url();

We no longer read from STDIN when the Content-Length is not set,
preventing requests with no Content-Length from sometimes freezing.
This is consistent with the CGI RFC 3875, and is also consistent with
CGI::Simple.  However, the old behavior may have been expected by some
command-line uses of CGI.pm.

In addition, the DELETE HTTP verb is now supported.

=item *

L<Compress::Zlib> has been upgraded from version 2.035 to 2.048.

IO::Compress::Zip and IO::Uncompress::Unzip now have support for LZMA
(method 14).  There is a fix for a CRC issue in IO::Compress::Unzip and
it supports Streamed Stored context now.  And fixed a Zip64 issue in
IO::Compress::Zip when the content size was exactly 0xFFFFFFFF.

=item *

L<Digest::SHA> has been upgraded from version 5.61 to 5.71.

Added BITS mode to the addfile method and shasum.  This makes
partial-byte inputs possible via files/STDIN and lets shasum check
all 8074 NIST Msg vectors, where previously special programming was
required to do this.

=item *

L<Encode> has been upgraded from version 2.42 to 2.44.

Missing aliases added, a deep recursion error fixed and various
documentation updates.

Addressed 'decode_xs n-byte heap-overflow' security bug in Unicode.xs
(CVE-2011-2939). (5.14.2)

=item *

L<ExtUtils::CBuilder> updated from version 0.280203 to 0.280206.

The new version appends CFLAGS and LDFLAGS to their Config.pm
counterparts.

=item *

L<ExtUtils::ParseXS> has been upgraded from version 2.2210 to 3.16.

Much of L<ExtUtils::ParseXS>, the module behind the XS compiler C<xsubpp>,
was rewritten and cleaned up.  It has been made somewhat more extensible
and now finally uses strictures.

The typemap logic has been moved into a separate module,
L<ExtUtils::Typemaps>.  See L</New Modules and Pragmata>, above.

For a complete set of changes, please see the ExtUtils::ParseXS
changelog, available on the CPAN.

=item *

L<File::Glob> has been upgraded from version 1.12 to 1.17.

On Windows, tilde (~) expansion now checks the C<USERPROFILE> environment
variable, after checking C<HOME>.

It has a new C<:bsd_glob> export tag, intended to replace C<:glob>.  Like
C<:glob> it overrides C<glob> with a function that does not split the glob
pattern into words, but, unlike C<:glob>, it iterates properly in scalar
context, instead of returning the last file.

There are other changes affecting Perl's own C<glob> operator (which uses
File::Glob internally, except on VMS).  See L</Performance Enhancements>
and L</Selected Bug Fixes>.

=item *

L<FindBin> updated from version 1.50 to 1.51.

It no longer returns a wrong result if a script of the same name as the
current one exists in the path and is executable.

=item *

L<HTTP::Tiny> has been upgraded from version 0.012 to 0.017.

Added support for using C<$ENV{http_proxy}> to set the default proxy host.

Adds additional shorthand methods for all common HTTP verbs,
a C<post_form()> method for POST-ing x-www-form-urlencoded data and
a C<www_form_urlencode()> utility method.

=item *

L<IO> has been upgraded from version 1.25_04 to 1.25_06, and L<IO::Handle>
from version 1.31 to 1.33.

Together, these upgrades fix a problem with IO::Handle's C<getline> and
C<getlines> methods.  When these methods are called on the special ARGV
handle, the next file is automatically opened, as happens with the built-in
C<E<lt>E<gt>> and C<readline> functions.  But, unlike the built-ins, these
methods were not respecting the caller's use of the L<open> pragma and
applying the appropriate I/O layers to the newly-opened file
[rt.cpan.org #66474].

=item *

L<IPC::Cmd> has been upgraded from version 0.70 to 0.76.

Capturing of command output (both C<STDOUT> and C<STDERR>) is now supported
using L<IPC::Open3> on MSWin32 without requiring L<IPC::Run>.

=item *

L<IPC::Open3> has been upgraded from version 1.09 to 1.12.

Fixes a bug which prevented use of C<open3> on Windows when C<*STDIN>,
C<*STDOUT> or C<*STDERR> had been localized.

Fixes a bug which prevented duplicating numeric file descriptors on Windows.

C<open3> with "-" for the program name works once more.  This was broken in
version 1.06 (and hence in Perl 5.14.0) [perl #95748].

=item *

L<Locale::Codes> has been upgraded from version 3.16 to 3.21.

Added Language Extension codes (langext) and Language Variation codes (langvar)
as defined in the IANA language registry.

Added language codes from ISO 639-5

Added language/script codes from the IANA language subtag registry

Fixed an uninitialized value warning [rt.cpan.org #67438].

Fixed the return value for the all_XXX_codes and all_XXX_names functions
[rt.cpan.org #69100].

Reorganized modules to move Locale::MODULE to Locale::Codes::MODULE to allow
for cleaner future additions.  The original four modules (Locale::Language,
Locale::Currency, Locale::Country, Locale::Script) will continue to work, but
all new sets of codes will be added in the Locale::Codes namespace.

The code2XXX, XXX2code, all_XXX_codes, and all_XXX_names functions now
support retired codes.  All codesets may be specified by a constant or
by their name now.  Previously, they were specified only by a constant.

The alias_code function exists for backward compatibility.  It has been
replaced by rename_country_code.  The alias_code function will be
removed some time after September, 2013.

All work is now done in the central module (Locale::Codes).  Previously,
some was still done in the wrapper modules (Locale::Codes::*).  Added
Language Family codes (langfam) as defined in ISO 639-5.

=item *

L<Math::BigFloat> has been upgraded from version 1.993 to 1.997.

The C<numify> method has been corrected to return a normalized Perl number
(the result of C<0 + $thing>), instead of a string [rt.cpan.org #66732].

=item *

L<Math::BigInt> has been upgraded from version 1.994 to 1.998.

It provides a new C<bsgn> method that complements the C<babs> method.

It fixes the internal C<objectify> function's handling of "foreign objects"
so they are converted to the appropriate class (Math::BigInt or
Math::BigFloat).

=item *

L<Math::BigRat> has been upgraded from version 0.2602 to 0.2603.

C<int()> on a Math::BigRat object containing -1/2 now creates a
Math::BigInt containing 0, rather than -0.  L<Math::BigInt> does not even
support negative zero, so the resulting object was actually malformed
[perl #95530].

=item *

L<Math::Complex> has been upgraded from version 1.56 to 1.59
and L<Math::Trig> from version 1.2 to 1.22.

Fixes include: correct copy constructor usage; fix polarwise formatting with
numeric format specifier; and more stable C<great_circle_direction> algorithm.

=item *

L<Module::CoreList> has been upgraded from version 2.51 to 2.66.

The C<corelist> utility now understands the C<-r> option for displaying
Perl release dates and the C<--diff> option to print the set of modlib
changes between two perl distributions.

=item *

L<Module::Metadata> has been upgraded from version 1.000004 to 1.000009.

Adds C<provides> method to generate a CPAN META provides data structure
correctly; use of C<package_versions_from_directory> is discouraged.

=item *

L<ODBM_File> has been upgraded from version 1.10 to 1.12.

The XS code is now compiled with C<PERL_NO_GET_CONTEXT>, which will aid
performance under ithreads.

=item *

L<open> has been upgraded from version 1.08 to 1.10.

It no longer turns off layers on standard handles when invoked without the
":std" directive.  Similarly, when invoked I<with> the ":std" directive, it
now clears layers on STDERR before applying the new ones, and not just on
STDIN and STDOUT [perl #92728].

=item *

L<overload> has been upgraded from version 1.13 to 1.18.

C<overload::Overloaded> no longer calls C<can> on the class, but uses
another means to determine whether the object has overloading.  It was
never correct for it to call C<can>, as overloading does not respect
AUTOLOAD.  So classes that autoload methods and implement C<can> no longer
have to account for overloading [perl #40333].

A warning is now produced for invalid arguments.  See L</New Diagnostics>.

=item *

L<PerlIO::scalar> has been upgraded from version 0.11 to 0.14.

(This is the module that implements C<< open $fh, '>', \$scalar >>.)

It fixes a problem with C<< open my $fh, ">", \$scalar >> not working if
C<$scalar> is a copy-on-write scalar. (5.14.2)

It also fixes a hang that occurs with C<readline> or C<< <$fh> >> if a
typeglob has been assigned to $scalar [perl #92258].

It no longer assumes during C<seek> that $scalar is a string internally.
If it didn't crash, it was close to doing so [perl #92706].  Also, the
internal print routine no longer assumes that the position set by C<seek>
is valid, but extends the string to that position, filling the intervening
bytes (between the old length and the seek position) with nulls
[perl #78980].

Printing to an in-memory handle now works if the $scalar holds a reference,
stringifying the reference before modifying it.  References used to be
treated as empty strings.

Printing to an in-memory handle no longer crashes if the $scalar happens to
hold a number internally, but no string buffer.

Printing to an in-memory handle no longer creates scalars that confuse
the regular expression engine [perl #108398].

=item *

L<Pod::Functions> has been upgraded from version 1.04 to 1.05.

F<Functions.pm> is now generated at perl build time from annotations in
F<perlfunc.pod>.  This will ensure that L<Pod::Functions> and L<perlfunc>
remain in synchronisation.

=item *

L<Pod::Html> has been upgraded from version 1.11 to 1.1502.

This is an extensive rewrite of Pod::Html to use L<Pod::Simple> under
the hood.  The output has changed significantly.

=item *

L<Pod::Perldoc> has been upgraded from version 3.15_03 to 3.17.

It corrects the search paths on VMS [perl #90640]. (5.14.1)

The B<-v> option now fetches the right section for C<$0>.

This upgrade has numerous significant fixes.  Consult its changelog on
the CPAN for more information.

=item *

L<POSIX> has been upgraded from version 1.24 to 1.30.

L<POSIX> no longer uses L<AutoLoader>.  Any code which was relying on this
implementation detail was buggy, and may fail because of this change.
The module's Perl code has been considerably simplified, roughly halving
the number of lines, with no change in functionality.  The XS code has
been refactored to reduce the size of the shared object by about 12%,
with no change in functionality.  More POSIX functions now have tests.

C<sigsuspend> and C<pause> now run signal handlers before returning, as the
whole point of these two functions is to wait until a signal has
arrived, and then return I<after> it has been triggered.  Delayed, or
"safe", signals were preventing that from happening, possibly resulting in
race conditions [perl #107216].

C<POSIX::sleep> is now a direct call into the underlying OS C<sleep>
function, instead of being a Perl wrapper on C<CORE::sleep>.
C<POSIX::dup2> now returns the correct value on Win32 (I<i.e.>, the file
descriptor).  C<POSIX::SigSet> C<sigsuspend> and C<sigpending> and
C<POSIX::pause> now dispatch safe signals immediately before returning to
their caller.

C<POSIX::Termios::setattr> now defaults the third argument to C<TCSANOW>,
instead of 0. On most platforms C<TCSANOW> is defined to be 0, but on some
0 is not a valid parameter, which caused a call with defaults to fail.

=item *

L<Socket> has been upgraded from version 1.94 to 2.001.

It has new functions and constants for handling IPv6 sockets:

pack_ipv6_mreq
    unpack_ipv6_mreq
    IPV6_ADD_MEMBERSHIP
    IPV6_DROP_MEMBERSHIP
    IPV6_MTU
    IPV6_MTU_DISCOVER
    IPV6_MULTICAST_HOPS
    IPV6_MULTICAST_IF
    IPV6_MULTICAST_LOOP
    IPV6_UNICAST_HOPS
    IPV6_V6ONLY

=item *

L<Storable> has been upgraded from version 2.27 to 2.34.

It no longer turns copy-on-write scalars into read-only scalars when
freezing and thawing.

=item *

L<Sys::Syslog> has been upgraded from version 0.27 to 0.29.

This upgrade closes many outstanding bugs.

=item *

L<Term::ANSIColor> has been upgraded from version 3.00 to 3.01.

Only interpret an initial array reference as a list of colors, not any initial
reference, allowing the colored function to work properly on objects with
stringification defined.

=item *

L<Term::ReadLine> has been upgraded from version 1.07 to 1.09.

Term::ReadLine now supports any event loop, including unpublished ones and
simple L<IO::Select>, loops without the need to rewrite existing code for
any particular framework [perl #108470].

=item *

L<threads::shared> has been upgraded from version 1.37 to 1.40.

Destructors on shared objects used to be ignored sometimes if the objects
were referenced only by shared data structures.  This has been mostly
fixed, but destructors may still be ignored if the objects still exist at
global destruction time [perl #98204].

=item *

L<Unicode::Collate> has been upgraded from version 0.73 to 0.89.

Updated to CLDR 1.9.1

Locales updated to CLDR 2.0: mk, mt, nb, nn, ro, ru, sk, sr, sv, uk,
zh__pinyin, zh__stroke

Newly supported locales: bn, fa, ml, mr, or, pa, sa, si, si__dictionary,
sr_Latn, sv__reformed, ta, te, th, ur, wae.

Tailored compatibility ideographs as well as unified ideographs for the
locales: ja, ko, zh__big5han, zh__gb2312han, zh__pinyin, zh__stroke.

Locale/*.pl files are now searched for in @INC.

=item *

L<Unicode::Normalize> has been upgraded from version 1.10 to 1.14.

Fixes for the removal of F<unicore/CompositionExclusions.txt> from core.

=item *

L<Unicode::UCD> has been upgraded from version 0.32 to 0.43.

This adds four new functions:  C<prop_aliases()> and
C<prop_value_aliases()>, which are used to find all Unicode-approved
synonyms for property names, or to convert from one name to another;
C<prop_invlist> which returns all code points matching a given
Unicode binary property; and C<prop_invmap> which returns the complete
specification of a given Unicode property.

=item *

L<Win32API::File> has been upgraded from version 0.1101 to 0.1200.

Added SetStdHandle and GetStdHandle functions

=back

=head2 Removed Modules and Pragmata

As promised in Perl 5.14.0's release notes, the following modules have
been removed from the core distribution, and if needed should be installed
from CPAN instead.

=over

=item *

L<Devel::DProf> has been removed from the Perl core.  Prior version was
20110228.00.

=item *

L<Shell> has been removed from the Perl core.  Prior version was 0.72_01.

=item *

Several old perl4-style libraries which have been deprecated with 5.14
are now removed:

abbrev.pl assert.pl bigfloat.pl bigint.pl bigrat.pl cacheout.pl
    complete.pl ctime.pl dotsh.pl exceptions.pl fastcwd.pl flush.pl
    getcwd.pl getopt.pl getopts.pl hostname.pl importenv.pl
    lib/find{,depth}.pl look.pl newgetopt.pl open2.pl open3.pl
    pwd.pl shellwords.pl stat.pl tainted.pl termcap.pl timelocal.pl

They can be found on CPAN as L<Perl4::CoreLibs>.

=back

=head1 Documentation

=head2 New Documentation

=head3 L<perldtrace>

L<perldtrace> describes Perl's DTrace support, listing the provided probes
and gives examples of their use.

=head3 L<perlexperiment>

This document is intended to provide a list of experimental features in
Perl.  It is still a work in progress.

=head3 L<perlootut>

This a new OO tutorial.  It focuses on basic OO concepts, and then recommends
that readers choose an OO framework from CPAN.

=head3 L<perlxstypemap>

The new manual describes the XS typemapping mechanism in unprecedented
detail and combines new documentation with information extracted from
L<perlxs> and the previously unofficial list of all core typemaps.

=head2 Changes to Existing Documentation

=head3 L<perlapi>

=over 4

=item *

The HV API has long accepted negative lengths to show that the key is
in UTF8.  This is now documented.

=item *

The C<boolSV()> macro is now documented.

=back

=head3 L<perlfunc>

=over 4

=item *

C<dbmopen> treats a 0 mode as a special case, that prevents a nonexistent
file from being created.  This has been the case since Perl 5.000, but was
never documented anywhere.  Now the perlfunc entry mentions it
[perl #90064].

=item *

As an accident of history, C<open $fh, '<:', ...> applies the default
layers for the platform (C<:raw> on Unix, C<:crlf> on Windows), ignoring
whatever is declared by L<open.pm|open>.  This seems such a useful feature
it has been documented in L<perlfunc|perlfunc/open> and L<open>.

=item *

The entry for C<split> has been rewritten.  It is now far clearer than
before.

=back

=head3 L<perlguts>

=over 4

=item *

A new section, L<Autoloading with XSUBs|perlguts/Autoloading with XSUBs>,
has been added, which explains the two APIs for accessing the name of the
autoloaded sub.

=item *

Some function descriptions in L<perlguts> were confusing, as it was
not clear whether they referred to the function above or below the
description.  This has been clarified [perl #91790].

=back

=head3 L<perlobj>

=over 4

=item *

This document has been rewritten from scratch, and its coverage of various OO
concepts has been expanded.

=back

=head3 L<perlop>

=over 4

=item *

Documentation of the smartmatch operator has been reworked and moved from
perlsyn to perlop where it belongs.

It has also been corrected for the case of C<undef> on the left-hand
side.  The list of different smart match behaviors had an item in the
wrong place.

=item *

Documentation of the ellipsis statement (C<...>) has been reworked and
moved from perlop to perlsyn.

=item *

The explanation of bitwise operators has been expanded to explain how they
work on Unicode strings (5.14.1).

=item *

More examples for C<m//g> have been added (5.14.1).

=item *

The C<<< <<\FOO >>> here-doc syntax has been documented (5.14.1).

=back

=head3 L<perlpragma>

=over 4

=item *

There is now a standard convention for naming keys in the C<%^H>,
documented under L<Key naming|perlpragma/Key naming>.

=back

=head3 L<perlsec/Laundering and Detecting Tainted Data>

=over 4

=item *

The example function for checking for taintedness contained a subtle
error.  C<$@> needs to be localized to prevent its changing this
global's value outside the function.  The preferred method to check for
this remains L<Scalar::Util/tainted>.

=back

=head3 L<perllol>

=over

=item *

L<perllol> has been expanded with examples using the new C<push $scalar>
syntax introduced in Perl 5.14.0 (5.14.1).

=back

=head3 L<perlmod>

=over

=item *

L<perlmod> now states explicitly that some types of explicit symbol table
manipulation are not supported.  This codifies what was effectively already
the case [perl #78074].

=back

=head3 L<perlpodstyle>

=over 4

=item *

The tips on which formatting codes to use have been corrected and greatly
expanded.

=item *

There are now a couple of example one-liners for previewing POD files after
they have been edited.

=back

=head3 L<perlre>

=over

=item *

The C<(*COMMIT)> directive is now listed in the right section
(L<Verbs without an argument|perlre/Verbs without an argument>).

=back

=head3 L<perlrun>

=over

=item *

L<perlrun> has undergone a significant clean-up.  Most notably, the
B<-0x...> form of the B<-0> flag has been clarified, and the final section
on environment variables has been corrected and expanded (5.14.1).

=back

=head3 L<perlsub>

=over

=item *

The ($;) prototype syntax, which has existed for rather a long time, is now
documented in L<perlsub>.  It lets a unary function have the same
precedence as a list operator.

=back

=head3 L<perltie>

=over

=item *

The required syntax for tying handles has been documented.

=back

=head3 L<perlvar>

=over

=item *

The documentation for L<$!|perlvar/$!> has been corrected and clarified.
It used to state that $! could be C<undef>, which is not the case.  It was
also unclear whether system calls set C's C<errno> or Perl's C<$!>
[perl #91614].

=item *

Documentation for L<$$|perlvar/$$> has been amended with additional
cautions regarding changing the process ID.

=back

=head3 Other Changes

=over 4

=item *

L<perlxs> was extended with documentation on inline typemaps.

=item *

L<perlref> has a new L<Circular References|perlref/Circular References>
section explaining how circularities may not be freed and how to solve that
with weak references.

=item *

Parts of L<perlapi> were clarified, and Perl equivalents of some C
functions have been added as an additional mode of exposition.

=item *

A few parts of L<perlre> and L<perlrecharclass> were clarified.

=back

=head2 Removed Documentation

=head3 Old OO Documentation

The old OO tutorials, perltoot, perltooc, and perlboot, have been
removed.  The perlbot (bag of object tricks) document has been removed
as well.

=head3 Development Deltas

The perldelta files for development releases are no longer packaged with
perl.  These can still be found in the perl source code repository.

=head1 Diagnostics

The following additions or changes have been made to diagnostic output,
including warnings and fatal error messages.  For the complete list of
diagnostic messages, see L<perldiag>.

=head2 New Diagnostics

=head3 New Errors

=over 4

=item *

L<Cannot set tied @DB::args|perldiag/"Cannot set tied @DB::args">

This error occurs when C<caller> tries to set C<@DB::args> but finds it
tied.  Before this error was added, it used to crash instead.

=item *

L<Cannot tie unreifiable array|perldiag/"Cannot tie unreifiable array">

This error is part of a safety check that the C<tie> operator does before
tying a special array like C<@_>.  You should never see this message.

=item *

L<&CORE::%s cannot be called directly|perldiag/"&CORE::%s cannot be called directly">

This occurs when a subroutine in the C<CORE::> namespace is called
with C<&foo> syntax or through a reference.  Some subroutines
in this package cannot yet be called that way, but must be
called as barewords.  See L</Subroutines in the C<CORE> namespace>, above.

=item *

L<Source filters apply only to byte streams|perldiag/"Source filters apply only to byte streams">

This new error occurs when you try to activate a source filter (usually by
loading a source filter module) within a string passed to C<eval> under the
C<unicode_eval> feature.

=back

=head3 New Warnings

=over 4

=item *

L<defined(@array) is deprecated|perldiag/"defined(@array) is deprecated">

The long-deprecated C<defined(@array)> now also warns for package variables.
Previously it issued a warning for lexical variables only.

=item *

L<length() used on %s|perldiag/length() used on %s>

This new warning occurs when C<length> is used on an array or hash, instead
of C<scalar(@array)> or C<scalar(keys %hash)>.

=item *

L<lvalue attribute %s already-defined subroutine|perldiag/"lvalue attribute %s already-defined subroutine">

L<attributes.pm|attributes> now emits this warning when the :lvalue
attribute is applied to a Perl subroutine that has already been defined, as
doing so can have unexpected side-effects.

=item *

L<overload arg '%s' is invalid|perldiag/"overload arg '%s' is invalid">

This warning, in the "overload" category, is produced when the overload
pragma is given an argument it doesn't recognize, presumably a mistyped
operator.

=item *

L<$[ used in %s (did you mean $] ?)|perldiag/"$[ used in %s (did you mean $] ?)">

This new warning exists to catch the mistaken use of C<$[> in version
checks.  C<$]>, not C<$[>, contains the version number.

=item *

L<Useless assignment to a temporary|perldiag/"Useless assignment to a temporary">

Assigning to a temporary scalar returned
from an lvalue subroutine now produces this
warning [perl #31946].

=item *

L<Useless use of \E|perldiag/"Useless use of \E">

C<\E> does nothing unless preceded by C<\Q>, C<\L> or C<\U>.

=back

=head2 Removed Errors

=over

=item *

"sort is now a reserved word"

This error used to occur when C<sort> was called without arguments,
followed by C<;> or C<)>.  (E.g., C<sort;> would die, but C<{sort}> was
OK.)  This error message was added in Perl 3 to catch code like
C<close(sort)> which would no longer work.  More than two decades later,
this message is no longer appropriate.  Now C<sort> without arguments is
always allowed, and returns an empty list, as it did in those cases
where it was already allowed [perl #90030].

=back

=head2 Changes to Existing Diagnostics

=over 4

=item *

The "Applying pattern match..." or similar warning produced when an
array or hash is on the left-hand side of the C<=~> operator now
mentions the name of the variable.

=item *

The "Attempt to free non-existent shared string" has had the spelling
of "non-existent" corrected to "nonexistent".  It was already listed
with the correct spelling in L<perldiag>.

=item *

The error messages for using C<default> and C<when> outside a
topicalizer have been standardized to match the messages for C<continue>
and loop controls.  They now read 'Can't "default" outside a
topicalizer' and 'Can't "when" outside a topicalizer'.  They both used
to be 'Can't use when() outside a topicalizer' [perl #91514].

=item *

The message, "Code point 0x%X is not Unicode, no properties match it;
all inverse properties do" has been changed to "Code point 0x%X is not
Unicode, all \p{} matches fail; all \P{} matches succeed".

=item *

Redefinition warnings for constant subroutines used to be mandatory,
even occurring under C<no warnings>.  Now they respect the L<warnings>
pragma.

=item *

The "glob failed" warning message is now suppressible via C<no warnings>
[perl #111656].

=item *

The L<Invalid version format|perldiag/"Invalid version format (%s)">
error message now says "negative version number" within the parentheses,
rather than "non-numeric data", for negative numbers.

=item *

The two warnings
L<Possible attempt to put comments in qw() list|perldiag/"Possible attempt to put comments in qw() list">
and
L<Possible attempt to separate words with commas|perldiag/"Possible attempt to separate words with commas">
are no longer mutually exclusive: the same C<qw> construct may produce
both.

=item *

The uninitialized warning for C<y///r> when C<$_> is implicit and
undefined now mentions the variable name, just like the non-/r variation
of the operator.

=item *

The 'Use of "foo" without parentheses is ambiguous' warning has been
extended to apply also to user-defined subroutines with a (;$)
prototype, and not just to built-in functions.

=item *

Warnings that mention the names of lexical (C<my>) variables with
Unicode characters in them now respect the presence or absence of the
C<:utf8> layer on the output handle, instead of outputting UTF8
regardless.  Also, the correct names are included in the strings passed
to C<$SIG{__WARN__}> handlers, rather than the raw UTF8 bytes.

=back

=head1 Utility Changes

=head3 L<h2ph>

=over 4

=item *

L<h2ph> used to generate code of the form

unless(defined(&FOO)) {
    sub FOO () {42;}
  }

But the subroutine is a compile-time declaration, and is hence unaffected
by the condition.  It has now been corrected to emit a string C<eval>
around the subroutine [perl #99368].

=back

=head3 L<splain>

=over 4

=item *

F<splain> no longer emits backtraces with the first line number repeated.

This:

Uncaught exception from user code:
            Cannot fwiddle the fwuddle at -e line 1.
     at -e line 1
            main::baz() called at -e line 1
            main::bar() called at -e line 1
            main::foo() called at -e line 1

has become this:

Uncaught exception from user code:
            Cannot fwiddle the fwuddle at -e line 1.
            main::baz() called at -e line 1
            main::bar() called at -e line 1
            main::foo() called at -e line 1

=item *

Some error messages consist of multiple lines that are listed as separate
entries in L<perldiag>.  splain has been taught to find the separate
entries in these cases, instead of simply failing to find the message.

=back

=head3 L<zipdetails>

=over 4

=item *

This is a new utility, included as part of an
L<IO::Compress::Base> upgrade.

L<zipdetails> displays information about the internal record structure
of the zip file.  It is not concerned with displaying any details of
the compressed data stored in the zip file.

=back

=head1 Configuration and Compilation

=over 4

=item *

F<regexp.h> has been modified for compatibility with GCC's B<-Werror>
option, as used by some projects that include perl's header files (5.14.1).

=item *

C<USE_LOCALE{,_COLLATE,_CTYPE,_NUMERIC}> have been added the output of perl -V
as they have affect the behavior of the interpreter binary (albeit
in only a small area).

=item *

The code and tests for L<IPC::Open2> have been moved from F<ext/IPC-Open2>
into F<ext/IPC-Open3>, as C<IPC::Open2::open2()> is implemented as a thin
wrapper around C<IPC::Open3::_open3()>, and hence is very tightly coupled to
it.

=item *

The magic types and magic vtables are now generated from data in a new script
F<regen/mg_vtable.pl>, instead of being maintained by hand.  As different
EBCDIC variants can't agree on the code point for '~', the character to code
point conversion is done at build time by F<generate_uudmap> to a new generated
header F<mg_data.h>.  C<PL_vtbl_bm> and C<PL_vtbl_fm> are now defined by the
pre-processor as C<PL_vtbl_regexp>, instead of being distinct C variables.
C<PL_vtbl_sig> has been removed.

=item *

Building with C<-DPERL_GLOBAL_STRUCT> works again.  This configuration is not
generally used.

=item *

Perl configured with I<MAD> now correctly frees C<MADPROP> structures when
OPs are freed.  C<MADPROP>s are now allocated with C<PerlMemShared_malloc()>

=item *

F<makedef.pl> has been refactored.  This should have no noticeable affect on
any of the platforms that use it as part of their build (AIX, VMS, Win32).

=item *

C<useperlio> can no longer be disabled.

=item *

The file F<global.sym> is no longer needed, and has been removed.  It
contained a list of all exported functions, one of the files generated by
F<regen/embed.pl> from data in F<embed.fnc> and F<regen/opcodes>.  The code
has been refactored so that the only user of F<global.sym>, F<makedef.pl>,
now reads F<embed.fnc> and F<regen/opcodes> directly, removing the need to
store the list of exported functions in an intermediate file.

As F<global.sym> was never installed, this change should not be visible
outside the build process.

=item *

F<pod/buildtoc>, used by the build process to build L<perltoc>, has been
refactored and simplified.  It now contains only code to build L<perltoc>;
the code to regenerate Makefiles has been moved to F<Porting/pod_rules.pl>.
It's a bug if this change has any material effect on the build process.

=item *

F<pod/roffitall> is now built by F<pod/buildtoc>, instead of being
shipped with the distribution.  Its list of manpages is now generated
(and therefore current).  See also RT #103202 for an unresolved related
issue.

=item *

The man page for C<XS::Typemap> is no longer installed.  C<XS::Typemap>
is a test module which is not installed, hence installing its
documentation makes no sense.

=item *

The -Dusesitecustomize and -Duserelocatableinc options now work
together properly.

=back

=head1 Platform Support

=head2 Platform-Specific Notes

=head3 Cygwin

=over 4

=item *

Since version 1.7, Cygwin supports native UTF-8 paths.  If Perl is built
under that environment, directory and filenames will be UTF-8 encoded.

=item *

Cygwin does not initialize all original Win32 environment variables.  See
F<README.cygwin> for a discussion of the newly-added
C<Cygwin::sync_winenv()> function [perl #110190] and for
further links.

=back

=head3 HP-UX

=over 4

=item *

HP-UX PA-RISC/64 now supports gcc-4.x

A fix to correct the socketsize now makes the test suite pass on HP-UX
PA-RISC for 64bitall builds. (5.14.2)

=back

=head3 VMS

=over 4

=item *

Remove unnecessary includes, fix miscellaneous compiler warnings and
close some unclosed comments on F<vms/vms.c>.

=item *

Remove sockadapt layer from the VMS build.

=item *

Explicit support for VMS versions before v7.0 and DEC C versions
before v6.0 has been removed.

=item *

Since Perl 5.10.1, the home-grown C<stat> wrapper has been unable to
distinguish between a directory name containing an underscore and an
otherwise-identical filename containing a dot in the same position
(e.g., t/test_pl as a directory and t/test.pl as a file).  This problem
has been corrected.

=item *

The build on VMS now permits names of the resulting symbols in C code for
Perl longer than 31 characters.  Symbols like
C<Perl__it_was_the_best_of_times_it_was_the_worst_of_times> can now be
created freely without causing the VMS linker to seize up.

=back

=head3 GNU/Hurd

=over 4

=item *

Numerous build and test failures on GNU/Hurd have been resolved with hints
for building DBM modules, detection of the library search path, and enabling
of large file support.

=back

=head3 OpenVOS

=over 4

=item *

Perl is now built with dynamic linking on OpenVOS, the minimum supported
version of which is now Release 17.1.0.

=back

=head3 SunOS

The CC workshop C++ compiler is now detected and used on systems that ship
without cc.

=head1 Internal Changes

=over 4

=item *

The compiled representation of formats is now stored via the C<mg_ptr> of
their C<PERL_MAGIC_fm>.  Previously it was stored in the string buffer,
beyond C<SvLEN()>, the regular end of the string.  C<SvCOMPILED()> and
C<SvCOMPILED_{on,off}()> now exist solely for compatibility for XS code.
The first is always 0, the other two now no-ops. (5.14.1)

=item *

Some global variables have been marked C<const>, members in the interpreter
structure have been re-ordered, and the opcodes have been re-ordered.  The
op C<OP_AELEMFAST> has been split into C<OP_AELEMFAST> and C<OP_AELEMFAST_LEX>.

=item *

When empting a hash of its elements (e.g., via undef(%h), or %h=()), HvARRAY
field is no longer temporarily zeroed.  Any destructors called on the freed
elements see the remaining elements.  Thus, %h=() becomes more like
C<delete $h{$_} for keys %h>.

=item *

Boyer-Moore compiled scalars are now PVMGs, and the Boyer-Moore tables are now
stored via the mg_ptr of their C<PERL_MAGIC_bm>.
Previously they were PVGVs, with the tables stored in
the string buffer, beyond C<SvLEN()>.  This eliminates
the last place where the core stores data beyond C<SvLEN()>.

=item *

Simplified logic in C<Perl_sv_magic()> introduces a small change of
behavior for error cases involving unknown magic types.  Previously, if
C<Perl_sv_magic()> was passed a magic type unknown to it, it would

=over

=item 1.

Croak "Modification of a read-only value attempted" if read only

=item 2.

Return without error if the SV happened to already have this magic

=item 3.

otherwise croak "Don't know how to handle magic of type \\%o"

=back

Now it will always croak "Don't know how to handle magic of type \\%o", even
on read-only values, or SVs which already have the unknown magic type.

=item *

The experimental C<fetch_cop_label> function has been renamed to
C<cop_fetch_label>.

=item *

The C<cop_store_label> function has been added to the API, but is
experimental.

=item *

F<embedvar.h> has been simplified, and one level of macro indirection for
PL_* variables has been removed for the default (non-multiplicity)
configuration.  PERLVAR*() macros now directly expand their arguments to
tokens such as C<PL_defgv>, instead of expanding to C<PL_Idefgv>, with
F<embedvar.h> defining a macro to map C<PL_Idefgv> to C<PL_defgv>.  XS code
which has unwarranted chumminess with the implementation may need updating.

=item *

An API has been added to explicitly choose whether to export XSUB
symbols.  More detail can be found in the comments for commit e64345f8.

=item *

The C<is_gv_magical_sv> function has been eliminated and merged with
C<gv_fetchpvn_flags>.  It used to be called to determine whether a GV
should be autovivified in rvalue context.  Now it has been replaced with a
new C<GV_ADDMG> flag (not part of the API).

=item *

The returned code point from the function C<utf8n_to_uvuni()>
when the input is malformed UTF-8, malformations are allowed, and
C<utf8> warnings are off is now the Unicode REPLACEMENT CHARACTER
whenever the malformation is such that no well-defined code point can be
computed.  Previously the returned value was essentially garbage.  The
only malformations that have well-defined values are a zero-length
string (0 is the return), and overlong UTF-8 sequences.

=item *

Padlists are now marked C<AvREAL>; i.e., reference-counted.  They have
always been reference-counted, but were not marked real, because F<pad.c>
did its own clean-up, instead of using the usual clean-up code in F<sv.c>.
That caused problems in thread cloning, so now the C<AvREAL> flag is on,
but is turned off in F<pad.c> right before the padlist is freed (after
F<pad.c> has done its custom freeing of the pads).

=item *

All C files that make up the Perl core have been converted to UTF-8.

=item *

These new functions have been added as part of the work on Unicode symbols:

HvNAMELEN
    HvNAMEUTF8
    HvENAMELEN
    HvENAMEUTF8
    gv_init_pv
    gv_init_pvn
    gv_init_pvsv
    gv_fetchmeth_pv
    gv_fetchmeth_pvn
    gv_fetchmeth_sv
    gv_fetchmeth_pv_autoload
    gv_fetchmeth_pvn_autoload
    gv_fetchmeth_sv_autoload
    gv_fetchmethod_pv_flags
    gv_fetchmethod_pvn_flags
    gv_fetchmethod_sv_flags
    gv_autoload_pv
    gv_autoload_pvn
    gv_autoload_sv
    newGVgen_flags
    sv_derived_from_pv
    sv_derived_from_pvn
    sv_derived_from_sv
    sv_does_pv
    sv_does_pvn
    sv_does_sv
    whichsig_pv
    whichsig_pvn
    whichsig_sv
    newCONSTSUB_flags

The gv_fetchmethod_*_flags functions, like gv_fetchmethod_flags, are
experimental and may change in a future release.

=item *

The following functions were added.  These are I<not> part of the API:

GvNAMEUTF8
    GvENAMELEN
    GvENAME_HEK
    CopSTASH_flags
    CopSTASH_flags_set
    PmopSTASH_flags
    PmopSTASH_flags_set
    sv_sethek
    HEKfARG

There is also a C<HEKf> macro corresponding to C<SVf>, for
interpolating HEKs in formatted strings.

=item *

C<sv_catpvn_flags> takes a couple of new internal-only flags,
C<SV_CATBYTES> and C<SV_CATUTF8>, which tell it whether the char array to
be concatenated is UTF8.  This allows for more efficient concatenation than
creating temporary SVs to pass to C<sv_catsv>.

=item *

For XS AUTOLOAD subs, $AUTOLOAD is set once more, as it was in 5.6.0.  This
is in addition to setting C<SvPVX(cv)>, for compatibility with 5.8 to 5.14.
See L<perlguts/Autoloading with XSUBs>.

=item *

Perl now checks whether the array (the linearized isa) returned by a MRO
plugin begins with the name of the class itself, for which the array was
created, instead of assuming that it does.  This prevents the first element
from being skipped during method lookup.  It also means that
C<mro::get_linear_isa> may return an array with one more element than the
MRO plugin provided [perl #94306].

=item *

C<PL_curstash> is now reference-counted.

=item *

There are now feature bundle hints in C<PL_hints> (C<$^H>) that version
declarations use, to avoid having to load F<feature.pm>.  One setting of
the hint bits indicates a "custom" feature bundle, which means that the
entries in C<%^H> still apply.  F<feature.pm> uses that.

The C<HINT_FEATURE_MASK> macro is defined in F<perl.h> along with other
hints.  Other macros for setting and testing features and bundles are in
the new F<feature.h>.  C<FEATURE_IS_ENABLED> (which has moved to
F<feature.h>) is no longer used throughout the codebase, but more specific
macros, e.g., C<FEATURE_SAY_IS_ENABLED>, that are defined in F<feature.h>.

=item *

F<lib/feature.pm> is now a generated file, created by the new
F<regen/feature.pl> script, which also generates F<feature.h>.

=item *

Tied arrays are now always C<AvREAL>.  If C<@_> or C<DB::args> is tied, it
is reified first, to make sure this is always the case.

=item *

Two new functions C<utf8_to_uvchr_buf()> and C<utf8_to_uvuni_buf()> have
been added.  These are the same as C<utf8_to_uvchr> and
C<utf8_to_uvuni> (which are now deprecated), but take an extra parameter
that is used to guard against reading beyond the end of the input
string.
See L<perlapi/utf8_to_uvchr_buf> and L<perlapi/utf8_to_uvuni_buf>.

=item *

The regular expression engine now does TRIE case insensitive matches
under Unicode. This may change the output of C<< use re 'debug'; >>,
and will speed up various things.

=item *

There is a new C<wrap_op_checker()> function, which provides a thread-safe
alternative to writing to C<PL_check> directly.

=back

=head1 Selected Bug Fixes

=head2 Array and hash

=over

=item *

A bug has been fixed that would cause a "Use of freed value in iteration"
error if the next two hash elements that would be iterated over are
deleted [perl #85026]. (5.14.1)

=item *

Deleting the current hash iterator (the hash element that would be returned
by the next call to C<each>) in void context used not to free it
[perl #85026].

=item *

Deletion of methods via C<delete $Class::{method}> syntax used to update
method caches if called in void context, but not scalar or list context.

=item *

When hash elements are deleted in void context, the internal hash entry is
now freed before the value is freed, to prevent destructors called by that
latter freeing from seeing the hash in an inconsistent state.  It was
possible to cause double-frees if the destructor freed the hash itself
[perl #100340].

=item *

A C<keys> optimization in Perl 5.12.0 to make it faster on empty hashes
caused C<each> not to reset the iterator if called after the last element
was deleted.

=item *

Freeing deeply nested hashes no longer crashes [perl #44225].

=item *

It is possible from XS code to create hashes with elements that have no
values.  The hash element and slice operators used to crash
when handling these in lvalue context.  They now
produce a "Modification of non-creatable hash value attempted" error
message.

=item *

If list assignment to a hash or array triggered destructors that freed the
hash or array itself, a crash would ensue.  This is no longer the case
[perl #107440].

=item *

It used to be possible to free the typeglob of a localized array or hash
(e.g., C<local @{"x"}; delete $::{x}>), resulting in a crash on scope exit.

=item *

Some core bugs affecting L<Hash::Util> have been fixed: locking a hash
element that is a glob copy no longer causes the next assignment to it to
corrupt the glob (5.14.2), and unlocking a hash element that holds a
copy-on-write scalar no longer causes modifications to that scalar to
modify other scalars that were sharing the same string buffer.

=back

=head2 C API fixes

=over

=item *

The C<newHVhv> XS function now works on tied hashes, instead of crashing or
returning an empty hash.

=item *

The C<SvIsCOW> C macro now returns false for read-only copies of typeglobs,
such as those created by:

$hash{elem} = *foo;
  Hash::Util::lock_value %hash, 'elem';

It used to return true.

=item *

The C<SvPVutf8> C function no longer tries to modify its argument,
resulting in errors [perl #108994].

=item *

C<SvPVutf8> now works properly with magical variables.

=item *

C<SvPVbyte> now works properly non-PVs.

=item *

When presented with malformed UTF-8 input, the XS-callable functions
C<is_utf8_string()>, C<is_utf8_string_loc()>, and
C<is_utf8_string_loclen()> could read beyond the end of the input
string by up to 12 bytes.  This no longer happens.  [perl #32080].
However, currently, C<is_utf8_char()> still has this defect, see
L</is_utf8_char()> above.

=item *

The C-level C<pregcomp> function could become confused about whether the
pattern was in UTF8 if the pattern was an overloaded, tied, or otherwise
magical scalar [perl #101940].

=back

=head2 Compile-time hints

=over

=item *

Tying C<%^H> no longer causes perl to crash or ignore the contents of
C<%^H> when entering a compilation scope [perl #106282].

=item *

C<eval $string> and C<require> used not to
localize C<%^H> during compilation if it
was empty at the time the C<eval> call itself was compiled.  This could
lead to scary side effects, like C<use re "/m"> enabling other flags that
the surrounding code was trying to enable for its caller [perl #68750].

=item *

C<eval $string> and C<require> no longer localize hints (C<$^H> and C<%^H>)
at run time, but only during compilation of the $string or required file.
This makes C<BEGIN { $^H{foo}=7 }> equivalent to
C<BEGIN { eval '$^H{foo}=7' }> [perl #70151].

=item *

Creating a BEGIN block from XS code (via C<newXS> or C<newATTRSUB>) would,
on completion, make the hints of the current compiling code the current
hints.  This could cause warnings to occur in a non-warning scope.

=back

=head2 Copy-on-write scalars

Copy-on-write or shared hash key scalars
were introduced in 5.8.0, but most Perl code
did not encounter them (they were used mostly internally).  Perl
5.10.0 extended them, such that assigning C<__PACKAGE__> or a
hash key to a scalar would make it copy-on-write.  Several parts
of Perl were not updated to account for them, but have now been fixed.

=over

=item *

C<utf8::decode> had a nasty bug that would modify copy-on-write scalars'
string buffers in place (i.e., skipping the copy).  This could result in
hashes having two elements with the same key [perl #91834]. (5.14.2)

=item *

Lvalue subroutines were not allowing COW scalars to be returned.  This was
fixed for lvalue scalar context in Perl 5.12.3 and 5.14.0, but list context
was not fixed until this release.

=item *

Elements of restricted hashes (see the L<fields> pragma) containing
copy-on-write values couldn't be deleted, nor could such hashes be cleared
(C<%hash = ()>). (5.14.2)

=item *

Localizing a tied variable used to make it read-only if it contained a
copy-on-write string. (5.14.2)

=item *

Assigning a copy-on-write string to a stash
element no longer causes a double free.  Regardless of this change, the
results of such assignments are still undefined.

=item *

Assigning a copy-on-write string to a tied variable no longer stops that
variable from being tied if it happens to be a PVMG or PVLV internally.

=item *

Doing a substitution on a tied variable returning a copy-on-write
scalar used to cause an assertion failure or an "Attempt to free
nonexistent shared string" warning.

=item *

This one is a regression from 5.12: In 5.14.0, the bitwise assignment
operators C<|=>, C<^=> and C<&=> started leaving the left-hand side
undefined if it happened to be a copy-on-write string [perl #108480].

=item *

L<Storable>, L<Devel::Peek> and L<PerlIO::scalar> had similar problems.
See L</Updated Modules and Pragmata>, above.

=back

=head2 The debugger

=over

=item *

F<dumpvar.pl>, and therefore the C<x> command in the debugger, have been
fixed to handle objects blessed into classes whose names contain "=".  The
contents of such objects used not to be dumped [perl #101814].

=item *

The "R" command for restarting a debugger session has been fixed to work on
Windows, or any other system lacking a C<POSIX::_SC_OPEN_MAX> constant
[perl #87740].

=item *

The C<#line 42 foo> directive used not to update the arrays of lines used
by the debugger if it occurred in a string eval.  This was partially fixed
in 5.14, but it worked only for a single C<#line 42 foo> in each eval.  Now
it works for multiple.

=item *

When subroutine calls are intercepted by the debugger, the name of the
subroutine or a reference to it is stored in C<$DB::sub>, for the debugger
to access.  Sometimes (such as C<$foo = *bar; undef *bar; &$foo>)
C<$DB::sub> would be set to a name that could not be used to find the
subroutine, and so the debugger's attempt to call it would fail.  Now the
check to see whether a reference is needed is more robust, so those
problems should not happen anymore [rt.cpan.org #69862].

=item *

Every subroutine has a filename associated with it that the debugger uses.
The one associated with constant subroutines used to be misallocated when
cloned under threads.  Consequently, debugging threaded applications could
result in memory corruption [perl #96126].

=back

=head2 Dereferencing operators

=over

=item *

C<defined(${"..."})>, C<defined(*{"..."})>, etc., used to
return true for most, but not all built-in variables, if
they had not been used yet.  This bug affected C<${^GLOBAL_PHASE}> and
C<${^UTF8CACHE}>, among others.  It also used to return false if the
package name was given as well (C<${"::!"}>) [perl #97978, #97492].

=item *

Perl 5.10.0 introduced a similar bug: C<defined(*{"foo"})> where "foo"
represents the name of a built-in global variable used to return false if
the variable had never been used before, but only on the I<first> call.
This, too, has been fixed.

=item *

Since 5.6.0, C<*{ ... }> has been inconsistent in how it treats undefined
values.  It would die in strict mode or lvalue context for most undefined
values, but would be treated as the empty string (with a warning) for the
specific scalar return by C<undef()> (C<&PL_sv_undef> internally).  This
has been corrected.  C<undef()> is now treated like other undefined
scalars, as in Perl 5.005.

=back

=head2 Filehandle, last-accessed

Perl has an internal variable that stores the last filehandle to be
accessed.  It is used by C<$.> and by C<tell> and C<eof> without
arguments.

=over

=item *

It used to be possible to set this internal variable to a glob copy and
then modify that glob copy to be something other than a glob, and still
have the last-accessed filehandle associated with the variable after
assigning a glob to it again:

my $foo = *STDOUT;  # $foo is a glob copy
    <$foo>;             # $foo is now the last-accessed handle
    $foo = 3;           # no longer a glob
    $foo = *STDERR;     # still the last-accessed handle

Now the C<$foo = 3> assignment unsets that internal variable, so there
is no last-accessed filehandle, just as if C<< <$foo> >> had never
happened.

This also prevents some unrelated handle from becoming the last-accessed
handle if $foo falls out of scope and the same internal SV gets used for
another handle [perl #97988].

=item *

A regression in 5.14 caused these statements not to set that internal
variable:

my $fh = *STDOUT;
    tell $fh;
    eof  $fh;
    seek $fh, 0,0;
    tell     *$fh;
    eof      *$fh;
    seek     *$fh, 0,0;
    readline *$fh;

This is now fixed, but C<tell *{ *$fh }> still has the problem, and it
is not clear how to fix it [perl #106536].

=back

=head2 Filetests and C<stat>

The term "filetests" refers to the operators that consist of a hyphen
followed by a single letter: C<-r>, C<-x>, C<-M>, etc.  The term "stacked"
when applied to filetests means followed by another filetest operator
sharing the same operand, as in C<-r -x -w $fooo>.

=over

=item *

C<stat> produces more consistent warnings.  It no longer warns for "_"
[perl #71002] and no longer skips the warning at times for other unopened
handles.  It no longer warns about an unopened handle when the operating
system's C<fstat> function fails.

=item *

C<stat> would sometimes return negative numbers for large inode numbers,
because it was using the wrong internal C type. [perl #84590]

=item *

C<lstat> is documented to fall back to C<stat> (with a warning) when given
a filehandle.  When passed an IO reference, it was actually doing the
equivalent of S<C<stat _>> and ignoring the handle.

=item *

C<-T _> with no preceding C<stat> used to produce a
confusing "uninitialized" warning, even though there
is no visible uninitialized value to speak of.

=item *

C<-T>, C<-B>, C<-l> and C<-t> now work
when stacked with other filetest operators
[perl #77388].

=item *

In 5.14.0, filetest ops (C<-r>, C<-x>, etc.) started calling FETCH on a
tied argument belonging to the previous argument to a list operator, if
called with a bareword argument or no argument at all.  This has been
fixed, so C<push @foo, $tied, -r> no longer calls FETCH on C<$tied>.

=item *

In Perl 5.6, C<-l> followed by anything other than a bareword would treat
its argument as a file name.  That was changed in 5.8 for glob references
(C<\*foo>), but not for globs themselves (C<*foo>).  C<-l> started
returning C<undef> for glob references without setting the last
stat buffer that the "_" handle uses, but only if warnings
were turned on.  With warnings off, it was the same as 5.6.
In other words, it was simply buggy and inconsistent.  Now the 5.6
behavior has been restored.

=item *

C<-l> followed by a bareword no longer "eats" the previous argument to
the list operator in whose argument list it resides.  Hence,
C<print "bar", -l foo> now actually prints "bar", because C<-l>
on longer eats it.

=item *

Perl keeps several internal variables to keep track of the last stat
buffer, from which file(handle) it originated, what type it was, and
whether the last stat succeeded.

There were various cases where these could get out of synch, resulting in
inconsistent or erratic behavior in edge cases (every mention of C<-T>
applies to C<-B> as well):

=over

=item *

C<-T I<HANDLE>>, even though it does a C<stat>, was not resetting the last
stat type, so an C<lstat _> following it would merrily return the wrong
results.  Also, it was not setting the success status.

=item *

Freeing the handle last used by C<stat> or a filetest could result in
S<C<-T _>> using an unrelated handle.

=item *

C<stat> with an IO reference would not reset the stat type or record the
filehandle for S<C<-T _>> to use.

=item *

Fatal warnings could cause the stat buffer not to be reset
for a filetest operator on an unopened filehandle or C<-l> on any handle.
Fatal warnings also stopped C<-T> from setting C<$!>.

=item *

When the last stat was on an unreadable file, C<-T _> is supposed to
return C<undef>, leaving the last stat buffer unchanged.  But it was
setting the stat type, causing C<lstat _> to stop working.

=item *

C<-T I<FILENAME>> was not resetting the internal stat buffers for
unreadable files.

=back

These have all been fixed.

=back

=head2 Formats

=over

=item *

Several edge cases have been fixed with formats and C<formline>;
in particular, where the format itself is potentially variable (such as
with ties and overloading), and where the format and data differ in their
encoding.  In both these cases, it used to possible for the output to be
corrupted [perl #91032].

=item *

C<formline> no longer converts its argument into a string in-place.  So
passing a reference to C<formline> no longer destroys the reference
[perl #79532].

=item *

Assignment to C<$^A> (the format output accumulator) now recalculates
the number of lines output.

=back

=head2 C<given> and C<when>

=over

=item *

C<given> was not scoping its implicit $_ properly, resulting in memory
leaks or "Variable is not available" warnings [perl #94682].

=item *

C<given> was not calling set-magic on the implicit lexical C<$_> that it
uses.  This meant, for example, that C<pos> would be remembered from one
execution of the same C<given> block to the next, even if the input were a
different variable [perl #84526].

=item *

C<when> blocks are now capable of returning variables declared inside the
enclosing C<given> block [perl #93548].

=back

=head2 The C<glob> operator

=over

=item *

On OSes other than VMS, Perl's C<glob> operator (and the C<< <...> >> form)
use L<File::Glob> underneath.  L<File::Glob> splits the pattern into words,
before feeding each word to its C<bsd_glob> function.

There were several inconsistencies in the way the split was done.  Now
quotation marks (' and ") are always treated as shell-style word delimiters
(that allow whitespace as part of a word) and backslashes are always
preserved, unless they exist to escape quotation marks.  Before, those
would only sometimes be the case, depending on whether the pattern
contained whitespace.  Also, escaped whitespace at the end of the pattern
is no longer stripped [perl #40470].

=item *

C<CORE::glob> now works as a way to call the default globbing function.  It
used to respect overrides, despite the C<CORE::> prefix.

=item *

Under miniperl (used to configure modules when perl itself is built),
C<glob> now clears %ENV before calling csh, since the latter croaks on some
systems if it does not like the contents of the LS_COLORS environment
variable [perl #98662].

=back

=head2 Lvalue subroutines

=over

=item *

Explicit return now returns the actual argument passed to return, instead
of copying it [perl #72724, #72706].

=item *

Lvalue subroutines used to enforce lvalue syntax (i.e., whatever can go on
the left-hand side of C<=>) for the last statement and the arguments to
return.  Since lvalue subroutines are not always called in lvalue context,
this restriction has been lifted.

=item *

Lvalue subroutines are less restrictive about what values can be returned.
It used to croak on values returned by C<shift> and C<delete> and from
other subroutines, but no longer does so [perl #71172].

=item *

Empty lvalue subroutines (C<sub :lvalue {}>) used to return C<@_> in list
context.  All subroutines used to do this, but regular subs were fixed in
Perl 5.8.2.  Now lvalue subroutines have been likewise fixed.

=item *

Autovivification now works on values returned from lvalue subroutines
[perl #7946], as does returning C<keys> in lvalue context.

=item *

Lvalue subroutines used to copy their return values in rvalue context.  Not
only was this a waste of CPU cycles, but it also caused bugs.  A C<($)>
prototype would cause an lvalue sub to copy its return value [perl #51408],
and C<while(lvalue_sub() =~ m/.../g) { ... }> would loop endlessly
[perl #78680].

=item *

When called in potential lvalue context
(e.g., subroutine arguments or a list
passed to C<for>), lvalue subroutines used to copy
any read-only value that was returned.  E.g., C< sub :lvalue { $] } >
would not return C<$]>, but a copy of it.

=item *

When called in potential lvalue context, an lvalue subroutine returning
arrays or hashes used to bind the arrays or hashes to scalar variables,
resulting in bugs.  This was fixed in 5.14.0 if an array were the first
thing returned from the subroutine (but not for C<$scalar, @array> or
hashes being returned).  Now a more general fix has been applied
[perl #23790].

=item *

Method calls whose arguments were all surrounded with C<my()> or C<our()>
(as in C<< $object->method(my($a,$b)) >>) used to force lvalue context on
the subroutine.  This would prevent lvalue methods from returning certain
values.

=item *

Lvalue sub calls that are not determined to be such at compile time
(C<&$name> or &{"name"}) are no longer exempt from strict refs if they
occur in the last statement of an lvalue subroutine [perl #102486].

=item *

Sub calls whose subs are not visible at compile time, if
they occurred in the last statement of an lvalue subroutine,
would reject non-lvalue subroutines and die with "Can't modify non-lvalue
subroutine call" [perl #102486].

Non-lvalue sub calls whose subs I<are> visible at compile time exhibited
the opposite bug.  If the call occurred in the last statement of an lvalue
subroutine, there would be no error when the lvalue sub was called in
lvalue context.  Perl would blindly assign to the temporary value returned
by the non-lvalue subroutine.

=item *

C<AUTOLOAD> routines used to take precedence over the actual sub being
called (i.e., when autoloading wasn't needed), for sub calls in lvalue or
potential lvalue context, if the subroutine was not visible at compile
time.

=item *

Applying the C<:lvalue> attribute to an XSUB or to an aliased subroutine
stub with C<< sub foo :lvalue; >> syntax stopped working in Perl 5.12.
This has been fixed.

=item *

Applying the :lvalue attribute to subroutine that is already defined does
not work properly, as the attribute changes the way the sub is compiled.
Hence, Perl 5.12 began warning when an attempt is made to apply the
attribute to an already defined sub.  In such cases, the attribute is
discarded.

But the change in 5.12 missed the case where custom attributes are also
present: that case still silently and ineffectively applied the attribute.
That omission has now been corrected.  C<sub foo :lvalue :Whatever> (when
C<foo> is already defined) now warns about the :lvalue attribute, and does
not apply it.

=item *

A bug affecting lvalue context propagation through nested lvalue subroutine
calls has been fixed.  Previously, returning a value in nested rvalue
context would be treated as lvalue context by the inner subroutine call,
resulting in some values (such as read-only values) being rejected.

=back

=head2 Overloading

=over

=item *

Arithmetic assignment (C<$left += $right>) involving overloaded objects
that rely on the 'nomethod' override no longer segfault when the left
operand is not overloaded.

=item *

Errors that occur when methods cannot be found during overloading now
mention the correct package name, as they did in 5.8.x, instead of
erroneously mentioning the "overload" package, as they have since 5.10.0.

=item *

Undefining C<%overload::> no longer causes a crash.

=back

=head2 Prototypes of built-in keywords

=over

=item *

The C<prototype> function no longer dies for the C<__FILE__>, C<__LINE__>
and C<__PACKAGE__> directives.  It now returns an empty-string prototype
for them, because they are syntactically indistinguishable from nullary
functions like C<time>.

=item *

C<prototype> now returns C<undef> for all overridable infix operators,
such as C<eq>, which are not callable in any way resembling functions.
It used to return incorrect prototypes for some and die for others
[perl #94984].

=item *

The prototypes of several built-in functions--C<getprotobynumber>, C<lock>,
C<not> and C<select>--have been corrected, or at least are now closer to
reality than before.

=back

=head2 Regular expressions

=for comment Is it possible to merge some of these items?

=over 4

=item *

C</[[:ascii:]]/> and C</[[:blank:]]/> now use locale rules under
C<use locale> when the platform supports that.  Previously, they used
the platform's native character set.

=item *

C<m/[[:ascii:]]/i> and C</\p{ASCII}/i> now match identically (when not
under a differing locale).  This fixes a regression introduced in 5.14
in which the first expression could match characters outside of ASCII,
such as the KELVIN SIGN.

=item *

C</.*/g> would sometimes refuse to match at the end of a string that ends
with "\n".  This has been fixed [perl #109206].

=item *

Starting with 5.12.0, Perl used to get its internal bookkeeping muddled up
after assigning C<${ qr// }> to a hash element and locking it with
L<Hash::Util>.  This could result in double frees, crashes, or erratic
behavior.

=item *

The new (in 5.14.0) regular expression modifier C</a> when repeated like
C</aa> forbids the characters outside the ASCII range that match
characters inside that range from matching under C</i>.  This did not
work under some circumstances, all involving alternation, such as:

"\N{KELVIN SIGN}" =~ /k|foo/iaa;

succeeded inappropriately.  This is now fixed.

=item *

5.14.0 introduced some memory leaks in regular expression character
classes such as C<[\w\s]>, which have now been fixed. (5.14.1)

=item *

An edge case in regular expression matching could potentially loop.
This happened only under C</i> in bracketed character classes that have
characters with multi-character folds, and the target string to match
against includes the first portion of the fold, followed by another
character that has a multi-character fold that begins with the remaining
portion of the fold, plus some more.

"s\N{U+DF}" =~ /[\x{DF}foo]/i

is one such case.  C<\xDF> folds to C<"ss">. (5.14.1)

=item *

A few characters in regular expression pattern matches did not
match correctly in some circumstances, all involving C</i>.  The
affected characters are:
COMBINING GREEK YPOGEGRAMMENI,
GREEK CAPITAL LETTER IOTA,
GREEK CAPITAL LETTER UPSILON,
GREEK PROSGEGRAMMENI,
GREEK SMALL LETTER IOTA WITH DIALYTIKA AND OXIA,
GREEK SMALL LETTER IOTA WITH DIALYTIKA AND TONOS,
GREEK SMALL LETTER UPSILON WITH DIALYTIKA AND OXIA,
GREEK SMALL LETTER UPSILON WITH DIALYTIKA AND TONOS,
LATIN SMALL LETTER LONG S,
LATIN SMALL LIGATURE LONG S T,
and
LATIN SMALL LIGATURE ST.

=item *

A memory leak regression in regular expression compilation
under threading has been fixed.

=item *

A regression introduced in 5.14.0 has
been fixed.  This involved an inverted
bracketed character class in a regular expression that consisted solely
of a Unicode property.  That property wasn't getting inverted outside the
Latin1 range.

=item *

Three problematic Unicode characters now work better in regex pattern matching under C</i>.

In the past, three Unicode characters:
LATIN SMALL LETTER SHARP S,
GREEK SMALL LETTER IOTA WITH DIALYTIKA AND TONOS,
and
GREEK SMALL LETTER UPSILON WITH DIALYTIKA AND TONOS,
along with the sequences that they fold to
(including "ss" for LATIN SMALL LETTER SHARP S),
did not properly match under C</i>.  5.14.0 fixed some of these cases,
but introduced others, including a panic when one of the characters or
sequences was used in the C<(?(DEFINE)> regular expression predicate.
The known bugs that were introduced in 5.14 have now been fixed; as well
as some other edge cases that have never worked until now.  These all
involve using the characters and sequences outside bracketed character
classes under C</i>.  This closes [perl #98546].

There remain known problems when using certain characters with
multi-character folds inside bracketed character classes, including such
constructs as C<qr/[\N{LATIN SMALL LETTER SHARP}a-z]/i>.  These
remaining bugs are addressed in [perl #89774].

=item *

RT #78266: The regex engine has been leaking memory when accessing
named captures that weren't matched as part of a regex ever since 5.10
when they were introduced; e.g., this would consume over a hundred MB of
memory:

for (1..10_000_000) {
        if ("foo" =~ /(foo|(?<capture>bar))?/) {
            my $capture = $+{capture}
        }
    }
    system "ps -o rss $$"'

=item *

In 5.14, C</[[:lower:]]/i> and C</[[:upper:]]/i> no longer matched the
opposite case.  This has been fixed [perl #101970].

=item *

A regular expression match with an overloaded object on the right-hand side
would sometimes stringify the object too many times.

=item *

A regression has been fixed that was introduced in 5.14, in C</i>
regular expression matching, in which a match improperly fails if the
pattern is in UTF-8, the target string is not, and a Latin-1 character
precedes a character in the string that should match the pattern.
[perl #101710]

=item *

In case-insensitive regular expression pattern matching, no longer on
UTF-8 encoded strings does the scan for the start of match look only at
the first possible position.  This caused matches such as
C<"f\x{FB00}" =~ /ff/i> to fail.

=item *

The regexp optimizer no longer crashes on debugging builds when merging
fixed-string nodes with inconvenient contents.

=item *

A panic involving the combination of the regular expression modifiers
C</aa> and the C<\b> escape sequence introduced in 5.14.0 has been
fixed [perl #95964]. (5.14.2)

=item *

The combination of the regular expression modifiers C</aa> and the C<\b>
and C<\B> escape sequences did not work properly on UTF-8 encoded
strings.  All non-ASCII characters under C</aa> should be treated as
non-word characters, but what was happening was that Unicode rules were
used to determine wordness/non-wordness for non-ASCII characters.  This
is now fixed [perl #95968].

=item *

C<< (?foo: ...) >> no longer loses passed in character set.

=item *

The trie optimization used to have problems with alternations containing
an empty C<(?:)>, causing C<< "x" =~ /\A(?>(?:(?:)A|B|C?x))\z/ >> not to
match, whereas it should [perl #111842].

=item *

Use of lexical (C<my>) variables in code blocks embedded in regular
expressions will no longer result in memory corruption or crashes.

Nevertheless, these code blocks are still experimental, as there are still
problems with the wrong variables being closed over (in loops for instance)
and with abnormal exiting (e.g., C<die>) causing memory corruption.

=item *

The C<\h>, C<\H>, C<\v> and C<\V> regular expression metacharacters used to
cause a panic error message when trying to match at the end of the
string [perl #96354].

=item *

The abbreviations for four C1 control characters C<MW> C<PM>, C<RI>, and
C<ST> were previously unrecognized by C<\N{}>, vianame(), and
string_vianame().

=item *

Mentioning a variable named "&" other than C<$&> (i.e., C<@&> or C<%&>) no
longer stops C<$&> from working.  The same applies to variables named "'"
and "`" [perl #24237].

=item *

Creating a C<UNIVERSAL::AUTOLOAD> sub no longer stops C<%+>, C<%-> and
C<%!> from working some of the time [perl #105024].

=back

=head2 Smartmatching

=over

=item *

C<~~> now correctly handles the precedence of Any~~Object, and is not tricked
by an overloaded object on the left-hand side.

=item *

In Perl 5.14.0, C<$tainted ~~ @array> stopped working properly.  Sometimes
it would erroneously fail (when C<$tainted> contained a string that occurs
in the array I<after> the first element) or erroneously succeed (when
C<undef> occurred after the first element) [perl #93590].

=back

=head2 The C<sort> operator

=over

=item *

C<sort> was not treating C<sub {}> and C<sub {()}> as equivalent when
such a sub was provided as the comparison routine.  It used to croak on
C<sub {()}>.

=item *

C<sort> now works once more with custom sort routines that are XSUBs.  It
stopped working in 5.10.0.

=item *

C<sort> with a constant for a custom sort routine, although it produces
unsorted results, no longer crashes.  It started crashing in 5.10.0.

=item *

Warnings emitted by C<sort> when a custom comparison routine returns a
non-numeric value now contain "in sort" and show the line number of the
C<sort> operator, rather than the last line of the comparison routine.  The
warnings also now occur only if warnings are enabled in the scope where
C<sort> occurs.  Previously the warnings would occur if enabled in the
comparison routine's scope.

=item *

C<< sort { $a <=> $b } >>, which is optimized internally, now produces
"uninitialized" warnings for NaNs (not-a-number values), since C<< <=> >>
returns C<undef> for those.  This brings it in line with
S<C<< sort { 1; $a <=> $b } >>> and other more complex cases, which are not
optimized [perl #94390].

=back

=head2 The C<substr> operator

=over

=item *

Tied (and otherwise magical) variables are no longer exempt from the
"Attempt to use reference as lvalue in substr" warning.

=item *

That warning now occurs when the returned lvalue is assigned to, not
when C<substr> itself is called.  This makes a difference only if the
return value of C<substr> is referenced and later assigned to.

=item *

Passing a substring of a read-only value or a typeglob to a function
(potential lvalue context) no longer causes an immediate "Can't coerce"
or "Modification of a read-only value" error.  That error occurs only 
if the passed value is assigned to.

The same thing happens with the "substr outside of string" error.  If
the lvalue is only read from, not written to, it is now just a warning, as
with rvalue C<substr>.

=item *

C<substr> assignments no longer call FETCH twice if the first argument
is a tied variable, just once.

=back

=head2 Support for embedded nulls

Some parts of Perl did not work correctly with nulls (C<chr 0>) embedded in
strings.  That meant that, for instance, C<< $m = "a\0b"; foo->$m >> would
call the "a" method, instead of the actual method name contained in $m.
These parts of perl have been fixed to support nulls:

=over

=item *

Method names

=item *

Typeglob names (including filehandle and subroutine names)

=item *

Package names, including the return value of C<ref()>

=item *

Typeglob elements (C<*foo{"THING\0stuff"}>)

=item *

Signal names

=item *

Various warnings and error messages that mention variable names or values,
methods, etc.

=back

One side effect of these changes is that blessing into "\0" no longer
causes C<ref()> to return false.

=head2 Threading bugs

=over

=item *

Typeglobs returned from threads are no longer cloned if the parent thread
already has a glob with the same name.  This means that returned
subroutines will now assign to the right package variables [perl #107366].

=item *

Some cases of threads crashing due to memory allocation during cloning have
been fixed [perl #90006].

=item *

Thread joining would sometimes emit "Attempt to free unreferenced scalar"
warnings if C<caller> had been used from the C<DB> package before thread
creation [perl #98092].

=item *

Locking a subroutine (via C<lock &sub>) is no longer a compile-time error
for regular subs.  For lvalue subroutines, it no longer tries to return the
sub as a scalar, resulting in strange side effects like C<ref \$_>
returning "CODE" in some instances.

C<lock &sub> is now a run-time error if L<threads::shared> is loaded (a
no-op otherwise), but that may be rectified in a future version.

=back

=head2 Tied variables

=over

=item *

Various cases in which FETCH was being ignored or called too many times
have been fixed:

=over

=item *

C<PerlIO::get_layers> [perl #97956]

=item *

C<$tied =~ y/a/b/>, C<chop $tied> and C<chomp $tied> when $tied holds a
reference.

=item *

When calling C<local $_> [perl #105912]

=item *

Four-argument C<select>

=item *

A tied buffer passed to C<sysread>

=item *

C<< $tied .= <> >>

=item *

Three-argument C<open>, the third being a tied file handle
(as in C<< open $fh, ">&", $tied >>)

=item *

C<sort> with a reference to a tied glob for the comparison routine.

=item *

C<..> and C<...> in list context [perl #53554].

=item *

C<${$tied}>, C<@{$tied}>, C<%{$tied}> and C<*{$tied}> where the tied
variable returns a string (C<&{}> was unaffected)

=item *

C<defined ${ $tied_variable }>

=item *

Various functions that take a filehandle argument in rvalue context
(C<close>, C<readline>, etc.) [perl #97482]

=item *

Some cases of dereferencing a complex expression, such as
C<${ (), $tied } = 1>, used to call C<FETCH> multiple times, but now call
it once.

=item *

C<$tied-E<gt>method> where $tied returns a package name--even resulting in
a failure to call the method, due to memory corruption

=item *

Assignments like C<*$tied = \&{"..."}> and C<*glob = $tied>

=item *

C<chdir>, C<chmod>, C<chown>, C<utime>, C<truncate>, C<stat>, C<lstat> and
the filetest ops (C<-r>, C<-x>, etc.)

=back

=item *

C<caller> sets C<@DB::args> to the subroutine arguments when called from
the DB package.  It used to crash when doing so if C<@DB::args> happened to
be tied.  Now it croaks instead.

=item *

Tying an element of %ENV or C<%^H> and then deleting that element would
result in a call to the tie object's DELETE method, even though tying the
element itself is supposed to be equivalent to tying a scalar (the element
is, of course, a scalar) [perl #67490].

=item *

When Perl autovivifies an element of a tied array or hash (which entails
calling STORE with a new reference), it now calls FETCH immediately after
the STORE, instead of assuming that FETCH would have returned the same
reference.  This can make it easier to implement tied objects [perl #35865, #43011].

=item *

Four-argument C<select> no longer produces its "Non-string passed as
bitmask" warning on tied or tainted variables that are strings.

=item *

Localizing a tied scalar that returns a typeglob no longer stops it from
being tied till the end of the scope.

=item *

Attempting to C<goto> out of a tied handle method used to cause memory
corruption or crashes.  Now it produces an error message instead
[perl #8611].

=item *

A bug has been fixed that occurs when a tied variable is used as a
subroutine reference:  if the last thing assigned to or returned from the
variable was a reference or typeglob, the C<\&$tied> could either crash or
return the wrong subroutine.  The reference case is a regression introduced
in Perl 5.10.0.  For typeglobs, it has probably never worked till now.

=back

=head2 Version objects and vstrings

=over

=item *

The bitwise complement operator (and possibly other operators, too) when
passed a vstring would leave vstring magic attached to the return value,
even though the string had changed.  This meant that
C<< version->new(~v1.2.3) >> would create a version looking like "v1.2.3"
even though the string passed to C<< version->new >> was actually
"\376\375\374".  This also caused L<B::Deparse> to deparse C<~v1.2.3>
incorrectly, without the C<~> [perl #29070].

=item *

Assigning a vstring to a magic (e.g., tied, C<$!>) variable and then
assigning something else used to blow away all magic.  This meant that
tied variables would come undone, C<$!> would stop getting updated on
failed system calls, C<$|> would stop setting autoflush, and other
mischief would take place.  This has been fixed.

=item *

C<< version->new("version") >> and C<printf "%vd", "version"> no longer
crash [perl #102586].

=item *

Version comparisons, such as those that happen implicitly with C<use
v5.43>, no longer cause locale settings to change [perl #105784].

=item *

Version objects no longer cause memory leaks in boolean context
[perl #109762].

=back

=head2 Warnings, redefinition

=over

=item *

Subroutines from the C<autouse> namespace are once more exempt from
redefinition warnings.  This used to work in 5.005, but was broken in
5.6 for most subroutines.  For subs created via XS that redefine
subroutines from the C<autouse> package, this stopped working in 5.10.

=item *

New XSUBs now produce redefinition warnings if they overwrite existing
subs, as they did in 5.8.x.  (The C<autouse> logic was reversed in
5.10-14.  Only subroutines from the C<autouse> namespace would warn
when clobbered.)

=item *

C<newCONSTSUB> used to use compile-time warning hints, instead of
run-time hints.  The following code should never produce a redefinition
warning, but it used to, if C<newCONSTSUB> redefined an existing
subroutine:

use warnings;
    BEGIN {
        no warnings;
        some_XS_function_that_calls_new_CONSTSUB();
    }

=item *

Redefinition warnings for constant subroutines are on by default (what
are known as severe warnings in L<perldiag>).  This occurred only
when it was a glob assignment or declaration of a Perl subroutine that
caused the warning.  If the creation of XSUBs triggered the warning, it
was not a default warning.  This has been corrected.

=item *

The internal check to see whether a redefinition warning should occur
used to emit "uninitialized" warnings in cases like this:

use warnings "uninitialized";
    use constant {u => undef, v => undef};
    sub foo(){u}
    sub foo(){v}

=back

=head2 Warnings, "Uninitialized"

=over

=item *

Various functions that take a filehandle argument in rvalue context
(C<close>, C<readline>, etc.) used to warn twice for an undefined handle
[perl #97482].

=item *

C<dbmopen> now only warns once, rather than three times, if the mode
argument is C<undef> [perl #90064].

=item *

The C<+=> operator does not usually warn when the left-hand side is
C<undef>, but it was doing so for tied variables.  This has been fixed
[perl #44895].

=item *

A bug fix in Perl 5.14 introduced a new bug, causing "uninitialized"
warnings to report the wrong variable if the operator in question had
two operands and one was C<%{...}> or C<@{...}>.  This has been fixed
[perl #103766].

=item *

C<..> and C<...> in list context now mention the name of the variable in
"uninitialized" warnings for string (as opposed to numeric) ranges.

=back

=head2 Weak references

=over

=item *

Weakening the first argument to an automatically-invoked C<DESTROY> method
could result in erroneous "DESTROY created new reference" errors or
crashes.  Now it is an error to weaken a read-only reference.

=item *

Weak references to lexical hashes going out of scope were not going stale
(becoming undefined), but continued to point to the hash.

=item *

Weak references to lexical variables going out of scope are now broken
before any magical methods (e.g., DESTROY on a tie object) are called.
This prevents such methods from modifying the variable that will be seen
the next time the scope is entered.

=item *

Creating a weak reference to an @ISA array or accessing the array index
(C<$#ISA>) could result in confused internal bookkeeping for elements
later added to the @ISA array.  For instance, creating a weak
reference to the element itself could push that weak reference on to @ISA;
and elements added after use of C<$#ISA> would be ignored by method lookup
[perl #85670].

=back

=head2 Other notable fixes

=over

=item *

C<quotemeta> now quotes consistently the same non-ASCII characters under
C<use feature 'unicode_strings'>, regardless of whether the string is
encoded in UTF-8 or not, hence fixing the last vestiges (we hope) of the
notorious L<perlunicode/The "Unicode Bug">.  [perl #77654].

Which of these code points is quoted has changed, based on Unicode's
recommendations.  See L<perlfunc/quotemeta> for details.

=item *

C<study> is now a no-op, presumably fixing all outstanding bugs related to
study causing regex matches to behave incorrectly!

=item *

When one writes C<open foo || die>, which used to work in Perl 4, a
"Precedence problem" warning is produced.  This warning used erroneously to
apply to fully-qualified bareword handle names not followed by C<||>.  This
has been corrected.

=item *

After package aliasing (C<*foo:: = *bar::>), C<select> with 0 or 1 argument
would sometimes return a name that could not be used to refer to the
filehandle, or sometimes it would return C<undef> even when a filehandle
was selected.  Now it returns a typeglob reference in such cases.

=item *

C<PerlIO::get_layers> no longer ignores some arguments that it thinks are
numeric, while treating others as filehandle names.  It is now consistent
for flat scalars (i.e., not references).

=item *

Unrecognized switches on C<#!> line

If a switch, such as B<-x>, that cannot occur on the C<#!> line is used
there, perl dies with "Can't emulate...".

It used to produce the same message for switches that perl did not
recognize at all, whether on the command line or the C<#!> line.

Now it produces the "Unrecognized switch" error message [perl #104288].

=item *

C<system> now temporarily blocks the SIGCHLD signal handler, to prevent the
signal handler from stealing the exit status [perl #105700].

=item *

The %n formatting code for C<printf> and C<sprintf>, which causes the number
of characters to be assigned to the next argument, now actually
assigns the number of characters, instead of the number of bytes.

It also works now with special lvalue functions like C<substr> and with
nonexistent hash and array elements [perl #3471, #103492].

=item *

Perl skips copying values returned from a subroutine, for the sake of
speed, if doing so would make no observable difference.  Because of faulty
logic, this would happen with the
result of C<delete>, C<shift> or C<splice>, even if the result was
referenced elsewhere.  It also did so with tied variables about to be freed
[perl #91844, #95548].

=item *

C<utf8::decode> now refuses to modify read-only scalars [perl #91850].

=item *

Freeing $_ inside a C<grep> or C<map> block, a code block embedded in a
regular expression, or an @INC filter (a subroutine returned by a
subroutine in @INC) used to result in double frees or crashes
[perl #91880, #92254, #92256].

=item *

C<eval> returns C<undef> in scalar context or an empty list in list
context when there is a run-time error.  When C<eval> was passed a
string in list context and a syntax error occurred, it used to return a
list containing a single undefined element.  Now it returns an empty
list in list context for all errors [perl #80630].

=item *

C<goto &func> no longer crashes, but produces an error message, when
the unwinding of the current subroutine's scope fires a destructor that
undefines the subroutine being "goneto" [perl #99850].

=item *

Perl now holds an extra reference count on the package that code is
currently compiling in.  This means that the following code no longer
crashes [perl #101486]:

package Foo;
    BEGIN {*Foo:: = *Bar::}
    sub foo;

=item *

The C<x> repetition operator no longer crashes on 64-bit builds with large
repeat counts [perl #94560].

=item *

Calling C<require> on an implicit C<$_> when C<*CORE::GLOBAL::require> has
been overridden does not segfault anymore, and C<$_> is now passed to the
overriding subroutine [perl #78260].

=item *

C<use> and C<require> are no longer affected by the I/O layers active in
the caller's scope (enabled by L<open.pm|open>) [perl #96008].

=item *

C<our $::é; $é> (which is invalid) no longer produces the "Compilation
error at lib/utf8_heavy.pl..." error message, which it started emitting in
5.10.0 [perl #99984].

=item *

On 64-bit systems, C<read()> now understands large string offsets beyond
the 32-bit range.

=item *

Errors that occur when processing subroutine attributes no longer cause the
subroutine's op tree to leak.

=item *

Passing the same constant subroutine to both C<index> and C<formline> no
longer causes one or the other to fail [perl #89218]. (5.14.1)

=item *

List assignment to lexical variables declared with attributes in the same
statement (C<my ($x,@y) : blimp = (72,94)>) stopped working in Perl 5.8.0.
It has now been fixed.

=item *

Perl 5.10.0 introduced some faulty logic that made "U*" in the middle of
a pack template equivalent to "U0" if the input string was empty.  This has
been fixed [perl #90160]. (5.14.2)

=item *

Destructors on objects were not called during global destruction on objects
that were not referenced by any scalars.  This could happen if an array
element were blessed (e.g., C<bless \$a[0]>) or if a closure referenced a
blessed variable (C<bless \my @a; sub foo { @a }>).

Now there is an extra pass during global destruction to fire destructors on
any objects that might be left after the usual passes that check for
objects referenced by scalars [perl #36347].

=item *

Fixed a case where it was possible that a freed buffer may have been read
from when parsing a here document [perl #90128]. (5.14.1)

=item *

C<each(I<ARRAY>)> is now wrapped in C<defined(...)>, like C<each(I<HASH>)>,
inside a C<while> condition [perl #90888].

=item *

A problem with context propagation when a C<do> block is an argument to
C<return> has been fixed.  It used to cause C<undef> to be returned in
certain cases of a C<return> inside an C<if> block which itself is followed by
another C<return>.

=item *

Calling C<index> with a tainted constant no longer causes constants in
subsequently compiled code to become tainted [perl #64804].

=item *

Infinite loops like C<1 while 1> used to stop C<strict 'subs'> mode from
working for the rest of the block.

=item *

For list assignments like C<($a,$b) = ($b,$a)>, Perl has to make a copy of
the items on the right-hand side before assignment them to the left.  For
efficiency's sake, it assigns the values on the right straight to the items
on the left if no one variable is mentioned on both sides, as in C<($a,$b) =
($c,$d)>.  The logic for determining when it can cheat was faulty, in that
C<&&> and C<||> on the right-hand side could fool it.  So C<($a,$b) =
$some_true_value && ($b,$a)> would end up assigning the value of C<$b> to
both scalars.

=item *

Perl no longer tries to apply lvalue context to the string in
C<("string", $variable) ||= 1> (which used to be an error).  Since the
left-hand side of C<||=> is evaluated in scalar context, that's a scalar
comma operator, which gives all but the last item void context.  There is
no such thing as void lvalue context, so it was a mistake for Perl to try
to force it [perl #96942].

=item *

C<caller> no longer leaks memory when called from the DB package if
C<@DB::args> was assigned to after the first call to C<caller>.  L<Carp>
was triggering this bug [perl #97010]. (5.14.2)

=item *

C<close> and similar filehandle functions, when called on built-in global
variables (like C<$+>), used to die if the variable happened to hold the
undefined value, instead of producing the usual "Use of uninitialized
value" warning.

=item *

When autovivified file handles were introduced in Perl 5.6.0, C<readline>
was inadvertently made to autovivify when called as C<readline($foo)> (but
not as C<E<lt>$fooE<gt>>).  It has now been fixed never to autovivify.

=item *

Calling an undefined anonymous subroutine (e.g., what $x holds after
C<undef &{$x = sub{}}>) used to cause a "Not a CODE reference" error, which
has been corrected to "Undefined subroutine called" [perl #71154].

=item *

Causing C<@DB::args> to be freed between uses of C<caller> no longer
results in a crash [perl #93320].

=item *

C<setpgrp($foo)> used to be equivalent to C<($foo, setpgrp)>, because
C<setpgrp> was ignoring its argument if there was just one.  Now it is
equivalent to C<setpgrp($foo,0)>.

=item *

C<shmread> was not setting the scalar flags correctly when reading from
shared memory, causing the existing cached numeric representation in the
scalar to persist [perl #98480].

=item *

C<++> and C<--> now work on copies of globs, instead of dying.

=item *

C<splice()> doesn't warn when truncating

You can now limit the size of an array using C<splice(@a,MAX_LEN)> without
worrying about warnings.

=item *

C<< $$ >> is no longer tainted.  Since this value comes directly from
C<< getpid() >>, it is always safe.

=item *

The parser no longer leaks a filehandle if STDIN was closed before parsing
started [perl #37033].

=item *

C<< die; >> with a non-reference, non-string, or magical (e.g., tainted)
value in $@ now properly propagates that value [perl #111654].

=back

=head1 Known Problems

=over 4

=item *

On Solaris, we have two kinds of failure.

If F<make> is Sun's F<make>, we get an error about a badly formed macro
assignment in the F<Makefile>.  That happens when F<./Configure> tries to
make depends.  F<Configure> then exits 0, but further F<make>-ing fails.

If F<make> is F<gmake>, F<Configure> completes, then we get errors related
to F</usr/include/stdbool.h>

=item *

On Win32, a number of tests hang unless STDERR is redirected.  The cause of
this is still under investigation.

=item *

When building as root with a umask that prevents files from being
other-readable, F<t/op/filetest.t> will fail.  This is a test bug, not a
bug in perl's behavior.

=item *

Configuring with a recent gcc and link-time-optimization, such as
C<Configure -Doptimize='-O2 -flto'> fails
because the optimizer optimizes away some of Configure's tests.  A
workaround is to omit the C<-flto> flag when running Configure, but add
it back in while actually building, something like

sh Configure -Doptimize=-O2                                             
    make OPTIMIZE='-O2 -flto'

=item *

The following CPAN modules have test failures with perl 5.16.  Patches have
been submitted for all of these, so hopefully there will be new releases
soon:

=over

=item *

L<Date::Pcalc> version 6.1

=item *

L<Module::CPANTS::Analyse> version 0.85

This fails due to problems in L<Module::Find> 0.10 and L<File::MMagic>
1.27.

=item *

L<PerlIO::Util> version 0.72

=back

=head1 Acknowledgements

Perl 5.16.0 represents approximately 12 months of development since Perl
5.14.0 and contains approximately 590,000 lines of changes across 2,500
files from 139 authors.

Perl continues to flourish into its third decade thanks to a vibrant
community of users and developers.  The following people are known to
have contributed the improvements that became Perl 5.16.0:

Aaron Crane, Abhijit Menon-Sen, Abigail, Alan Haggai Alavi, Alberto
Simões, Alexandr Ciornii, Andreas König, Andy Dougherty, Aristotle
Pagaltzis, Bo Johansson, Bo Lindbergh, Breno G. de Oliveira, brian d
foy, Brian Fraser, Brian Greenfield, Carl Hayter, Chas. Owens,
Chia-liang Kao, Chip Salzenberg, Chris 'BinGOs' Williams, Christian
Hansen, Christopher J. Madsen, chromatic, Claes Jacobsson, Claudio
Ramirez, Craig A. Berry, Damian Conway, Daniel Kahn Gillmor, Darin
McBride, Dave Rolsky, David Cantrell, David Golden, David Leadbeater,
David Mitchell, Dee Newcum, Dennis Kaarsemaker, Dominic Hargreaves,
Douglas Christopher Wilson, Eric Brine, Father Chrysostomos, Florian
Ragwitz, Frederic Briere, George Greer, Gerard Goossen, Gisle Aas,
H.Merijn Brand, Hojung Youn, Ian Goodacre, James E Keenan, Jan Dubois,
Jerry D. Hedden, Jesse Luehrs, Jesse Vincent, Jilles Tjoelker, Jim
Cromie, Jim Meyering, Joel Berger, Johan Vromans, Johannes Plunien, John
Hawkinson, John P. Linderman, John Peacock, Joshua ben Jore, Juerd
Waalboer, Karl Williamson, Karthik Rajagopalan, Keith Thompson, Kevin J.
Woolley, Kevin Ryde, Laurent Dami, Leo Lapworth, Leon Brocard, Leon
Timmermans, Louis Strous, Lukas Mai, Marc Green, Marcel Grünauer, Mark
A.  Stratman, Mark Dootson, Mark Jason Dominus, Martin Hasch, Matthew
Horsfall, Max Maischein, Michael G Schwern, Michael Witten, Mike
Sheldrake, Moritz Lenz, Nicholas Clark, Niko Tyni, Nuno Carvalho, Pau
Amma, Paul Evans, Paul Green, Paul Johnson, Perlover, Peter John Acklam,
Peter Martini, Peter Scott, Phil Monsen, Pino Toscano, Rafael
Garcia-Suarez, Rainer Tammer, Reini Urban, Ricardo Signes, Robin Barker,
Rodolfo Carvalho, Salvador Fandiño, Sam Kimbrel, Samuel Thibault, Shawn
M Moore, Shigeya Suzuki, Shirakata Kentaro, Shlomi Fish, Sisyphus,
Slaven Rezic, Spiros Denaxas, Steffen Müller, Steffen Schwigon, Stephen
Bennett, Stephen Oberholtzer, Stevan Little, Steve Hay, Steve Peters,
Thomas Sibley, Thorsten Glaser, Timothe Litt, Todd Rinaldo, Tom
Christiansen, Tom Hukins, Tony Cook, Vadim Konovalov, Vincent Pit,
Vladimir Timofeev, Walt Mankowski, Yves Orton, Zefram, Zsbán Ambrus,
Ævar Arnfjörð Bjarmason.

The list above is almost certainly incomplete as it is automatically
generated from version control history.  In particular, it does not
include the names of the (very much appreciated) contributors who
reported issues to the Perl bug tracker.

Many of the changes included in this version originated in the CPAN
modules included in Perl's core.  We're grateful to the entire CPAN
community for helping Perl to flourish.

For a more complete list of all of Perl's historical contributors,
please see the F<AUTHORS> file in the Perl source distribution.

=head1 Reporting Bugs

If you find what you think is a bug, you might check the articles
recently posted to the comp.lang.perl.misc newsgroup and the perl
bug database at L<http://rt.perl.org/perlbug/>.  There may also be
information at L<http://www.perl.org/>, the Perl Home Page.

If you believe you have an unreported bug, please run the L<perlbug>
program included with your release.  Be sure to trim your bug down
to a tiny but sufficient test case.  Your bug report, along with the
output of C<perl -V>, will be sent off to perlbug@perl.org to be
analysed by the Perl porting team.

If the bug you are reporting has security implications, which make it
inappropriate to send to a publicly archived mailing list, then please
send it to perl5-security-report@perl.org.  This points to a closed
subscription unarchived mailing list, which includes all core
committers, who will be able to help assess the impact of issues, figure
out a resolution, and help co-ordinate the release of patches to
mitigate or fix the problem across all platforms on which Perl is
supported.  Please use this address only for security issues in the Perl
core, not for modules independently distributed on CPAN.

=head1 SEE ALSO

The F<Changes> file for an explanation of how to view exhaustive details
on what changed.

The F<INSTALL> file for how to build Perl.

The F<README> file for general stuff.

The F<Artistic> and F<Copying> files for copyright information.

=cut

=encoding utf8 =head1 NAME perl5160delta - what is new for perl v5.16.0 =head1 DESCRIPTION This document describes differences between the 5.14.0 release and the 5.16.0 release. If you are upgrading from an earlier release such as 5.12.0, first read L, which describes differences between 5.12.0 and 5.14.0. Some bug fixes in this release have been backported to later releases of 5.14.x. Those are indicated with the 5.14.x version in parentheses. =head1 Notice With the release of Perl 5.16.0, the 5.12.x series of releases is now out of its support period. There may be future 5.12.x releases, but only in the event of a critical security issue. Users of Perl 5.12 or earlier should consider upgrading to a more recent release of Perl. This policy is described in greater detail in L. =head1 Core Enhancements =head2 C> As of this release, version declarations like C now disable all features before enabling the new feature bundle. This means that the following holds true: use 5.016; # only 5.16 features enabled here use 5.014; # only 5.14 features enabled here (not 5.16) C and higher continue to enable strict, but explicit C and C now override the version declaration, even when they come first: no strict; use 5.012; # no strict here There is a new ":default" feature bundle that represents the set of features enabled before any version declaration or C has been seen. Version declarations below 5.10 now enable the ":default" feature set. This does not actually change the behavior of C, because features added to the ":default" set are those that were traditionally enabled by default, before they could be turned off. C<< no feature >> now resets to the default feature set. To disable all features (which is likely to be a pretty special-purpose request, since it presumably won't match any named set of semantics) you can now write C<< no feature ':all' >>. C<$[> is now disabled under C. It is part of the default feature set and can be turned on or off explicitly with C. =head2 C<__SUB__> The new C<__SUB__> token, available under the C feature (see L) or C, returns a reference to the current subroutine, making it easier to write recursive closures. =head2 New and Improved Built-ins =head3 More consistent C The C operator sometimes treats a string argument as a sequence of characters and sometimes as a sequence of bytes, depending on the internal encoding. The internal encoding is not supposed to make any difference, but there is code that relies on this inconsistency. The new C and C features (enabled under C) resolve this. The C feature causes C to treat the string always as Unicode. The C features provides a function, itself called C, which evaluates its argument always as a string of bytes. These features also fix oddities with source filters leaking to outer dynamic scopes. See L for more detail. =head3 C lvalue revamp =for comment Does this belong here, or under Incompatible Changes? When C is called in lvalue or potential lvalue context with two or three arguments, a special lvalue scalar is returned that modifies the original string (the first argument) when assigned to. Previously, the offsets (the second and third arguments) passed to C would be converted immediately to match the string, negative offsets being translated to positive and offsets beyond the end of the string being truncated. Now, the offsets are recorded without modification in the special lvalue scalar that is returned, and the original string is not even looked at by C itself, but only when the returned lvalue is read or modified. These changes result in an incompatible change: If the original string changes length after the call to C but before assignment to its return value, negative offsets will remember their position from the end of the string, affecting code like this: my $string = "string"; my $lvalue = \substr $string, -4, 2; print $$lvalue, "\n"; # prints "ri" $string = "bailing twine"; print $$lvalue, "\n"; # prints "wi"; used to print "il" The same thing happens with an omitted third argument. The returned lvalue will always extend to the end of the string, even if the string becomes longer. Since this change also allowed many bugs to be fixed (see L operator>), and since the behavior of negative offsets has never been specified, the change was deemed acceptable. =head3 Return value of C The value returned by C on a tied variable is now the actual scalar that holds the object to which the variable is tied. This lets ties be weakened with C. =head2 Unicode Support =head3 Supports (I) Unicode 6.1 Besides the addition of whole new scripts, and new characters in existing scripts, this new version of Unicode, as always, makes some changes to existing characters. One change that may trip up some applications is that the General Category of two characters in the Latin-1 range, PILCROW SIGN and SECTION SIGN, has been changed from Other_Symbol to Other_Punctuation. The same change has been made for a character in each of Tibetan, Ethiopic, and Aegean. The code points U+3248..U+324F (CIRCLED NUMBER TEN ON BLACK SQUARE through CIRCLED NUMBER EIGHTY ON BLACK SQUARE) have had their General Category changed from Other_Symbol to Other_Numeric. The Line Break property has changes for Hebrew and Japanese; and because of other changes in 6.1, the Perl regular expression construct C<\X> now works differently for some characters in Thai and Lao. New aliases (synonyms) have been defined for many property values; these, along with the previously existing ones, are all cross-indexed in L. The return value of C is affected by other changes: Code point Old Name New Name U+000A LINE FEED (LF) LINE FEED U+000C FORM FEED (FF) FORM FEED U+000D CARRIAGE RETURN (CR) CARRIAGE RETURN U+0085 NEXT LINE (NEL) NEXT LINE U+008E SINGLE-SHIFT 2 SINGLE-SHIFT-2 U+008F SINGLE-SHIFT 3 SINGLE-SHIFT-3 U+0091 PRIVATE USE 1 PRIVATE USE-1 U+0092 PRIVATE USE 2 PRIVATE USE-2 U+2118 SCRIPT CAPITAL P WEIERSTRASS ELLIPTIC FUNCTION Perl will accept any of these names as input, but C now returns the new name of each pair. The change for U+2118 is considered by Unicode to be a correction, that is the original name was a mistake (but again, it will remain forever valid to use it to refer to U+2118). But most of these changes are the fallout of the mistake Unicode 6.0 made in naming a character used in Japanese cell phones to be "BELL", which conflicts with the longstanding industry use of (and Unicode's recommendation to use) that name to mean the ASCII control character at U+0007. Therefore, that name has been deprecated in Perl since v5.14, and any use of it will raise a warning message (unless turned off). The name "ALERT" is now the preferred name for this code point, with "BEL" an acceptable short form. The name for the new cell phone character, at code point U+1F514, remains undefined in this version of Perl (hence we don't implement quite all of Unicode 6.1), but starting in v5.18, BELL will mean this character, and not U+0007. Unicode has taken steps to make sure that this sort of mistake does not happen again. The Standard now includes all generally accepted names and abbreviations for control characters, whereas previously it didn't (though there were recommended names for most of them, which Perl used). This means that most of those recommended names are now officially in the Standard. Unicode did not recommend names for the four code points listed above between U+008E and U+008F, and in standardizing them Unicode subtly changed the names that Perl had previously given them, by replacing the final blank in each name by a hyphen. Unicode also officially accepts names that Perl had deprecated, such as FILE SEPARATOR. Now the only deprecated name is BELL. Finally, Perl now uses the new official names instead of the old (now considered obsolete) names for the first four code points in the list above (the ones which have the parentheses in them). Now that the names have been placed in the Unicode standard, these kinds of changes should not happen again, though corrections, such as to U+2118, are still possible. Unicode also added some name abbreviations, which Perl now accepts: SP for SPACE; TAB for CHARACTER TABULATION; NEW LINE, END OF LINE, NL, and EOL for LINE FEED; LOCKING-SHIFT ONE for SHIFT OUT; LOCKING-SHIFT ZERO for SHIFT IN; and ZWNBSP for ZERO WIDTH NO-BREAK SPACE. More details on this version of Unicode are provided in L. =head3 C is no longer needed for C<\N{I}> When C<\N{I}> is encountered, the C module is now automatically loaded when needed as if the C<:full> and C<:short> options had been specified. See L for more information. =head3 C<\N{...}> can now have Unicode loose name matching This is described in the C item in L below. =head3 Unicode Symbol Names Perl now has proper support for Unicode in symbol names. It used to be that C<*{$foo}> would ignore the internal UTF8 flag and use the bytes of the underlying representation to look up the symbol. That meant that C<*{"\x{100}"}> and C<*{"\xc4\x80"}> would return the same thing. All these parts of Perl have been fixed to account for Unicode: =over =item * Method names (including those passed to C) =item * Typeglob names (including names of variables, subroutines, and filehandles) =item * Package names =item * C =item * Symbolic dereferencing =item * Second argument to C and C =item * Return value of C =item * Subroutine prototypes =item * Attributes =item * Various warnings and error messages that mention variable names or values, methods, etc. =back In addition, a parsing bug has been fixed that prevented C<*{é}> from implicitly quoting the name, but instead interpreted it as C<*{+é}>, which would cause a strict violation. C<*{"*a::b"}> automatically strips off the * if it is followed by an ASCII letter. That has been extended to all Unicode identifier characters. One-character non-ASCII non-punctuation variables (like C<$é>) are now subject to "Used only once" warnings. They used to be exempt, as they were treated as punctuation variables. Also, single-character Unicode punctuation variables (like C<$‰>) are now supported [perl #69032]. =head3 Improved ability to mix locales and Unicode, including UTF-8 locales An optional parameter has been added to C use locale ':not_characters'; which tells Perl to use all but the C and C portions of the current locale. Instead, the character set is assumed to be Unicode. This lets locales and Unicode be seamlessly mixed, including the increasingly frequent UTF-8 locales. When using this hybrid form of locales, the C<:locale> layer to the L pragma can be used to interface with the file system, and there are CPAN modules available for ARGV and environment variable conversions. Full details are in L. =head3 New function C and corresponding escape sequence C<\F> for Unicode foldcase Unicode foldcase is an extension to lowercase that gives better results when comparing two strings case-insensitively. It has long been used internally in regular expression C matching. Now it is available explicitly through the new C function call (enabled by S>, or C, or explicitly callable via C) or through the new C<\F> sequence in double-quotish strings. Full details are in L. =head3 The Unicode C property is now supported. New in Unicode 6.0, this is an improved C